Forum Linux.suse Opensuse plante à la sortie de mise en veille

Posté par Flu le 02 novembre 2014 à 03:10. Licence CC By‑SA.

Étiquettes :

nov.

2014

Bonjour

quand je sort de veille, j'ai l’écran gris avec le caméléon, je bouge la souris pour revenir sur le bureau, mais rien ne se passe, je reste avec cette écran, au bout de 3 minutes le curseur se fige, obligé de redémarrer le pc manuellement.

Je suis sur la version 13.1, kde

Comment corriger ce problème ?

Merci.

# Une piste :

Posté par Tanouky le 02 novembre 2014 à 15:10. Évalué à 1.

Tout d'abord, consulte tes logs. Ensuite, on avisera.

J'avais le même problème sur mon netbook, je l'ai solutionné en changeant de noyau ou de pilote de carte graphique (les deux fonctionnaient). Mais rien ne dit que c'est la bonne solution en ce qui te concerne. Qui plus est, davantage de données sur ton matériel peuvent aider.

# pilotes

Posté par kursus_hc le 03 novembre 2014 à 12:53. Évalué à 2.

Essaye de préciser ton modèle de carte

lspci -vnn | grep VGA

et le pilote actif :

lshw -c video | grep conf

[^] # Re: pilotes

Posté par Flu le 03 novembre 2014 à 13:56. Évalué à 1. Dernière modification le 03 novembre 2014 à 19:13.

lspci -vnn | grep VG
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF119 [GeForce GT 520] [10de:1040] (rev a1) (prog-if 00 [VGA controller])

Pour la deuxième commande, j'ai tapé (lshw -c video | grep conf)
pas de résultat.

Tanouky, je sais pas comment on fait pour consulter ses logs,
quelle est la ligne de commande pour les infos matériels ?

Je voudrais préciser que si ça à un rapport avec la carte graphique, je ne veux pas du pilote propriétaire.
J'avais pas ce soucis avec le pilote libre, ce problème est apparu que récemment.

[^] # Re: pilotes

Posté par kursus_hc le 03 novembre 2014 à 14:06. Évalué à 2.

Je voudrais préciser que si ça à un rapport avec la carte graphique, je ne veux pas du pilote propriétaire.

Ha oui c'est bien de préciser ! Ca doit sûrement venir de ça même si Nouveau est supposé gérer le suspend to ram et le suspend to disk.

Tu peux jeter un oeil ici et ici

Pour les logs Xorg :

cat /var/log/Xorg.0.log

[^] # Re: pilotes

Posté par Flu le 03 novembre 2014 à 14:13. Évalué à 1. Dernière modification le 03 novembre 2014 à 19:14.

Merci pour liens, mais c'est trop technique.

Voici le log:

