Linux.mandriva : problème avec modprobe yenta_socket
Posté par chl (page perso, ) le 26 juillet 2005
Cher Forum,
Je suis sous Cooker avec le noyeau 2.6.12-7mdk-i686-up-4GB. J'ai un léger problème avec une carte contrôleur SATA PCMCIA. J'ai essayé avec plusieurs noyaux, mais étant donné la longueur des messages d'erreurs, je n'envoie que ceux pour un seul noyau.
Voici l'erreur que j'obtiens en tapant :
modprobe yenta_socket
Comme il y a un message : "Please try using pci=biosirq", j'ajoute cet argument au kernel, je reboot, je relance la commande modprobe yenta_socket, et voici le résultat :
Cette fois ci, je n'ai plus le "Please try using pci=biosirq", mais cela ne marche toujours pas mieux. Je fait un peu de google, et je trouve une page qui me dit d'essayer de faire un :
modprobe yenta_socket override_bios=1
C'est ce que je fais apres avoir rebooté sur le même noyau (avec l'option pci=biosirq), voici le résultat :
Si quelqu'un avait une piste, je serais preneur. Car pour le moment je suis dans l'impasse.
Et encore une fois désolé pour la longueur des erreurs...
Merci d'avance,
Chl
Je suis sous Cooker avec le noyeau 2.6.12-7mdk-i686-up-4GB. J'ai un léger problème avec une carte contrôleur SATA PCMCIA. J'ai essayé avec plusieurs noyaux, mais étant donné la longueur des messages d'erreurs, je n'envoie que ceux pour un seul noyau.
Voici l'erreur que j'obtiens en tapant :
modprobe yenta_socket
kernel: Linux Kernel Card Services
kernel: options: [pci] [cardbus] [pm]
kernel: Yenta: CardBus bridge found at 0000:02:04.0 [1025:003c]
kernel: Yenta: Using CSCINT to route CSC interrupts to PCI
kernel: Yenta: Routing CardBus interrupts to PCI
kernel: Yenta TI: socket 0000:02:04.0, mfunc 0x001c1112, devctl 0x44
kernel: irq 11: nobody cared!
kernel: [dump_stack+30/32] dump_stack+0x1e/0x20
kernel: [] dump_stack+0x1e/0x20
kernel: [__report_bad_irq+43/160] __report_bad_irq+0x2b/0xa0
kernel: [] __report_bad_irq+0x2b/0xa0
kernel: [note_interrupt+120/160] note_interrupt+0x78/0xa0
kernel: [] note_interrupt+0x78/0xa0
kernel: [__do_IRQ+224/240] __do_IRQ+0xe0/0xf0
kernel: [] __do_IRQ+0xe0/0xf0
kernel: [do_IRQ+28/48] do_IRQ+0x1c/0x30
kernel: [] do_IRQ+0x1c/0x30
kernel: [common_interrupt+26/32] common_interrupt+0x1a/0x20
kernel: [] common_interrupt+0x1a/0x20
kernel: [__do_IRQ+154/240] __do_IRQ+0x9a/0xf0
kernel: [] __do_IRQ+0x9a/0xf0
kernel: [do_IRQ+28/48] do_IRQ+0x1c/0x30
kernel: [] do_IRQ+0x1c/0x30
kernel: [common_interrupt+26/32] common_interrupt+0x1a/0x20
kernel: [] common_interrupt+0x1a/0x20
kernel: [do_softirq+42/48] do_softirq+0x2a/0x30
kernel: [] do_softirq+0x2a/0x30
kernel: [do_IRQ+33/48] do_IRQ+0x21/0x30
kernel: [] do_IRQ+0x21/0x30
kernel: [common_interrupt+26/32] common_interrupt+0x1a/0x20
kernel: [] common_interrupt+0x1a/0x20
kernel: [do_syslog+646/896] do_syslog+0x286/0x380
kernel: [] do_syslog+0x286/0x380
kernel: [vfs_read+168/400] vfs_read+0xa8/0x190
kernel: [] vfs_read+0xa8/0x190
kernel: [sys_read+71/112] sys_read+0x47/0x70
kernel: [] sys_read+0x47/0x70
