Forum Linux.redhat MacBook MAO sous Centos : Pas de son

Posté par  (site web personnel) .
Étiquettes : aucune
0
16
sept.
2009
Salut la communauté

Je poste sur ce forum en espérant ne pas me tromper.
CentOs c'est une REDHAT ;-))

Petite présentation pour mon premier post sur le forum :

Je m'appelle Yann, je suis [http://fr.wikipedia.org/wiki/Tice]Tice dans l'éducation plus exactement au [http://www.clg-anglade-lezignancorbieres.ac-montpellier.fr]collège joseph-anglade à Lézignan-Corbières.

Je me tourne vers vous car mes chers professeurs de musique ont fait l'acquisition de MACBOOK il y a une semaine. (caractéristiques [http://fr.wikipedia.org/wiki/Macbook ] voir modèle mid 2009 dans le tableau en bas de page)

Malgré mon insistance pour acquérir des PC 100% compatible avec le but final -> faire de la MAO avec PLANET CCRMA sous Fedora, ils se sont bornés à vouloir du MAC.
Bilan maintenant c'est moi qui suis dans la M _ _ _ _

J'ai terminé l'install des 3 OS (MAc OS X, XP, CentOS 5.3)

Maintenant je me casse la tête sur la config de la centOs 5.3.

[b]En effet je n'ai pas de SON[/b]

Avouer que c'est embêtant pour une machine dédiée à la MAO


La commande : __system-config-souncard__ me donne ceci :

Caractéritiques :

Vendeur : Nvidia
Modèle : Corporation MCP79-1 High Definition Audio
Module : snd-hda-intel

Système sonore alsa :

Paquet alsa lib : alsa-lib-10.17-1.el5
Paquet alsa utils : alsa-lib-10.17-1.el5


Quelqu'un sait si ce matériel Nvidia MCP79-1 est compatible avec CentOS 5.3 ?

Que dois-je faire pour avoir du SON SVP
J'ai biensûr vérifier que le son n'était pas sur "muet", j'ai essayer d'installer le driver alsa 1.0.21.......

J'attends vos conseils merci par avance

  • # Plus d'infos

    Posté par  . Évalué à 2.

    Peux-tu filer un peu plus d'infos STP ? (si ton chip est un compatible hda-intel, il ne devrait pas y avoir de problème)
    D'abord, ça veut dire quoi exactement "je n'ai pas son" ? Quel logiciel utilises-tu pour lire ton fichier ? Et quel genre de fichier ?
    Des infos plus techniques aussi, genre le résultat d'un lsmod, d'un dmesg. Et aussi quel mixers apparaissent dans les réglages du son, s'ils ne sont pas "muté", etc.

  • # MacBook MAO sous Centos : Pas de son

    Posté par  (site web personnel) . Évalué à 2.

    Pour les autres Macbook il y a des quirks pour faire en sorte que ça marche. Si le matériel est récent il se peut que ce ne soit pas encore intégré.

    Fait une recherche sur les mailing liste de dev d'alsa avec l'ID PCI du chipset et tout.

    Je ne connais pas Linux mais lors de mes recherches pour faire avoir du son sur mon Macbook pro j'avais trouvé :

    http://www.alsa-project.org/main/index.php/Help_To_Debug_Int(...)

    (Ils mentionnent un outil HDA-Analyzer et un autre outil http://helllabs.org/codecgraph)

    Honnêtement j'en avais chié... Quel bonheur quand le son sort enfin :)

    Bonne chance.

    les pixels au peuple !

  • # une autre piste ?

    Posté par  (site web personnel) . Évalué à 1.

    J'ai aussi un mac et j'ai aussi eu des problemes concernant le son. En effet ceux-ci etaient tres faibles voire inaudible.
    Pour corriger le soucis (apres avoir ecumer la moitie d'internet) j'ai finalement reussi a trouver la solution qui va bien.
    Celle-ci consistait a charger le driver en passant une option du type :
    modprobe snd-hda-intel model=mbp3
    Ou bien en ajoutant la ligne suivante (sous debian-like) dans le fichier /etc/modprobe.d/options :
    options snd_hda_intel model=mbp3

    Je ne sais pas si ca va aider mais dans le doute...