cat /var/log/Xorg.0.log
[    12.622] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[    12.622] 
X.Org X Server 1.14.3.901 (1.14.4 RC 1)
Release Date: 2013-10-26
[    12.622] X Protocol Version 11, Revision 0
[    12.622] Build Operating System: openSUSE SUSE LINUX
[    12.622] Current Operating System: Linux linux-4ho7 3.11.10-21-desktop #1 SMP PREEMPT Mon Jul 21 15:28:46 UTC 2014 (9a9565d) x86_64
[    12.622] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.10-21-desktop root=UUID=dc982274-99cd-406f-9abb-0a855dac525b resume=/dev/disk/by-id/ata-Hitachi_HDS721010CLA632_JP2940J834B0MV-part2 splash=silent quiet showopts
[    12.622] Build Date: 17 April 2014  05:37:34AM
[    12.622]  
[    12.622] Current version of pixman: 0.30.2
[    12.622]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    12.622] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    12.622] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov  3 13:36:01 2014
[    12.622] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    12.622] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    12.622] (==) No Layout section.  Using the first Screen section.
[    12.622] (==) No screen section available. Using defaults.
[    12.622] (**) |-->Screen "Default Screen Section" (0)
[    12.622] (**) |   |-->Monitor "<default monitor>"
[    12.622] (==) No device specified for screen "Default Screen Section".
        Using the first device section listed.
[    12.622] (**) |   |-->Device "nvidia card"
[    12.622] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    12.622] (==) Automatically adding devices
[    12.622] (==) Automatically enabling devices
[    12.622] (==) Automatically adding GPU devices
[    12.629] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.                                                                                                        
[    12.629]    Entry deleted from font path.                                                                                                                                      
[    12.629] (==) FontPath set to:                                                                                                                                                 
        /usr/share/fonts/misc:unscaled,                                                                                                                                            
        /usr/share/fonts/Type1/,
        /usr/share/fonts/100dpi:unscaled,
        /usr/share/fonts/75dpi:unscaled,
        /usr/share/fonts/ghostscript/,
        /usr/share/fonts/cyrillic:unscaled,
        /usr/share/fonts/truetype/,
        built-ins
[    12.629] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules"
[    12.629] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    12.629] (II) Loader magic: 0x803c20
[    12.629] (II) Module ABI versions:
[    12.629]    X.Org ANSI C Emulation: 0.4
[    12.629]    X.Org Video Driver: 14.1
[    12.629]    X.Org XInput driver : 19.1
[    12.629]    X.Org Server Extension : 7.0
[    12.629] (II) xfree86: Adding drm device (/dev/dri/card0)
[    12.630] (--) PCI:*(0:1:0:0) 10de:1040:1b0a:90aa rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/134217728, 0xd8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    12.630] Initializing built-in extension Generic Event Extension
[    12.630] Initializing built-in extension SHAPE
[    12.630] Initializing built-in extension MIT-SHM
[    12.630] Initializing built-in extension XInputExtension
[    12.630] Initializing built-in extension XTEST
[    12.630] Initializing built-in extension BIG-REQUESTS
[    12.630] Initializing built-in extension SYNC
[    12.630] Initializing built-in extension XKEYBOARD
[    12.630] Initializing built-in extension XC-MISC
[    12.630] Initializing built-in extension SECURITY
[    12.630] Initializing built-in extension XINERAMA
[    12.630] Initializing built-in extension XFIXES
[    12.630] Initializing built-in extension RENDER
[    12.630] Initializing built-in extension RANDR
[    12.630] Initializing built-in extension COMPOSITE
[    12.630] Initializing built-in extension DAMAGE
[    12.630] Initializing built-in extension MIT-SCREEN-SAVER
[    12.630] Initializing built-in extension DOUBLE-BUFFER
[    12.630] Initializing built-in extension RECORD
[    12.630] Initializing built-in extension DPMS
[    12.630] Initializing built-in extension X-Resource
[    12.630] Initializing built-in extension XVideo
[    12.630] Initializing built-in extension XVideo-MotionCompensation
[    12.630] Initializing built-in extension XFree86-VidModeExtension
[    12.630] Initializing built-in extension XFree86-DGA
[    12.630] Initializing built-in extension XFree86-DRI
[    12.630] Initializing built-in extension DRI2
[    12.630] (II) LoadModule: "glx"
[    12.676] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    12.676] (II) Module glx: vendor="X.Org Foundation"
[    12.676]    compiled for 1.14.3.901, module version = 1.0.0
[    12.676]    ABI class: X.Org Server Extension, version 7.0
[    12.676] (==) AIGLX enabled
[    12.676] Loading extension GLX
[    12.676] (II) LoadModule: "nouveau"
[    12.684] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[    12.684] (II) Module nouveau: vendor="X.Org Foundation"
[    12.684]    compiled for 1.14.3, module version = 1.0.9
[    12.684]    Module class: X.Org Video Driver
[    12.684]    ABI class: X.Org Video Driver, version 14.1
[    12.684] (II) NOUVEAU driver 
[    12.684] (II) NOUVEAU driver for NVIDIA chipset families :
[    12.684]    RIVA TNT        (NV04)
[    12.684]    RIVA TNT2       (NV05)
[    12.684]    GeForce 256     (NV10)
[    12.684]    GeForce 2       (NV11, NV15)
[    12.684]    GeForce 4MX     (NV17, NV18)
[    12.684]    GeForce 3       (NV20)
[    12.684]    GeForce 4Ti     (NV25, NV28)
[    12.684]    GeForce FX      (NV3x)
[    12.684]    GeForce 6       (NV4x)
[    12.684]    GeForce 7       (G7x)
[    12.684]    GeForce 8       (G8x)
[    12.684]    GeForce GTX 200 (NVA0)
[    12.684]    GeForce GTX 400 (NVC0)
[    12.684] (++) using VT number 7