kernel: [sysenter_past_esp+84/117] sysenter_past_esp+0x54/0x75
kernel: [] sysenter_past_esp+0x54/0x75
kernel: handlers:
kernel: [pg0+544810768/1068889088] (usb_hcd_irq+0x0/0x80 [usbcore])
kernel: [] (usb_hcd_irq+0x0/0x80 [usbcore])
kernel: [pg0+544810768/1068889088] (usb_hcd_irq+0x0/0x80 [usbcore])
kernel: [] (usb_hcd_irq+0x0/0x80 [usbcore])
kernel: [pg0+544810768/1068889088] (usb_hcd_irq+0x0/0x80 [usbcore])
kernel: [] (usb_hcd_irq+0x0/0x80 [usbcore])
kernel: [pg0+547262448/1068889088] (rtl8139_interrupt+0x0/0x1c0 [8139too])
kernel: [] (rtl8139_interrupt+0x0/0x1c0 [8139too])
kernel: [pg0+547818784/1068889088] (i810_interrupt+0x0/0xa0 [i810_audio])
kernel: [] (i810_interrupt+0x0/0xa0 [i810_audio])
kernel: [pg0+547923040/1068889088] (radeon_driver_irq_handler+0x0/0xc0 [radeon])
kernel: [] (radeon_driver_irq_handler+0x0/0xc0 [radeon])
kernel: Disabling IRQ #11
kernel: Yenta TI: socket 0000:02:04.0 probing PCI interrupt failed, trying to fix
kernel: Yenta TI: socket 0000:02:04.0 no PCI interrupts. Fish. Please report.
kernel: Yenta: ISA IRQ mask 0x0208, PCI irq 0
kernel: Socket status: 30000020
kernel: PCI: Enabling device 0000:03:00.0 (0000 -> 0003)
kernel: PCI: No IRQ known for interrupt pin A of device 0000:03:00.0. Please try using pci=biosirq.
kernel: sata_sil(0000:03:00.0): cache line size not set. Driver may not function
kernel: ata1: SATA max UDMA/100 cmd 0xE0F56080 ctl 0xE0F5608A bmdma 0xE0F56000 irq 0
kernel: ata2: SATA max UDMA/100 cmd 0xE0F560C0 ctl 0xE0F560CA bmdma 0xE0F56008 irq 0
kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000048
kernel: printing eip:
kernel: c01f754c
kernel: *pde = 00000000
kernel: Oops: 0000 [#1]
kernel: Modules linked in: sata_sil libata yenta_socket rsrc_nonstatic pcmcia_core cpufreq_ondemand cpufreq_powersave speedstep_centrino freq_table processor radeon drm nls_iso8859_15 nls_cp850 i810_audio ac97_codec soundcore ipt_pkttype ipt_CONNMARK ipt_MARK ipt_connmark ipt_owner ipt_iprange ipt_physdev ipt_multiport ipt_conntrack iptable_mangle ip_nat_irc ip_nat_tftp ip_nat_ftp iptable_nat ip_conntrack_irc ip_conntrack_tftp ip_conntrack_ftp ip_conntrack iptable_filter ip_tables 8139too mii af_packet ide_cd ohci1394 loop supermount vfat fat intel_agp agpgart nvram eth1394 ieee1394 sr_mod ide_scsi scsi_mod usbmouse usbhid ehci_hcd uhci_hcd usbcore joydev tsdev evdev ext3 jbd
kernel: CPU: 0
kernel: EIP: 0060:[sysfs_hash_and_remove+12/247] Not tainted VLI
kernel: EIP: 0060:[] Not tainted VLI
kernel: EFLAGS: 00010282 (2.6.12-7mdk-i686-up-4GB)
kernel: EIP is at sysfs_hash_and_remove+0xc/0xf7
kernel: eax: 00000000 ebx: d1d8019c ecx: d1d80004 edx: e0c95788
kernel: esi: d1d80194 edi: c0378089 ebp: cdd01d68 esp: cdd01d4c
kernel: ds: 007b es: 007b ss: 0068
kernel: Process modprobe (pid: 7567, threadinfo=cdd00000 task=cdd4b5a0)
kernel: Stack: e10158f0 cdd01dd0 00000246 cdd01d80 d1d8019c d1d80194 c0378089 cdd01d8c
kernel: c0288b90 00000000 c0378089 e0c95720 e0c95788 d1d80194 d1d800e0 00000002
kernel: cdd01d9c c0288bf2 d1d80194 d1d80194 cdd01db4 e0c7b499 d1d80194 00000000