    Sinon la sortie de lspci -n peut etre utile.
    Le resultat copie sur le formulaire present sur http://kmuto.jp/debian/hcl/ peut aussi aider.

    • [^] # Re: une autre piste ?

      Posté par  (site web personnel) . Évalué à 1.

      Salut et merci à tous pour vos conseils que je vais tester dans la journée après avoir créer une image du MAC ;-) On est jamais assez prudent !

      Logiciel utilisé : Muse et tout autre issus de PLANET CCRMA, pour lire un fichier m4a (MPEG-4 Audio) avec TOTEM.
      Lire un fichier audio avec Noatun.

      Mixer utilisé : KMIX

      Voici le résultat de la commande DMESG :


      Linux version 2.6.18-164.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Thu Sep 3 03:28:30 EDT 2009
      Command line: ro root=LABEL=/1 acpi=off rhgb quiet
      BIOS-provided physical RAM map:
      BIOS-e820: 0000000000010000 - 000000000009fc00 (usable)
      BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
      BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
      BIOS-e820: 0000000000100000 - 0000000080000000 (usable)
      BIOS-e820: 0000000080000000 - 0000000090000000 (reserved)
      BIOS-e820: 0000000090000000 - 00000000be830000 (usable)
      BIOS-e820: 00000000be830000 - 00000000be834000 (ACPI NVS)
      BIOS-e820: 00000000be834000 - 00000000be84f000 (ACPI data)
      BIOS-e820: 00000000be84f000 - 00000000bea50000 (ACPI NVS)
      BIOS-e820: 00000000bea50000 - 00000000bfec6000 (ACPI data)
      BIOS-e820: 00000000bfec6000 - 00000000bfec8000 (ACPI NVS)
      BIOS-e820: 00000000bfec8000 - 00000000bfec9000 (ACPI data)
      BIOS-e820: 00000000bfec9000 - 00000000bfecb000 (ACPI NVS)
      BIOS-e820: 00000000bfecb000 - 00000000bfecd000 (ACPI data)
      BIOS-e820: 00000000bfecd000 - 00000000bfedf000 (ACPI NVS)
      BIOS-e820: 00000000bfedf000 - 00000000bfef9000 (ACPI data)
      BIOS-e820: 00000000bfef9000 - 00000000bfeff000 (reserved)
      BIOS-e820: 00000000bfeff000 - 00000000bff00000 (ACPI data)
      BIOS-e820: 00000000d3400000 - 00000000d3401000 (reserved)
      BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
      BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
      BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
      BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
      BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
      DMI 2.4 present.
      No NUMA configuration found
      Faking a node at 0000000000000000-0000000140000000
      Bootmem setup node 0 0000000000000000-0000000140000000
      No mptable found.
      Memory for crash kernel (0x0 to 0x0) notwithin permissible range
      disabling kdump
      On node 0 totalpages: 957625
      DMA zone: 2641 pages, LIFO batch:0
      DMA32 zone: 696424 pages, LIFO batch:31
      Normal zone: 258560 pages, LIFO batch:31
      Nvidia board detected. Ignoring ACPI timer override.
      Nosave address range: 000000000009f000 - 00000000000a0000
      Nosave address range: 00000000000a0000 - 00000000000e0000
      Nosave address range: 00000000000e0000 - 0000000000100000
      Nosave address range: 0000000080000000 - 0000000090000000
      Nosave address range: 00000000be830000 - 00000000be834000
      Nosave address range: 00000000be834000 - 00000000be84f000
      Nosave address range: 00000000be84f000 - 00000000bea50000
      Nosave address range: 00000000bea50000 - 00000000bfec6000
      Nosave address range: 00000000bfec6000 - 00000000bfec8000
      Nosave address range: 00000000bfec8000 - 00000000bfec9000
      Nosave address range: 00000000bfec9000 - 00000000bfecb000
      Nosave address range: 00000000bfecb000 - 00000000bfecd000
      Nosave address range: 00000000bfecd000 - 00000000bfedf000
      Nosave address range: 00000000bfedf000 - 00000000bfef9000
      Nosave address range: 00000000bfef9000 - 00000000bfeff000
      Nosave address range: 00000000bfeff000 - 00000000bff00000
      Nosave address range: 00000000bff00000 - 00000000d3400000
      Nosave address range: 00000000d3400000 - 00000000d3401000