[    12.684] (II) [drm] nouveau interface version: 1.1.1
[    12.684] (II) Loading sub module "dri2"
[    12.684] (II) LoadModule: "dri2"
[    12.684] (II) Module "dri2" already built-in
[    12.684] (--) NOUVEAU(0): Chipset: "NVIDIA NVD9"
[    12.684] (II) NOUVEAU(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    12.684] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    12.684] (==) NOUVEAU(0): RGB weight 888
[    12.684] (==) NOUVEAU(0): Default visual is TrueColor
[    12.684] (**) NOUVEAU(0): Option "GLXVBlank" "true"
[    12.684] (==) NOUVEAU(0): Using HW cursor
[    12.684] (**) NOUVEAU(0): GLX sync to VBlank enabled.
[    12.684] (==) NOUVEAU(0): Page flipping enabled
[    12.684] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[    12.720] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[    12.722] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[    12.755] (II) NOUVEAU(0): EDID for output DVI-I-1
[    12.755] (II) NOUVEAU(0): Manufacturer: PHL  Model: c0b1  Serial#: 13660
[    12.755] (II) NOUVEAU(0): Year: 2012  Week: 42
[    12.755] (II) NOUVEAU(0): EDID Version: 1.3
[    12.755] (II) NOUVEAU(0): Digital Display Input
[    12.755] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 48  vert.: 27
[    12.755] (II) NOUVEAU(0): Gamma: 2.20
[    12.755] (II) NOUVEAU(0): DPMS capabilities: Off
[    12.755] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    12.755] (II) NOUVEAU(0): First detailed timing is preferred mode
[    12.755] (II) NOUVEAU(0): redX: 0.635 redY: 0.349   greenX: 0.332 greenY: 0.619
[    12.755] (II) NOUVEAU(0): blueX: 0.155 blueY: 0.055   whiteX: 0.313 whiteY: 0.329
[    12.755] (II) NOUVEAU(0): Supported established timings:
[    12.755] (II) NOUVEAU(0): 720x400@70Hz
[    12.755] (II) NOUVEAU(0): 640x480@60Hz
[    12.755] (II) NOUVEAU(0): 640x480@67Hz
[    12.755] (II) NOUVEAU(0): 640x480@72Hz
[    12.755] (II) NOUVEAU(0): 640x480@75Hz
[    12.755] (II) NOUVEAU(0): 800x600@60Hz
[    12.755] (II) NOUVEAU(0): 800x600@75Hz
[    12.755] (II) NOUVEAU(0): 1024x768@60Hz
[    12.755] (II) NOUVEAU(0): 1024x768@75Hz
[    12.755] (II) NOUVEAU(0): 1280x1024@75Hz
[    12.755] (II) NOUVEAU(0): Manufacturer's mask: 0
[    12.755] (II) NOUVEAU(0): Supported standard timings:
[    12.755] (II) NOUVEAU(0): #0: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    12.755] (II) NOUVEAU(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    12.755] (II) NOUVEAU(0): #2: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[    12.755] (II) NOUVEAU(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    12.755] (II) NOUVEAU(0): #4: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    12.755] (II) NOUVEAU(0): #5: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    12.755] (II) NOUVEAU(0): Supported detailed timing:
[    12.755] (II) NOUVEAU(0): clock: 148.5 MHz   Image Size:  477 x 268 mm
[    12.755] (II) NOUVEAU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    12.755] (II) NOUVEAU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    12.755] (II) NOUVEAU(0): Serial No: AU01242013660
[    12.755] (II) NOUVEAU(0): Monitor name: Philips 226V4
[    12.755] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[    12.755] (II) NOUVEAU(0): EDID (in hex):
[    12.755] (II) NOUVEAU(0):   00ffffffffffff00410cb1c05c350000
[    12.755] (II) NOUVEAU(0):   2a16010380301b782a92c5a259559e27
[    12.755] (II) NOUVEAU(0):   0e5054bd4b00d1c08180950f9500b300
[    12.755] (II) NOUVEAU(0):   81c001010101023a801871382d40582c
[    12.755] (II) NOUVEAU(0):   4500dd0c1100001e000000ff00415530
[    12.755] (II) NOUVEAU(0):   31323432303133363630000000fc0050
[    12.755] (II) NOUVEAU(0):   68696c697073203232365634000000fd
[    12.755] (II) NOUVEAU(0):   00384c1e5311000a20202020202000ae
[    12.755] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[    12.755] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    12.755] (II) NOUVEAU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    12.755] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    12.755] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    12.755] (II) NOUVEAU(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    12.755] (II) NOUVEAU(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    12.755] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.44  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.7 kHz)
[    12.755] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    12.755] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    12.755] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    12.755] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    12.755] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    12.755] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[    12.755] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    12.755] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    12.755] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    12.757] (II) NOUVEAU(0): EDID for output HDMI-1
[    12.757] (II) NOUVEAU(0): Output DVI-I-1 connected
[    12.757] (II) NOUVEAU(0): Output HDMI-1 disconnected
[    12.757] (II) NOUVEAU(0): Using exact sizes for initial modes
[    12.757] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
