voila maintenant c'est bon, j'ai reussi a recompiler amarok avec le support mysql.
pas de probleme avec le script PHP, a part qu'il ne fonctionne pas sur les autres postes windows de ma maison, car il exporte une liste en .pls.
sans être indiscret, comment exploite-tu ta base de donnée ?
je suis sur mandriva LE2005, j'ai lu aussi cette page, mais je n'ai aucune allusion a la base de donnée mysql dans la configuration d'amarok.
j'ai donc aussi essayé de compiler les sources, je me suis retrouvé confronter avec la LE2005 au probleme des headers KDE, ensuite j'ai eu le problème de "mysql_config" dont il ne trouve pas le chemin. et maintenant j'ai trouvé toutes les librairie manquante.
c'est grâce a vous et votre aide, je reprends le probleme apres reflexion, je ne pouvais pas utiliser les fonctions réseau, son et USB ( 2 ports ) en meme temps sans générer un conflit entre les matériels. En effet, ces fonctions étaient gérées sur la même IRQ. j'ai donc changé de slot PCI ma carte son ( la carte réseau et les port USB étant intégrées ), mais dans ces cas là, je n'avais plus rien du tout, ni réseau ni son. Comme la fait remarquer -=[ Benoit Plessis ]=- dans le poste précédent :
2/ verfiier que le probleme ne vient pas de l'acpi ou de l'apic (important c'est un probleme courant des kernels mandrake et des nforce).
Au final, le problème ne venais pas de ma carte son mais de mon chipset nforce 2.
Merci a vous car si le problème n'étais pas résolus j'aurais changé de carte son...
merci de te soucier de mon cas, et bien oui je suis nouveau, j'utilise ALSA, j'ai télécharger des drivers. Là ou tu vas pouvoir m'aider c'est au niveau du " Make " ou " Make install " car je ne comprends pas coment utiliser cette ligne de commande.
pour finir, j'ai essayer le lecteur Totem, mais sans succès, je vais donc essayer gsteamer, et je revienderais plus tard.
[^] # Re: Mysql dans amaroK
Posté par frozenp . En réponse au message amarok et le support mysql. Évalué à 1.
enfin je pas, on vera bien.
merci quand meme pour toute ces précision.
a+
[^] # Re: Mysql dans amaroK
Posté par frozenp . En réponse au message amarok et le support mysql. Évalué à 1.
Peut-tu éclairer ma lanterne ?
[^] # Re: Mysql dans amaroK
Posté par frozenp . En réponse au message amarok et le support mysql. Évalué à 1.
pas de probleme avec le script PHP, a part qu'il ne fonctionne pas sur les autres postes windows de ma maison, car il exporte une liste en .pls.
sans être indiscret, comment exploite-tu ta base de donnée ?
[^] # Re: Mysql dans amaroK
Posté par frozenp . En réponse au message amarok et le support mysql. Évalué à 1.
je suis sur mandriva LE2005, j'ai lu aussi cette page, mais je n'ai aucune allusion a la base de donnée mysql dans la configuration d'amarok.
j'ai donc aussi essayé de compiler les sources, je me suis retrouvé confronter avec la LE2005 au probleme des headers KDE, ensuite j'ai eu le problème de "mysql_config" dont il ne trouve pas le chemin. et maintenant j'ai trouvé toutes les librairie manquante.
Utilise tu le script PHP de cette : http://www.kde-apps.org/content/show.php?content=25398(...)
cordialement,
[^] # Problemes résolus
Posté par frozenp . En réponse au message Sound Blaster Live 5.1. Évalué à 1.
c'est grâce a vous et votre aide, je reprends le probleme apres reflexion, je ne pouvais pas utiliser les fonctions réseau, son et USB ( 2 ports ) en meme temps sans générer un conflit entre les matériels. En effet, ces fonctions étaient gérées sur la même IRQ. j'ai donc changé de slot PCI ma carte son ( la carte réseau et les port USB étant intégrées ), mais dans ces cas là, je n'avais plus rien du tout, ni réseau ni son. Comme la fait remarquer -=[ Benoit Plessis ]=- dans le poste précédent :
2/ verfiier que le probleme ne vient pas de l'acpi ou de l'apic (important c'est un probleme courant des kernels mandrake et des nforce).
Au final, le problème ne venais pas de ma carte son mais de mon chipset nforce 2.
Merci a vous car si le problème n'étais pas résolus j'aurais changé de carte son...
Merci et a Bientôt
[^] # Re: plusieurs possiblibiltées
Posté par frozenp . En réponse au message Sound Blaster Live 5.1. Évalué à 1.
