Forum Linux.mandriva mandriva 2011 et wacom bamboo pen & touch

il y a quelque mois j'avais posté  car j'airrivai pas à faire fonctionner ma tablette wacom bamboo pen & touch sous mandriva 2010.
N'ayant pas réussit j'avais laissé tombé.

comme je viens de passé sous la mandriva 2011, je re-tente mon installation config de la tablette.

    [root@localhost ~]# cat /etc/mandrake-release
    Mandriva Linux release 2011.0 (Official) for x86_64                                                                                         
    [root@localhost ~]# uname -a
    Linux localhost.localdomain 2.6.39.4-5.1-desktop #1 SMP Wed Jan 4 14:50:33 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux   

J'ai installé les package:

x11-driver-input-wacom
Version : 0.13.0-1-mdv2011.0
Version actuellement installée : 0.13.0-1
Groupe : Système/X11
Architecture : x86_64

et

    x11-driver-input-wacom-devel
    Version : 0.13.0-1-mdv2011.0
    Version actuellement installée : 0.13.0-1
    Groupe : Développement/X11
    Architecture : x86_64

Quand je la branche un DMESG me donne:

[  733.686914] usb 2-1.1: new full speed USB device number 5 using ehci_hcd
[  733.775925] usb 2-1.1: New USB device found, idVendor=056a, idProduct=00df
[  733.775929] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  733.775933] usb 2-1.1: Product: CTH-670
[  733.775934] usb 2-1.1: Manufacturer: Wacom Co.,Ltd.

Donc elle semble à moitié reconnu, mais juque la elle ne fonctionne pas

    [root@localhost ~]# cat /proc/bus/input/devices
    I: Bus=0019 Vendor=0000 Product=0003 Version=0000
    N: Name="Sleep Button"
    P: Phys=PNP0C0E/button/input0
    S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
    U: Uniq=
    H: Handlers=kbd event0
    B: PROP=0
    B: EV=3
    B: KEY=4000 0 0

    I: Bus=0019 Vendor=0000 Product=0005 Version=0000
    N: Name="Lid Switch"
    P: Phys=PNP0C0D/button/input0
    S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    U: Uniq=
    H: Handlers=event1
    B: PROP=0
    B: EV=21
    B: SW=1

    I: Bus=0019 Vendor=0000 Product=0001 Version=0000
    N: Name="Power Button"
    P: Phys=LNXPWRBN/button/input0
    S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    U: Uniq=
    H: Handlers=kbd event2
    B: PROP=0
    B: EV=3
    B: KEY=10000000000000 0

    I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
    N: Name="AT Translated Set 2 keyboard"
    P: Phys=isa0060/serio0/input0
    S: Sysfs=/devices/platform/i8042/serio0/input/input3
    U: Uniq=
    H: Handlers=sysrq kbd event3
    B: PROP=0
    B: EV=120013
    B: KEY=20000 20 0 0 500f02100002 3803078f900d401 feffffdfffefffff fffffffffffffffe
    B: MSC=10
    B: LED=7

    I: Bus=0011 Vendor=0002 Product=0007 Version=01b1
    N: Name="SynPS/2 Synaptics TouchPad"
    P: Phys=isa0060/serio4/input0
    S: Sysfs=/devices/platform/i8042/serio4/input/input4
    U: Uniq=
    H: Handlers=mouse0 event4
    B: PROP=d
    B: EV=b
    B: KEY=6420 10000 0 0 0 0
    B: ABS=260800011000003

    I: Bus=0019 Vendor=0000 Product=0000 Version=0000
    N: Name="ST LIS3LV02DL Accelerometer"
    P: Phys=lis3lv02d/input0
    S: Sysfs=/devices/platform/lis3lv02d/input/input5
    U: Uniq=
    H: Handlers=event5 js0
    B: PROP=0
    B: EV=9
    B: ABS=7

    I: Bus=0003 Vendor=0461 Product=4db6 Version=0004
    N: Name="Villem"
    P: Phys=usb-0000:00:1a.0-1.5/button
    S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input6
    U: Uniq=
    H: Handlers=kbd event6
    B: PROP=0
    B: EV=3
    B: KEY=100000 0 0 0

    I: Bus=0019 Vendor=0000 Product=0000 Version=0000
    N: Name="HP WMI hotkeys"
    P: Phys=wmi/input0
    S: Sysfs=/devices/virtual/input/input7
    U: Uniq=
    H: Handlers=kbd event7
    B: PROP=0
    B: EV=33
    B: KEY=4000000000 0 1000700000000 2100400 0 0
    B: MSC=10
    B: SW=22

    I: Bus=0000 Vendor=0000 Product=0000 Version=0000
    N: Name="HDA Intel Mic at Ext Right Jack"
    P: Phys=ALSA
    S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    U: Uniq=
    H: Handlers=event8
    B: PROP=0
    B: EV=21
    B: SW=10

    I: Bus=0000 Vendor=0000 Product=0000 Version=0000
    N: Name="HDA Intel HP Out at Ext Right Jack"
    P: Phys=ALSA
    S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    U: Uniq=
    H: Handlers=event9
    B: PROP=0
    B: EV=21
    B: SW=4

    I: Bus=0019 Vendor=0000 Product=0006 Version=0000
    N: Name="Video Bus"
    P: Phys=LNXVIDEO/video/input0
    S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10
    U: Uniq=
    H: Handlers=kbd event10
    B: PROP=0
    B: EV=3
    B: KEY=3e000b00000000 0 0 0

    I: Bus=0003 Vendor=046d Product=c404 Version=0110
    N: Name="Logitech Trackball"
    P: Phys=usb-0000:00:1d.0-1.2/input0
    S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input11
    U: Uniq=
    H: Handlers=mouse1 event11
    B: PROP=0
    B: EV=17
    B: KEY=70000 0 0 0 0
    B: REL=103
    B: MSC=10

    I: Bus=0003 Vendor=24ae Product=2000 Version=0101
    N: Name="RAPOO RAPOO 2.4G Wireless Device"
    P: Phys=usb-0000:00:1d.0-1.3/input0
    S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input12
    U: Uniq=
    H: Handlers=sysrq kbd event12
    B: PROP=0
    B: EV=120013
    B: KEY=1000000000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe
    B: MSC=10
    B: LED=1f

    I: Bus=0003 Vendor=24ae Product=2000 Version=0101
    N: Name="RAPOO RAPOO 2.4G Wireless Device"
    P: Phys=usb-0000:00:1d.0-1.3/input1
    S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input13
    U: Uniq=
    H: Handlers=kbd mouse2 event13
    B: PROP=0
    B: EV=1f
    B: KEY=837fff002c3027 bf00444400000000 1f0001 f848b27c000 667bfad941dfed 9e000000000000 0
    B: REL=1c3
    B: ABS=100000000
    B: MSC=10

elle n'apparait pas.

Et sous ccm > matériel elle n'apparait pas?

Vous auriez un idée?