[    12.757] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    12.757] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[    12.757] (**) NOUVEAU(0):  Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
[    12.757] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    12.757] (**) NOUVEAU(0):  Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
[    12.757] (II) NOUVEAU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    12.757] (**) NOUVEAU(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[    12.757] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    12.757] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[    12.757] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    12.757] (**) NOUVEAU(0):  Driver mode "1440x900": 136.8 MHz (scaled from 0.0 MHz), 70.6 kHz, 75.0 Hz
[    12.757] (II) NOUVEAU(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    12.757] (**) NOUVEAU(0):  Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
[    12.757] (II) NOUVEAU(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    12.757] (**) NOUVEAU(0):  Mode "1280x720": 74.4 MHz (scaled from 0.0 MHz), 44.7 kHz, 60.0 Hz
[    12.757] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.44  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.7 kHz)
[    12.757] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[    12.757] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    12.757] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    12.757] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    12.757] (**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[    12.757] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    12.757] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    12.757] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    12.757] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[    12.757] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    12.757] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[    12.757] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[    12.757] (**) NOUVEAU(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[    12.758] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    12.758] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[    12.758] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    12.758] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[    12.758] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    12.758] (==) NOUVEAU(0): DPI set to (96, 96)
[    12.758] (II) Loading sub module "fb"
[    12.758] (II) LoadModule: "fb"
[    12.758] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    12.758] (II) Module fb: vendor="X.Org Foundation"
[    12.758]    compiled for 1.14.3.901, module version = 1.0.0
[    12.758]    ABI class: X.Org ANSI C Emulation, version 0.4
[    12.758] (II) Loading sub module "exa"
[    12.758] (II) LoadModule: "exa"
[    12.758] (II) Loading /usr/lib64/xorg/modules/libexa.so
[    12.758] (II) Module exa: vendor="X.Org Foundation"
[    12.758]    compiled for 1.14.3.901, module version = 2.6.0
[    12.758]    ABI class: X.Org Video Driver, version 14.1
[    12.758] (II) Loading sub module "shadowfb"
[    12.758] (II) LoadModule: "shadowfb"
[    12.758] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so
[    12.758] (II) Module shadowfb: vendor="X.Org Foundation"
[    12.758]    compiled for 1.14.3.901, module version = 1.0.0
[    12.758]    ABI class: X.Org ANSI C Emulation, version 0.4
[    12.758] (--) Depth 24 pixmap format is 32 bpp
[    12.759] (II) NOUVEAU(0): Opened GPU channel 0
[    12.761] (II) NOUVEAU(0): [DRI2] Setup complete
[    12.761] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    12.761] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[    12.761] (II) EXA(0): Driver allocated offscreen pixmaps
[    12.761] (II) EXA(0): Driver registered support for the following operations:
[    12.761] (II)         Solid
[    12.761] (II)         Copy
[    12.761] (II)         Composite (RENDER acceleration)
[    12.761] (II)         UploadToScreen
[    12.761] (II)         DownloadFromScreen
[    12.761] (==) NOUVEAU(0): Backing store disabled
[    12.761] (==) NOUVEAU(0): Silken mouse enabled
[    12.761] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    12.761] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    12.761] (==) NOUVEAU(0): DPMS enabled
[    12.761] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    12.762] (--) RandR disabled
[    12.775] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    12.776] (II) AIGLX: enabled GLX_INTEL_swap_event
[    12.776] (II) AIGLX: enabled GLX_ARB_create_context
[    12.776] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    12.776] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    12.776] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    12.776] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    12.776] (II) AIGLX: Loaded and initialized nouveau
[    12.776] (II) GLX: Initialized DRI2 GL provider for screen 0
[    12.780] (II) NOUVEAU(0): NVEnterVT is called.
[    12.811] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
[    12.811] resize called 1920 1080