kernel: Call Trace:
kernel: [show_stack+171/240] show_stack+0xab/0xf0
kernel: [] show_stack+0xab/0xf0
kernel: [show_registers+364/512] show_registers+0x16c/0x200
kernel: [] show_registers+0x16c/0x200
kernel: [die+200/336] die+0xc8/0x150
kernel: [] die+0xc8/0x150
kernel: [do_page_fault+594/1792] do_page_fault+0x252/0x700
kernel: [] do_page_fault+0x252/0x700
kernel: [error_code+79/84] error_code+0x4f/0x54
kernel: [] error_code+0x4f/0x54
kernel: [class_device_del+144/224] class_device_del+0x90/0xe0
kernel: [] class_device_del+0x90/0xe0
kernel: [class_device_unregister+18/32] class_device_unregister+0x12/0x20
kernel: [] class_device_unregister+0x12/0x20
kernel: [pg0+545113241/1068889088] scsi_remove_host+0x59/0x70 [scsi_mod]
kernel: [] scsi_remove_host+0x59/0x70 [scsi_mod]
kernel: [pg0+548879819/1068889088] ata_host_remove+0x1b/0x30 [libata]
kernel: [] ata_host_remove+0x1b/0x30 [libata]
kernel: [pg0+548880949/1068889088] ata_device_add+0x255/0x2b0 [libata]
kernel: [] ata_device_add+0x255/0x2b0 [libata]
kernel: [pg0+548078945/1068889088] sil_init_one+0x271/0x390 [sata_sil]
kernel: [] sil_init_one+0x271/0x390 [sata_sil]
kernel: [pci_device_probe_static+66/80] pci_device_probe_static+0x42/0x50
kernel: [] pci_device_probe_static+0x42/0x50
kernel: [__pci_device_probe+56/96] __pci_device_probe+0x38/0x60
kernel: [] __pci_device_probe+0x38/0x60
kernel: [pci_device_probe+44/80] pci_device_probe+0x2c/0x50
kernel: [] pci_device_probe+0x2c/0x50
kernel: [driver_probe_device+46/128] driver_probe_device+0x2e/0x80
kernel: [] driver_probe_device+0x2e/0x80
kernel: [driver_attach+90/144] driver_attach+0x5a/0x90
kernel: [] driver_attach+0x5a/0x90
kernel: [bus_add_driver+149/208] bus_add_driver+0x95/0xd0
kernel: [] bus_add_driver+0x95/0xd0
kernel: [pci_register_driver+95/144] pci_register_driver+0x5f/0x90
kernel: [] pci_register_driver+0x5f/0x90
kernel: [pg0+547803154/1068889088] sil_init+0x12/0x14 [sata_sil]
kernel: [] sil_init+0x12/0x14 [sata_sil]
kernel: [sys_init_module+227/624] sys_init_module+0xe3/0x270
kernel: [] sys_init_module+0xe3/0x270
kernel: [sysenter_past_esp+84/117] sysenter_past_esp+0x54/0x75
kernel: [] sysenter_past_esp+0x54/0x75
kernel: Code: 8b 5d f8 8b 46 08 8b 75 fc 89 45 08 89 ec 5d e9 3b 12 fe ff 8d 74 26 00 8d bc 27 00 00 00 00 55 89 e5 57 56 53 83 ec 10 8b 45 08 <8b> 50 48 8b 48 08 ff 49 70 0f 88 dc 00 00 00 8b 42 0c 8d 58 fc
pci.agent[7549]: ... can't load module sata_sil
pci.agent[7549]: missing kernel or user mode driver sata_sil
Comme il y a un message : "Please try using pci=biosirq", j'ajoute cet argument au kernel, je reboot, je relance la commande modprobe yenta_socket, et voici le résultat :
kernel: Linux Kernel Card Services
kernel: options: [pci] [cardbus] [pm]
kernel: Yenta: CardBus bridge found at 0000:02:04.0 [1025:003c]
kernel: Yenta: Using CSCINT to route CSC interrupts to PCI
kernel: Yenta: Routing CardBus interrupts to PCI
kernel: Yenta TI: socket 0000:02:04.0, mfunc 0x001c1112, devctl 0x44
kernel: irq 11: nobody cared!
