Je suis passé par le CD d'install en mode rescue, puis après montage de des disques je suis passé en mode texte. J'ai pu mettre le bon fichier de config tout marche donc.
Je vous remercie tous beaucoup.
J'ai modifié les modelines dans mon fichier Xconfig en faisant une copie de sauvegarde. En redémarrant, les paramètres qu'on m'a conseillé de mettre sont pourris, quand linux se charge et que l'écran switch dans la configuration des modelines, les paramètres ne lui conviennent pas.
J'ai essayé de le redémarrer, de faire ctrl + alt+F1, rien ne se passe j'ai toujours un écran noir.
Je pense que le seul moyen de m'en sortir et de passer en lilo mode texte de taper linux 3 pour démarrer en mode texte et remplacer mon fichier de config par mon ancien que j'ai mis de côté. Mais je ne sais pas comment faire pour passer en lilo mode texte.
Si vous avez d'autre idées je suis preneur, merci encore!
Excuse moi de n'être pas très clair.
j'aimerai bien modifier ce fichier mais comment y accéder dès que je boot sur linux mon écran s'éteint.
Merci pour ton aide
J'ai essayé un générique 1600*1200 à 76Hz, çà ne marche pas mieux, et plug and play dis qu'il n'arrive pas à le configurer. JE suis un peu dégouté en 9.2 je n'avais pas ce problème. Je continue à chercher. Encore merci pour ton aide.
Y'a surement un lien avec l'écran, je vais essayer de changer de type d'écran, je ne l'ai pas trouvé dans la liste. J'ai un mitsubishi Diamond Pro 930SB, mais je ne sais pas quel écran choisir dans la liste?
J'ai mis en commentaire la ligne que tu m'as indiqué, mais çà n'a rien changé. Quel devait être le résultat?
A quoi sert cette ligne ?
Merci quand même pour ton aide.
# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
Section "ServerFlags"
#DontZap # disable (server abort)
#DontZoom # disable <KP_+>/<KP_-> (resolution switching)
AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work
EndSection
Section "Module"
Load "dbe" # Double-Buffering Extension
Load "glx"
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "/usr/X11R6/lib/modules/extensions/libglx.so"
EndSection
# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
Section "ServerFlags"
#DontZap # disable (server abort)
#DontZoom # disable <KP_+>/<KP_-> (resolution switching)
AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work
EndSection
Section "Module"
Load "dbe" # Double-Buffering Extension
Load "glx"
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "/usr/X11R6/lib/modules/extensions/libglx.so"
EndSection
[^] # Re: Heu ...
Posté par levelu . En réponse au message Comment démarrer en mode texte?. Évalué à 0.
Je vous remercie tous beaucoup.
[^] # Re: Heu ...
Posté par levelu . En réponse au message Comment démarrer en mode texte?. Évalué à 0.
J'ai essayé de le redémarrer, de faire ctrl + alt+F1, rien ne se passe j'ai toujours un écran noir.
Je pense que le seul moyen de m'en sortir et de passer en lilo mode texte de taper linux 3 pour démarrer en mode texte et remplacer mon fichier de config par mon ancien que j'ai mis de côté. Mais je ne sais pas comment faire pour passer en lilo mode texte.
Si vous avez d'autre idées je suis preneur, merci encore!
[^] # Re: Heu ...
Posté par levelu . En réponse au message Comment démarrer en mode texte?. Évalué à 0.
j'aimerai bien modifier ce fichier mais comment y accéder dès que je boot sur linux mon écran s'éteint.
Merci pour ton aide
[^] # Re: XF86Config-4
Posté par levelu . En réponse au message Ecran noir sur Mandrake 10.0 officiel avec Geforce4 ti 4200. Évalué à 0.
[^] # Re: XF86Config-4
Posté par levelu . En réponse au message Ecran noir sur Mandrake 10.0 officiel avec Geforce4 ti 4200. Évalué à 1.
[^] # Re: XF86Config-4
Posté par levelu . En réponse au message Ecran noir sur Mandrake 10.0 officiel avec Geforce4 ti 4200. Évalué à 0.
A quoi sert cette ligne ?
Merci quand même pour ton aide.
[^] # Re: XF86Config-4
Posté par levelu . En réponse au message Ecran noir sur Mandrake 10.0 officiel avec Geforce4 ti 4200. Évalué à 1.
En cemoment je suis en 1600X1200 à 75Hz
# Ecran noir sur Mandrake 10.0 officiel avec Geforce4 ti 4200
Posté par levelu . En réponse au message Ecran noir sur Mandrake 10.0 officiel avec Geforce4 ti 4200. Évalué à 0.
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
Section "ServerFlags"
#DontZap # disable (server abort)
#DontZoom # disable <KP_+>/<KP_-> (resolution switching)
AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work
EndSection
Section "Module"
Load "dbe" # Double-Buffering Extension
Load "glx"
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "/usr/X11R6/lib/modules/extensions/libglx.so"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" ""
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "monitor1"
VendorName "Mitsubishi"
ModelName "Mitsubishi Diamond Pro 900u (NFJ9905)"
HorizSync 30.0-95.0
VertRefresh 50.0-152.0
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
Section "Device"
Identifier "device1"
VendorName "NVidia"
BoardName "NVIDIA GeForce4 (generic)"
Driver "nvidia"
Option "DPMS"
Option "IgnoreEDID" "1"
EndSection
Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Virtual 1600 1200
EndSubsection
Subsection "Display"
Depth 15
Virtual 1600 1200
EndSubsection
Subsection "Display"
Depth 16
Virtual 1600 1200
EndSubsection
Subsection "Display"
Depth 24
Virtual 1600 1200
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"
EndSection
[^] # Re: XF86Config-4
Posté par levelu . En réponse au message Ecran noir sur Mandrake 10.0 officiel avec Geforce4 ti 4200. Évalué à 1.
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
Section "ServerFlags"
#DontZap # disable (server abort)
#DontZoom # disable <KP_+>/<KP_-> (resolution switching)
AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work
EndSection
Section "Module"
Load "dbe" # Double-Buffering Extension
Load "glx"
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "/usr/X11R6/lib/modules/extensions/libglx.so"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" ""
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "monitor1"
VendorName "Mitsubishi"
ModelName "Mitsubishi Diamond Pro 900u (NFJ9905)"
HorizSync 30.0-95.0
VertRefresh 50.0-152.0
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
Section "Device"
Identifier "device1"
VendorName "NVidia"
BoardName "NVIDIA GeForce4 (generic)"
Driver "nvidia"
Option "DPMS"
Option "IgnoreEDID" "1"
EndSection
Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Virtual 1600 1200
EndSubsection
Subsection "Display"
Depth 15
Virtual 1600 1200
EndSubsection
Subsection "Display"
Depth 16
Virtual 1600 1200
EndSubsection
Subsection "Display"
Depth 24
Virtual 1600 1200
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"
EndSection