[    12.881] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    12.881] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    12.881] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    12.881] (**) Power Button: Applying InputClass "LocalKeyboard"
[    12.881] (II) LoadModule: "evdev"
[    12.881] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    12.881] (II) Module evdev: vendor="X.Org Foundation"
[    12.881]    compiled for 1.14.3, module version = 2.8.2
[    12.881]    Module class: X.Org XInput Driver
[    12.881]    ABI class: X.Org XInput driver, version 19.1
[    12.881] (II) Using input driver 'evdev' for 'Power Button'
[    12.881] (**) Power Button: always reports core events
[    12.881] (**) evdev: Power Button: Device: "/dev/input/event1"
[    12.881] (--) evdev: Power Button: Vendor 0 Product 0x1
[    12.881] (--) evdev: Power Button: Found keys
[    12.881] (II) evdev: Power Button: Configuring as keyboard
[    12.881] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    12.881] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    12.881] (**) Option "xkb_rules" "evdev"
[    12.881] (**) Option "xkb_model" "pc104"
[    12.881] (**) Option "xkb_layout" "fr"
[    12.881] (**) Option "xkb_options" "caps:capslock"
[    12.895] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    12.895] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    12.895] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    12.895] (**) Power Button: Applying InputClass "LocalKeyboard"
[    12.895] (II) Using input driver 'evdev' for 'Power Button'
[    12.895] (**) Power Button: always reports core events
[    12.895] (**) evdev: Power Button: Device: "/dev/input/event0"
[    12.895] (--) evdev: Power Button: Vendor 0 Product 0x1
[    12.895] (--) evdev: Power Button: Found keys
[    12.895] (II) evdev: Power Button: Configuring as keyboard
[    12.895] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    12.895] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    12.895] (**) Option "xkb_rules" "evdev"
[    12.895] (**) Option "xkb_model" "pc104"
[    12.895] (**) Option "xkb_layout" "fr"
[    12.895] (**) Option "xkb_options" "caps:capslock"
[    12.896] (II) config/udev: Adding drm device (/dev/dri/card0)
[    12.896] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event11)
[    12.896] (II) No input driver specified, ignoring this device.
[    12.896] (II) This device may have been added with another device file.
[    12.896] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
[    12.896] (II) No input driver specified, ignoring this device.
[    12.896] (II) This device may have been added with another device file.
[    12.896] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event2)
[    12.896] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    12.896] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    12.896] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[    12.896] (**) USB Optical Mouse: always reports core events
[    12.896] (**) evdev: USB Optical Mouse: Device: "/dev/input/event2"
[    12.896] (--) evdev: USB Optical Mouse: Vendor 0x461 Product 0x4d0f
[    12.896] (--) evdev: USB Optical Mouse: Found 3 mouse buttons
[    12.896] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[    12.896] (--) evdev: USB Optical Mouse: Found relative axes
[    12.896] (--) evdev: USB Optical Mouse: Found x and y relative axes
[    12.896] (II) evdev: USB Optical Mouse: Configuring as mouse
[    12.896] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[    12.896] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    12.896] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    12.896] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input2/event2"
[    12.896] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 8)
[    12.896] (II) evdev: USB Optical Mouse: initialized for relative axes.
[    12.896] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[    12.896] (**) USB Optical Mouse: (accel) acceleration profile 0
[    12.896] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[    12.896] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[    12.897] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[    12.897] (II) No input driver specified, ignoring this device.
[    12.897] (II) This device may have been added with another device file.
[    12.897] (II) config/udev: Adding input device NOVATEK USB Keyboard (/dev/input/event3)
[    12.897] (**) NOVATEK USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    12.897] (**) NOVATEK USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    12.897] (**) NOVATEK USB Keyboard: Applying InputClass "LocalKeyboard"
[    12.897] (II) Using input driver 'evdev' for 'NOVATEK USB Keyboard'
[    12.897] (**) NOVATEK USB Keyboard: always reports core events
[    12.897] (**) evdev: NOVATEK USB Keyboard: Device: "/dev/input/event3"
[    12.897] (--) evdev: NOVATEK USB Keyboard: Vendor 0x461 Product 0x10
[    12.897] (--) evdev: NOVATEK USB Keyboard: Found keys
[    12.897] (II) evdev: NOVATEK USB Keyboard: Configuring as keyboard
[    12.897] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input3/event3"
[    12.897] (II) XINPUT: Adding extended input device "NOVATEK USB Keyboard" (type: KEYBOARD, id 9)
[    12.897] (**) Option "xkb_rules" "evdev"