kernel: [dump_stack+30/32] dump_stack+0x1e/0x20
kernel: [] dump_stack+0x1e/0x20
kernel: [__report_bad_irq+43/160] __report_bad_irq+0x2b/0xa0
kernel: [] __report_bad_irq+0x2b/0xa0
kernel: [note_interrupt+120/160] note_interrupt+0x78/0xa0
kernel: [] note_interrupt+0x78/0xa0
kernel: [__do_IRQ+224/240] __do_IRQ+0xe0/0xf0
kernel: [] __do_IRQ+0xe0/0xf0
kernel: [do_IRQ+28/48] do_IRQ+0x1c/0x30
kernel: [] do_IRQ+0x1c/0x30
kernel: [common_interrupt+26/32] common_interrupt+0x1a/0x20
kernel: [] common_interrupt+0x1a/0x20
kernel: [do_softirq+42/48] do_softirq+0x2a/0x30
kernel: [] do_softirq+0x2a/0x30
kernel: [do_IRQ+33/48] do_IRQ+0x21/0x30
kernel: [] do_IRQ+0x21/0x30
kernel: [common_interrupt+26/32] common_interrupt+0x1a/0x20
kernel: [] common_interrupt+0x1a/0x20
kernel: [do_syslog+646/896] do_syslog+0x286/0x380
kernel: [] do_syslog+0x286/0x380
kernel: [vfs_read+168/400] vfs_read+0xa8/0x190
kernel: [] vfs_read+0xa8/0x190
kernel: [sys_read+71/112] sys_read+0x47/0x70
kernel: [] sys_read+0x47/0x70
kernel: [sysenter_past_esp+84/117] sysenter_past_esp+0x54/0x75
kernel: [] sysenter_past_esp+0x54/0x75
kernel: handlers:
kernel: [pg0+544810768/1068889088] (usb_hcd_irq+0x0/0x80 [usbcore])
kernel: [] (usb_hcd_irq+0x0/0x80 [usbcore])
kernel: [pg0+544810768/1068889088] (usb_hcd_irq+0x0/0x80 [usbcore])
kernel: [] (usb_hcd_irq+0x0/0x80 [usbcore])
kernel: [pg0+544810768/1068889088] (usb_hcd_irq+0x0/0x80 [usbcore])
kernel: [] (usb_hcd_irq+0x0/0x80 [usbcore])
kernel: [pg0+547131376/1068889088] (rtl8139_interrupt+0x0/0x1c0 [8139too])
kernel: [] (rtl8139_interrupt+0x0/0x1c0 [8139too])
kernel: [pg0+547876128/1068889088] (i810_interrupt+0x0/0xa0 [i810_audio])
kernel: [] (i810_interrupt+0x0/0xa0 [i810_audio])
kernel: [pg0+547955808/1068889088] (radeon_driver_irq_handler+0x0/0xc0 [radeon])
kernel: [] (radeon_driver_irq_handler+0x0/0xc0 [radeon])
kernel: Disabling IRQ #11
kernel: Yenta TI: socket 0000:02:04.0 probing PCI interrupt failed, trying to fix
kernel: Yenta TI: socket 0000:02:04.0 no PCI interrupts. Fish. Please report.
kernel: Yenta: ISA IRQ mask 0x00c0, PCI irq 0
kernel: Socket status: 30000020
kernel: PCI: Enabling device 0000:03:00.0 (0000 -> 0003)
kernel: PCI: No IRQ known for interrupt pin A of device 0000:03:00.0.