* Reponse a la ligne de commande lspci -vv tres longue :-) :
00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
Subsystem: nVidia Corporation: Unknown device 0c17
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
Subsystem: Giga-byte Technology: Unknown device 0c11
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <available only to root>
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
Subsystem: Giga-byte Technology: Unknown device 0c11
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at ec00 [size=32]
Capabilities: <available only to root>
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology: Unknown device 5004
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at d8001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology: Unknown device 5004
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 10
Region 0: Memory at d8002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology: Unknown device 5004
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 11
Region 0: Memory at d8003000 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: d7000000-d7ffffff
Prefetchable memory behind bridge: d4000000-d4ffffff
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology: Unknown device 5002
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Region 4: I/O ports at f000 [size=16]
Capabilities: <available only to root>
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normaldecode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
Memory behind bridge: d5000000-d6ffffff
Prefetchable memory behind bridge: c0000000-cfffffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
01:08.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a)
Subsystem: Creative Labs SBLive! 5.1 Digital Model SB0220
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at d000 [size=32]
Capabilities: <available only to root>
01:08.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 0a)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 0: I/O ports at d400 [size=8]
Capabilities: <available only to root>
01:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at d4000000 (32-bit, prefetchable) [size=4K]
Capabilities: <available only to root>
01:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver, audio section)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at d4001000 (32-bit, prefetchable) [size=4K]
Capabilities: <available only to root>
01:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Giga-byte Technology GA-7VM400M/7VT600 Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at d800 [size=256]
Region 1: Memory at d7000000 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
02:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) (prog-if 00 [VGA])
Subsystem: LeadTek Research Inc.: Unknown device 2960
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 19
Region 0: Memory at d5000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Expansion ROM at [disabled] [size=128K]
Capabilities: <available only to root>
ensuite,
* Reponse a la ligne de commande cat /proc/interrupts :
CPU0
0: 438848 IO-APIC-edge timer
1: 562 IO-APIC-edge i8042
2: 0 XT-PIC cascade
8: 1 IO-APIC-edge rtc
9: 0 XT-PIC ohci_hcd, bttv0, bt878
10: 0 IO-APIC-edge ohci_hcd
11: 5236 IO-APIC-edge ehci_hcd, eth0, EMU10K1
12: 40540 IO-APIC-edge i8042
14: 10186 IO-APIC-edge ide0
15: 3807 IO-APIC-edge ide1
NMI: 0
LOC: 438766
ERR: 0
MIS: 0
* Reponse a la ligne de commande dmesg :
Linux version 2.6.11-6mdk (gb@n2.mandrakesoft.com) (gcc version 3.4.3 (Mandrakelinux 10.2 3.4.3-3mdk)) #1 Tue Mar 22 16:04:32 CET 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f5080
On node 0 totalpages: 262128
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32752 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 Nvidia ) @ 0x000f6920
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff7500
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
Built 1 zonelists
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
Kernel command line: BOOT_IMAGE=linux-nonfb ro root=305 acpi=ht resume=/dev/hda9
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2079.463 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1034964k/1048512k available (2295k kernel code, 12928k reserved, 686k data, 264k init, 131008k highmem, 0k BadRAM)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4120.57 BogoMIPS (lpj=2060288)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 0000000000000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 2600+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found pin 0) ...works.
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 217k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfa900, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Disabled
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: nForce2 C1 Halt Disconnect fixup
PCI: Discovered primary peer bus ff [IRQ]
PCI: Using IRQ router default [10de/01e0] at 0000:00:00.0
PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 19
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1122683180.911:0): initialized
highmem bounce pool size: 64 pages
inotify device minor=63
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 6Y250P0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: Host Protected Area detected.
current capacity is 490232639 sectors (250999 MB)
native capacity is 490234752 sectors (251000 MB)
hda: Host Protected Area disabled.