[    12.897] (**) Option "xkb_model" "pc104"
[    12.897] (**) Option "xkb_layout" "fr"
[    12.897] (**) Option "xkb_options" "caps:capslock"
[    12.897] (II) config/udev: Adding input device NOVATEK USB Keyboard (/dev/input/event4)
[    12.897] (**) NOVATEK USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    12.897] (**) NOVATEK USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    12.897] (**) NOVATEK USB Keyboard: Applying InputClass "LocalKeyboard"
[    12.897] (II) Using input driver 'evdev' for 'NOVATEK USB Keyboard'
[    12.897] (**) NOVATEK USB Keyboard: always reports core events
[    12.897] (**) evdev: NOVATEK USB Keyboard: Device: "/dev/input/event4"
[    12.897] (--) evdev: NOVATEK USB Keyboard: Vendor 0x461 Product 0x10
[    12.897] (--) evdev: NOVATEK USB Keyboard: Found keys
[    12.897] (II) evdev: NOVATEK USB Keyboard: Configuring as keyboard
[    12.897] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input4/event4"
[    12.897] (II) XINPUT: Adding extended input device "NOVATEK USB Keyboard" (type: KEYBOARD, id 10)
[    12.897] (**) Option "xkb_rules" "evdev"
[    12.897] (**) Option "xkb_model" "pc104"
[    12.897] (**) Option "xkb_layout" "fr"
[    12.897] (**) Option "xkb_options" "caps:capslock"
[    12.897] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event10)
[    12.897] (II) No input driver specified, ignoring this device.
[    12.897] (II) This device may have been added with another device file.
[    12.898] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event6)
[    12.898] (II) No input driver specified, ignoring this device.
[    12.898] (II) This device may have been added with another device file.
[    12.898] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event7)
[    12.898] (II) No input driver specified, ignoring this device.
[    12.898] (II) This device may have been added with another device file.
[    12.898] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
[    12.898] (II) No input driver specified, ignoring this device.
[    12.898] (II) This device may have been added with another device file.
[    12.898] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event9)
[    12.898] (II) No input driver specified, ignoring this device.
[    12.898] (II) This device may have been added with another device file.
[    12.898] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    12.898] (II) No input driver specified, ignoring this device.
[    12.898] (II) This device may have been added with another device file.
[   123.769] (II) NOUVEAU(0): EDID vendor "PHL", prod id 49329
[   123.769] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[   123.769] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[   123.769] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[   123.769] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[   123.769] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   123.769] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   123.769] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   123.769] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   123.769] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   123.769] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   123.769] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   123.769] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   123.769] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   123.769] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   123.769] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[   123.769] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   123.769] (II) NOUVEAU(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[   123.769] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[   123.769] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[   123.769] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[   125.488] (II) NOUVEAU(0): EDID vendor "PHL", prod id 49329
[   125.488] (II) NOUVEAU(0): Using hsync ranges from config file
[   125.488] (II) NOUVEAU(0): Using vrefresh ranges from config file
[   125.488] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[   125.488] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[   125.488] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   125.488] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   125.488] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   125.488] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   125.488] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   125.488] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   125.488] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   125.488] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   125.488] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   125.488] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   125.488] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[   125.488] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   125.488] (II) NOUVEAU(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[   125.488] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[   125.488] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[   125.488] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)