kernel: sata_sil(0000:03:00.0): cache line size not set. Driver may not function
kernel: ata1: SATA max UDMA/100 cmd 0xE0F5A080 ctl 0xE0F5A08A bmdma 0xE0F5A000 irq 0
kernel: ata2: SATA max UDMA/100 cmd 0xE0F5A0C0 ctl 0xE0F5A0CA bmdma 0xE0F5A008 irq 0
kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000048
kernel: printing eip:
kernel: c01f754c
kernel: *pde = 00000000
kernel: Oops: 0000 [#1]
kernel: Modules linked in: sata_sil libata yenta_socket rsrc_nonstatic pcmcia_core cpufreq_ondemand cpufreq_powersave speedstep_centrino freq_table processor radeon drm i810_audio ac97_codec soundcore ipt_pkttype ipt_CONNMARK ipt_MARK ipt_connmark ipt_owner ipt_iprange ipt_physdev ipt_multiport ipt_conntrack iptable_mangle ip_nat_irc ip_nat_tftp ip_nat_ftp iptable_nat ip_conntrack_irc ip_conntrack_tftp ip_conntrack_ftp ip_conntrack iptable_filter ip_tables 8139too mii af_packet ide_cd ohci1394 loop supermount nls_iso8859_15 nls_cp850 vfat fat intel_agp agpgart nvram sr_mod eth1394 ieee1394 ide_scsi scsi_mod usbmouse usbhid ehci_hcd uhci_hcd usbcore joydev evdev tsdev ext3 jbd
kernel: CPU: 0
kernel: EIP: 0060:[sysfs_hash_and_remove+12/247] Not tainted VLI
kernel: EIP: 0060:[] Not tainted VLI
kernel: EFLAGS: 00010282 (2.6.12-7mdk-i686-up-4GB)
kernel: EIP is at sysfs_hash_and_remove+0xc/0xf7
kernel: eax: 00000000 ebx: cf17119c ecx: cf171004 edx: e0c95788
kernel: esi: cf171194 edi: c0378089 ebp: ce7d5d68 esp: ce7d5d4c
kernel: ds: 007b es: 007b ss: 0068
kernel: Process modprobe (pid: 7872, threadinfo=ce7d4000 task=cfd4caa0)
kernel: Stack: e0f7a8f0 ce7d5dd0 00000246 ce7d5d80 cf17119c cf171194 c0378089 ce7d5d8c
kernel: c0288b90 00000000 c0378089 e0c95720 e0c95788 cf171194 cf1710e0 00000002
kernel: ce7d5d9c c0288bf2 cf171194 cf171194 ce7d5db4 e0c7b499 cf171194 00000000
kernel: Call Trace:
kernel: [show_stack+171/240] show_stack+0xab/0xf0
kernel: [] show_stack+0xab/0xf0
kernel: [show_registers+364/512] show_registers+0x16c/0x200
kernel: [] show_registers+0x16c/0x200
kernel: [die+200/336] die+0xc8/0x150
kernel: [] die+0xc8/0x150
kernel: [do_page_fault+594/1792] do_page_fault+0x252/0x700
kernel: [] do_page_fault+0x252/0x700
kernel: [error_code+79/84] error_code+0x4f/0x54
kernel: [] error_code+0x4f/0x54
kernel: [class_device_del+144/224] class_device_del+0x90/0xe0
kernel: [] class_device_del+0x90/0xe0
kernel: [class_device_unregister+18/32] class_device_unregister+0x12/0x20
kernel: [] class_device_unregister+0x12/0x20
kernel: [pg0+545113241/1068889088] scsi_remove_host+0x59/0x70 [scsi_mod]
kernel: [] scsi_remove_host+0x59/0x70 [scsi_mod]
kernel: [pg0+548244939/1068889088] ata_host_remove+0x1b/0x30 [libata]
kernel: [] ata_host_remove+0x1b/0x30 [libata]
kernel: [pg0+548246069/1068889088] ata_device_add+0x255/0x2b0 [libata]
kernel: [] ata_device_add+0x255/0x2b0 [libata]
kernel: [pg0+548140385/1068889088] sil_init_one+0x271/0x390 [sata_sil]
kernel: [] sil_init_one+0x271/0x390 [sata_sil]
kernel: [pci_device_probe_static+66/80] pci_device_probe_static+0x42/0x50
kernel: [] pci_device_probe_static+0x42/0x50
kernel: [__pci_device_probe+56/96] __pci_device_probe+0x38/0x60
kernel: [] __pci_device_probe+0x38/0x60
kernel: [pci_device_probe+44/80] pci_device_probe+0x2c/0x50
kernel: [] pci_device_probe+0x2c/0x50
kernel: [driver_probe_device+46/128] driver_probe_device+0x2e/0x80
kernel: [] driver_probe_device+0x2e/0x80
kernel: [driver_attach+90/144] driver_attach+0x5a/0x90
kernel: [] driver_attach+0x5a/0x90
kernel: [bus_add_driver+149/208] bus_add_driver+0x95/0xd0
kernel: [] bus_add_driver+0x95/0xd0
kernel: [pci_register_driver+95/144] pci_register_driver+0x5f/0x90