hda: 490234752 sectors (251000 MB) w/7936KiB Cache, CHS=30515/255/63, UDMA(133)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 p10 >
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
devfs_mk_dev: could not append to parent for md/0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 264k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd 0000:00:02.0: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 9, pci mem 0xd8001000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd 0000:00:02.1: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 10, pci mem 0xd8002000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci_hcd 0000:00:02.2: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 11, pci mem 0xd8003000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: park 0
ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
EXT3 FS on hda5, internal journal
Adding 1124508k swap on /dev/hda9. Priority:-1 extents:1
Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:01:0a.0, irq: 9, latency: 32, mmio: 0xd4000000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00fffbff [init]
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes
bttv0: using tuner=33
bttv0: i2c: checking for MSP34xx @ 0x80... found
msp34xx: init: chip=MSP3410G-B11 +nicam +simple +simpler +radio mode=simple
msp3410: daemon started
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tda9885/6/7: chip found @ 0x96
tuner: chip found at addr 0xc0 i2c-bus bt878 #0 [sw]
tuner: type set to 33 (MT20xx universal) by bt878 #0 [sw]
tuner: microtune: companycode=3dbf part=42 rev=2f
tuner: microtune MT2050 found, OK
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
bt878(0): Bt878 (rev 17) at 01:0a.1, irq: 9, latency: 32, memory: 0xd4001000
gameport: pci0000:01:08.1 speed 852 kHz
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: AGP aperture is 64M @ 0xd0000000
Supermount version 2.0.4 for kernel 2.6
ntfs: Ignoring new-style parameters in presence of obsolete ones
NTFS driver 2.1.22 [Flags: R/O DEBUG MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS volume version 3.1.
loop: loaded (max 8 devices)
hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
8139too Fast Ethernet driver 0.9.27
eth0: RealTek RTL8139 at 0xf89ae000, 00:0d:61:11:94:31, IRQ 11
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
ip_conntrack version 2.1 (8191 buckets, 65528 max) - 248 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET: Registered protocol family 17
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (8191 buckets, 65528 max) - 248 bytes per conntrack
snd-mixer-oss: Unknown symbol snd_unregister_oss_device
snd-mixer-oss: Unknown symbol snd_register_oss_device
snd-mixer-oss: Unknown symbol snd_mixer_oss_notify_callback
snd-mixer-oss: Unknown symbol snd_oss_info_register
snd-pcm-oss: Unknown symbol snd_unregister_oss_device
snd-pcm-oss: Unknown symbol snd_register_oss_device
snd-pcm-oss: Unknown symbol snd_mixer_oss_ioctl_card
snd-pcm-oss: Unknown symbol snd_oss_info_register
snd-mixer-oss: Unknown symbol snd_unregister_oss_device
snd-mixer-oss: Unknown symbol snd_register_oss_device
snd-mixer-oss: Unknown symbol snd_mixer_oss_notify_callback
snd-mixer-oss: Unknown symbol snd_oss_info_register
snd-mixer-oss: Unknown symbol snd_unregister_oss_device
snd-mixer-oss: Unknown symbol snd_register_oss_device
snd-mixer-oss: Unknown symbol snd_mixer_oss_notify_callback
snd-mixer-oss: Unknown symbol snd_oss_info_register
snd-pcm-oss: Unknown symbol snd_unregister_oss_device
snd-pcm-oss: Unknown symbol snd_register_oss_device
snd-pcm-oss: Unknown symbol snd_mixer_oss_ioctl_card
snd-pcm-oss: Unknown symbol snd_oss_info_register
snd-seq-oss: Unknown symbol snd_unregister_oss_device
snd-seq-oss: Unknown symbol snd_register_oss_device
snd-seq-oss: Unknown symbol snd_oss_info_register
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03b26e0(lo)
IPv6 over IPv4 tunneling driver
Disabled Privacy Extensions on device f74bc800(sit0)
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.0.2 DST=224.0.0.251 LEN=73TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.0.2 DST=224.0.0.251 LEN=73TOS=0x00 PREC=0x00 TTL=255 ID=1 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.0.2 DST=224.0.0.251 LEN=73TOS=0x00 PREC=0x00 TTL=255 ID=2 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.0.2 DST=224.0.0.251 LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=3 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.0.2 DST=224.0.0.251 LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=4 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.0.2 DST=224.0.0.251 LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=5 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.0.2 DST=224.0.0.251 LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=6 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85
eth0: no IPv6 routers present
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.0.2 DST=224.0.0.251 LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.0.2 DST=224.0.0.251 LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.0.2 DST=224.0.0.251 LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85
Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.0.2 DST=224.0.0.251 LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=10 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85
PS : dans le fond, tu me dira si toute la reponse est nécéssaire, mais je suis débutant donc je ne sais pas :)
A part ca, je suis connecter a internet via une passerelle residentiel dont tu apercevera peut etre la configuration dans les résultats précédent.
Merci d'avance de ton aide,
[^] # Re: plusieurs possiblibiltées
Posté par frozenp . En réponse au message Sound Blaster Live 5.1. Évalué à 1.
pour finir, j'ai essayer le lecteur Totem, mais sans succès, je vais donc essayer gsteamer, et je revienderais plus tard.
merci beaucoup.