[^] # Re: pilotes

Posté par Flu le 03 novembre 2014 à 15:01. Évalué à 1. Dernière modification le 03 novembre 2014 à 15:01.

voici Egalement les infos matériel du pc:

http://www.noelshack.com/2014-45-1415023238-capture-d-ecran14.jpeg
- [^] # Re: pilotes
  
  Posté par Tanouky le 03 novembre 2014 à 18:44. Évalué à 1.
  
  Essaie avec le driver proprio' (juste essayer) ou un nouveau noyau, ça devrait corriger le problème. :)
  - [^] # Re: pilotes
    
    Posté par Flu le 04 novembre 2014 à 18:09. Évalué à 2. Dernière modification le 04 novembre 2014 à 18:13.
    
    Pas la peine pour le proprio, j'ai trouvé d'ou vient le problème,
    
    j'ai fait cette opération pour luter contre les problème de tearing quand je regarde des videos:
    
    Créer un fichier xorg.conf.d/20-nouveau.conf ( /etc/X11/xorg.conf.d/20-nouveau.conf ) et mettre cela dedans:
    Section "Device" Identifier "nvidia card" Driver "nouveau" Option "GLXVBlank" "true" EndSection
    Source: https://ask.fedoraproject.org/en/question/7503/how-do-i-enable-nouveau-vsync/?answer=29902#post-id-29902
    
    Quand je supprime ce fichier crée, plus de problème à la sortie de veille.
    
    Ça réglé les problème de tearing totalement pour certaine personne, pour moi ça marche que quand je suis en plein écran, mais c'est mieux que rien, j'aimerais garder ce fichier, comment faire ?
    - [^] # Re: pilotes
      
      Posté par Flu le 05 novembre 2014 à 11:53. Évalué à 1.
      
      Le problème est réglé en passant à la 13.2
      
      Merci.

Suivre le flux des commentaires

Note : les commentaires appartiennent à celles et ceux qui les ont postés. Nous n’en sommes pas responsables.