kernel: [] pci_register_driver+0x5f/0x90
kernel: [pg0+547717138/1068889088] sil_init+0x12/0x14 [sata_sil]
kernel: [] sil_init+0x12/0x14 [sata_sil]
kernel: [sys_init_module+227/624] sys_init_module+0xe3/0x270
kernel: [] sys_init_module+0xe3/0x270
kernel: [sysenter_past_esp+84/117] sysenter_past_esp+0x54/0x75
kernel: [] sysenter_past_esp+0x54/0x75
kernel: Code: 8b 5d f8 8b 46 08 8b 75 fc 89 45 08 89 ec 5d e9 3b 12 fe ff 8d 74 26 00 8d bc 27 00 00 00 00 55 89 e5 57 56 53 83 ec 10 8b 45 08 <8b> 50 48 8b 48 08 ff 49 70 0f 88 dc 00 00 00 8b 42 0c 8d 58 fc
pci.agent[7854]: ... can't load module sata_sil
pci.agent[7854]: missing kernel or user mode driver sata_sil
Cette fois ci, je n'ai plus le "Please try using pci=biosirq", mais cela ne marche toujours pas mieux. Je fait un peu de google, et je trouve une page qui me dit d'essayer de faire un :
modprobe yenta_socket override_bios=1
C'est ce que je fais apres avoir rebooté sur le même noyau (avec l'option pci=biosirq), voici le résultat :
kernel: Linux Kernel Card Services
kernel: options: [pci] [cardbus] [pm]
kernel: Yenta: CardBus bridge found at 0000:02:04.0 [1025:003c]
kernel: Yenta: Using CSCINT to route CSC interrupts to PCI
kernel: Yenta: Routing CardBus interrupts to PCI
kernel: Yenta TI: socket 0000:02:04.0, mfunc 0x001c1112, devctl 0x44
kernel: irq 11: nobody cared!
kernel: [dump_stack+30/32] dump_stack+0x1e/0x20
kernel: [] dump_stack+0x1e/0x20
kernel: [__report_bad_irq+43/160] __report_bad_irq+0x2b/0xa0
kernel: [] __report_bad_irq+0x2b/0xa0
kernel: [note_interrupt+120/160] note_interrupt+0x78/0xa0
kernel: [] note_interrupt+0x78/0xa0
kernel: [__do_IRQ+224/240] __do_IRQ+0xe0/0xf0
kernel: [] __do_IRQ+0xe0/0xf0
kernel: [do_IRQ+28/48] do_IRQ+0x1c/0x30
kernel: [] do_IRQ+0x1c/0x30
kernel: [common_interrupt+26/32] common_interrupt+0x1a/0x20
kernel: [] common_interrupt+0x1a/0x20
kernel: [__do_IRQ+154/240] __do_IRQ+0x9a/0xf0
kernel: [] __do_IRQ+0x9a/0xf0
kernel: [do_IRQ+28/48] do_IRQ+0x1c/0x30
kernel: [] do_IRQ+0x1c/0x30
kernel: [common_interrupt+26/32] common_interrupt+0x1a/0x20
kernel: [] common_interrupt+0x1a/0x20
kernel: [do_softirq+42/48] do_softirq+0x2a/0x30
kernel: [] do_softirq+0x2a/0x30
kernel: [do_IRQ+33/48] do_IRQ+0x21/0x30
kernel: [] do_IRQ+0x21/0x30
kernel: [common_interrupt+26/32] common_interrupt+0x1a/0x20
kernel: [] common_interrupt+0x1a/0x20
kernel: [do_syslog+646/896] do_syslog+0x286/0x380
kernel: [] do_syslog+0x286/0x380
kernel: [vfs_read+168/400] vfs_read+0xa8/0x190
kernel: [] vfs_read+0xa8/0x190
kernel: [sys_read+71/112] sys_read+0x47/0x70
kernel: [] sys_read+0x47/0x70
kernel: [sysenter_past_esp+84/117] sysenter_past_esp+0x54/0x75
kernel: [] sysenter_past_esp+0x54/0x75
kernel: handlers:
kernel: [pg0+544810768/1068889088] (usb_hcd_irq+0x0/0x80 [usbcore])
kernel: [] (usb_hcd_irq+0x0/0x80 [usbcore])
kernel: [pg0+544810768/1068889088] (usb_hcd_irq+0x0/0x80 [usbcore])
kernel: [] (usb_hcd_irq+0x0/0x80 [usbcore])
kernel: [pg0+544810768/1068889088] (usb_hcd_irq+0x0/0x80 [usbcore])
kernel: [] (usb_hcd_irq+0x0/0x80 [usbcore])
kernel: [pg0+547131376/1068889088] (rtl8139_interrupt+0x0/0x1c0 [8139too])
kernel: [] (rtl8139_interrupt+0x0/0x1c0 [8139too])
kernel: [pg0+547855648/1068889088] (i810_interrupt+0x0/0xa0 [i810_audio])
kernel: [] (i810_interrupt+0x0/0xa0 [i810_audio])
kernel: [pg0+547935328/1068889088] (radeon_driver_irq_handler+0x0/0xc0 [radeon])
kernel: [] (radeon_driver_irq_handler+0x0/0xc0 [radeon])
kernel: Disabling IRQ #11
kernel: Yenta TI: socket 0000:02:04.0 probing PCI interrupt failed, trying to fix
kernel: Yenta TI: socket 0000:02:04.0 no PCI interrupts. Fish. Please report.
