NicKy_pouet a écrit 1 commentaire

  • [^] # Re: adsl max ?

    Posté par  . En réponse au message sagem avec cegetel. Évalué à 1.

    rha je deviens fou, cegetel max mandrake 10.2 sagem 800 et c'est la galère :

    Diagnostic (1.22 2005/03/20) driver eagle-usb 20050525000328
    # System Information
    Linux localhost 2.6.11-6mdk #1 Tue Mar 22 16:04:32 CET 2005 i686 AMD Athlon(tm) 64 Processor 3200+ unknown GNU/Linux
    Mandrakelinux release 10.2 (Limited Edition 2005) for i586
    Linux version 2.6.11-6mdk (gb@n2.mandrakesoft.com) (gcc version 3.4.3 (Mandrakelinux 10.2 3.4.3-3mdk)) #1 Tue Mar 22 16:04:32 CET 2005
    gcc version 3.4.3 (Mandrakelinux 10.2 3.4.3-7mdk)
    # Dependances
    le paquetage kernel-source n'est pas installé
    kernel-source-2.6-2.6.11-6mdk
    ppp-2.4.3-4mdk
    dhcp-client-3.0.2-1mdk
    le paquetage dhcpcd n'est pas installé
    lrwxrwxrwx 1 root root 17 mai 24 22:34 linux -> linux-2.6.11-6mdk
    drwxr-xr-x 21 root root 4096 mai 24 22:34 linux-2.6.11-6mdk
    Warning : available gcc and the version used to compile the kernel differ
    Advice : that's a standard problem on debian, revert to gcc version used for kernel
    # Kernel config : usb modules
    eagle-usb 123264 0
    ppp_async 9088 3
    ppp_generic 24692 13 ppp_async
    slhc 6176 1 ppp_generic
    crc-ccitt 1664 1 ppp_async
    syncppp 14272 1 hdlc
    ehci-hcd 28648 0
    uhci-hcd 28944 0
    usbcore 106008 4 eagle-usb,ehci-hcd,uhci-hcd
    # module loaded ? [ OK ]
    # modem operational ? [ OK ]
    eagle-usb status display
    -------------------------------------------------------------
    Driver version 2.3.0 Chipset: Eagle2
    Vendor ID : 0x1110 Product ID : 0x9021 Rev: 0x500b
    USB Bus : 002 USB Device : 006 Dbg mask: 0x0
    Ethernet Interface : eth1
    MAC: 00:60:4c:49:12:4d
    Tx Rate 608 Rx Rate 7296
    FEC 0 Margin 17 Atten 4 dB
    VID-CPE 0 VID-CO 28 HEC 0
    VPI 8 VCI 35 Delin GOOD
    Cells Tx 125 Cells Rx 144
    Pkts Tx 106 Pkts Rx 99
    OAM 0 Bad VPI 0 Bad CRC 0
    Oversiz. 0

    Modem is operational

    # Config vpi/vci/encapsulation/isp : 8 23 6 (pppoa) FR10
    # pppd launched ? [ OK ]
    # Service for connection [ OK ]
    # ping IP ? [ KO ]
    # test DNS resolution ? [ KO ]

    synchro ok, mais impossible de pinguer :(