kernel: Yenta: ISA IRQ mask 0x0020, PCI irq 0
kernel: Socket status: 30000020
kernel: PCI: Enabling device 0000:03:00.0 (0000 -> 0003)
kernel: PCI: No IRQ known for interrupt pin A of device 0000:03:00.0.
kernel: sata_sil(0000:03:00.0): cache line size not set. Driver may not function
kernel: ata1: SATA max UDMA/100 cmd 0xE0F5A080 ctl 0xE0F5A08A bmdma 0xE0F5A000 irq 0
kernel: ata2: SATA max UDMA/100 cmd 0xE0F5A0C0 ctl 0xE0F5A0CA bmdma 0xE0F5A008 irq 0
kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000048
kernel: printing eip:
kernel: c01f754c
kernel: *pde = 00000000
kernel: Oops: 0000 [#1]
kernel: Modules linked in: sata_sil libata yenta_socket rsrc_nonstatic pcmcia_core cpufreq_ondemand cpufreq_powersave speedstep_centrino freq_table processor radeon drm i810_audio ac97_codec soundcore ipt_pkttype ipt_CONNMARK ipt_MARK ipt_connmark ipt_owner ipt_iprange ipt_physdev ipt_multiport ipt_conntrack iptable_mangle ip_nat_irc ip_nat_tftp ip_nat_ftp iptable_nat ip_conntrack_irc ip_conntrack_tftp ip_conntrack_ftp ip_conntrack iptable_filter ip_tables 8139too mii af_packet ide_cd ohci1394 loop supermount nls_iso8859_15 nls_cp850 vfat fat intel_agp agpgart nvram sr_mod eth1394 ieee1394 ide_scsi scsi_mod usbmouse usbhid ehci_hcd uhci_hcd usbcore joydev evdev tsdev ext3 jbd
kernel: CPU: 0
kernel: EIP: 0060:[sysfs_hash_and_remove+12/247] Not tainted VLI
kernel: EIP: 0060:[] Not tainted VLI
kernel: EFLAGS: 00010282 (2.6.12-7mdk-i686-up-4GB)
kernel: EIP is at sysfs_hash_and_remove+0xc/0xf7
kernel: eax: 00000000 ebx: dbf2119c ecx: dbf21004 edx: e0c95788
kernel: esi: dbf21194 edi: c0378089 ebp: c9d23d68 esp: c9d23d4c
kernel: ds: 007b es: 007b ss: 0068
kernel: Process modprobe (pid: 7615, threadinfo=c9d22000 task=ca5fbaa0)
kernel: Stack: e10078f0 c9d23dd0 00000246 c9d23d80 dbf2119c dbf21194 c0378089 c9d23d8c
kernel: c0288b90 00000000 c0378089 e0c95720 e0c95788 dbf21194 dbf210e0 00000002
kernel: c9d23d9c c0288bf2 dbf21194 dbf21194 c9d23db4 e0c7b499 dbf21194 00000000
kernel: Call Trace:
kernel: [show_stack+171/240] show_stack+0xab/0xf0
kernel: [] show_stack+0xab/0xf0
kernel: [show_registers+364/512] show_registers+0x16c/0x200
kernel: [] show_registers+0x16c/0x200
kernel: [die+200/336] die+0xc8/0x150
kernel: [] die+0xc8/0x150
kernel: [do_page_fault+594/1792] do_page_fault+0x252/0x700
kernel: [] do_page_fault+0x252/0x700
kernel: [error_code+79/84] error_code+0x4f/0x54
kernel: [] error_code+0x4f/0x54
kernel: [class_device_del+144/224] class_device_del+0x90/0xe0
kernel: [] class_device_del+0x90/0xe0
kernel: [class_device_unregister+18/32] class_device_unregister+0x12/0x20
kernel: [] class_device_unregister+0x12/0x20
kernel: [pg0+545113241/1068889088] scsi_remove_host+0x59/0x70 [scsi_mod]
kernel: [] scsi_remove_host+0x59/0x70 [scsi_mod]
kernel: [pg0+548822475/1068889088] ata_host_remove+0x1b/0x30 [libata]
kernel: [] ata_host_remove+0x1b/0x30 [libata]
kernel: [pg0+548823605/1068889088] ata_device_add+0x255/0x2b0 [libata]
kernel: [] ata_device_add+0x255/0x2b0 [libata]
kernel: [pg0+548222305/1068889088] sil_init_one+0x271/0x390 [sata_sil]
kernel: [] sil_init_one+0x271/0x390 [sata_sil]
kernel: [pci_device_probe_static+66/80] pci_device_probe_static+0x42/0x50
kernel: [] pci_device_probe_static+0x42/0x50
kernel: [__pci_device_probe+56/96] __pci_device_probe+0x38/0x60
kernel: [] __pci_device_probe+0x38/0x60
kernel: [pci_device_probe+44/80] pci_device_probe+0x2c/0x50
kernel: [] pci_device_probe+0x2c/0x50
kernel: [driver_probe_device+46/128] driver_probe_device+0x2e/0x80
kernel: [] driver_probe_device+0x2e/0x80
kernel: [driver_attach+90/144] driver_attach+0x5a/0x90
kernel: [] driver_attach+0x5a/0x90
kernel: [bus_add_driver+149/208] bus_add_driver+0x95/0xd0
kernel: [] bus_add_driver+0x95/0xd0
kernel: [pci_register_driver+95/144] pci_register_driver+0x5f/0x90
kernel: [] pci_register_driver+0x5f/0x90
kernel: [pg0+547725330/1068889088] sil_init+0x12/0x14 [sata_sil]
kernel: [] sil_init+0x12/0x14 [sata_sil]
kernel: [sys_init_module+227/624] sys_init_module+0xe3/0x270
kernel: [] sys_init_module+0xe3/0x270
kernel: [sysenter_past_esp+84/117] sysenter_past_esp+0x54/0x75
kernel: [] sysenter_past_esp+0x54/0x75
kernel: Code: 8b 5d f8 8b 46 08 8b 75 fc 89 45 08 89 ec 5d e9 3b 12 fe ff 8d 74 26 00 8d bc 27 00 00 00 00 55 89 e5 57 56 53 83 ec 10 8b 45 08 <8b> 50 48 8b 48 08 ff 49 70 0f 88 dc 00 00 00 8b 42 0c 8d 58 fc
pci.agent[7597]: ... can't load module sata_sil
pci.agent[7597]: missing kernel or user mode driver sata_sil
Si quelqu'un avait une piste, je serais preneur. Car pour le moment je suis dans l'impasse.
Et encore une fois désolé pour la longueur des erreurs...
Merci d'avance,
Chl
> Lire le message (2 commentaires, moyenne: 2,5).
Vous avez demandé le commentaire #605226.
Run by 
Cette page a été générée par Templeet en 0.0417s (dont 0.0035 de SQL).
Cette page est peut-être conforme xhtml 1.0.
Information sur le site.
sur le net
si tu fais une recherche sur
kernel: irq 11: nobody cared!
tu verras qu'il y a du monde.
Il y a certainement des pistes du côté de l'acpi et compagnie.
[^]Re: sur le net
Bon ben meme si j'avais deja cherché, j'ai continué a chercher ... et finalement j'ai retiré l'acpi=off des options de mon kernel et maintenant ça marche !!!
MERCI !! :)