      Nosave address range: 00000000d3401000 - 00000000f0000000
      Nosave address range: 00000000f0000000 - 00000000f4000000
      Nosave address range: 00000000f4000000 - 00000000fec00000
      Nosave address range: 00000000fec00000 - 00000000fec01000
      Nosave address range: 00000000fec01000 - 00000000fee00000
      Nosave address range: 00000000fee00000 - 00000000fee01000
      Nosave address range: 00000000fee01000 - 00000000ffc00000
      Nosave address range: 00000000ffc00000 - 0000000100000000
      Allocating PCI resources starting at d4000000 (gap: d3401000:1cbff000)
      SMP: Allowing 0 CPUs, 0 hotplug CPUs
      Built 1 zonelists. Total pages: 957625
      Kernel command line: ro root=LABEL=/1 acpi=off rhgb quiet
      Initializing CPU#0
      PID hash table entries: 4096 (order: 12, 32768 bytes)
      Console: colour VGA+ 80x25
      Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
      Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
      Checking aperture...
      ACPI: DMAR not present
      PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
      Placing software IO TLB between 0x1623000 - 0x5623000
      Memory: 3755384k/5242880k available (2547k kernel code, 151940k reserved, 1289k data, 208k init)
      Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.02 BogoMIPS (lpj=2128012)
      Security Framework v1.0.0 initialized
      SELinux: Initializing.
      SELinux: Starting in permissive mode
      selinux_register_security: Registering secondary module capability
      Capability LSM initialized as secondary
      Mount-cache hash table entries: 256
      CPU: L1 I cache: 32K, L1 D cache: 32K
      CPU: L2 cache: 3072K
      using mwait in idle threads.
      CPU: Physical Processor ID: 0
      CPU: Processor Core ID: 0
      CPU0: Thermal monitoring enabled (TM2)
      SMP alternatives: switching to UP code
      Freeing SMP alternatives: 32k freed
      weird, boot CPU (#0) not listed by the BIOS.
      SMP motherboard not detected.
      Using local APIC timer interrupts.
      result 16625087
      Detected 16.625 MHz APIC timer.
      testing NMI watchdog ... OK.
      SMP disabled
      Brought up 1 CPUs
      testing NMI watchdog ... OK.
      time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer.
      time.c: Detected 2128.012 MHz processor.
      sizeof(vma)=176 bytes
      sizeof(page)=56 bytes
      sizeof(inode)=560 bytes
      sizeof(dentry)=216 bytes
      sizeof(ext3inode)=760 bytes
      sizeof(buffer_head)=96 bytes
      sizeof(skbuff)=248 bytes
      checking if image is initramfs... it is
      Freeing initrd memory: 2558k freed
      NET: Registered protocol family 16
      PCI: Using configuration type 1
      ACPI: Interpreter disabled.
      Linux Plug and Play Support v0.97 (c) Adam Belay
      pnp: PnP ACPI: disabled
      usbcore: registered new driver usbfs
      usbcore: registered new driver hub
      PCI: Probing PCI hardware
      PCI: Probing PCI hardware (bus 00)
      PCI: Transparent bridge - 0000:00:09.0
      PCI: Discovered primary peer bus ff [IRQ]
      PCI: Using IRQ router default [10de/0aa4] at 0000:00:03.1
      PCI: Cannot allocate resource region 0 of device 0000:00:03.5
      NetLabel: Initializing
      NetLabel: domain hash size = 128
      NetLabel: protocols = UNLABELED CIPSOv4
      NetLabel: unlabeled traffic allowed by default
      ACPI: DMAR not present
      PCI-GART: No AMD northbridge found.
      PCI: Bridge: 0000:00:09.0
      IO window: disabled.
      MEM window: d3300000-d33fffff
      PREFETCH window: disabled.
      PCI: Bridge: 0000:00:10.0
      IO window: 1000-1fff
      MEM window: d2000000-d30fffff
      PREFETCH window 0x00000000c0000000-0x00000000d1ffffff
      PCI: Bridge: 0000:00:15.0
      IO window: disabled.
      MEM window: d3200000-d32fffff
      PREFETCH window: disabled.
      PCI: Bridge: 0000:00:16.0
      IO window: disabled.
      MEM window: d3100000-d31fffff
      PREFETCH window: disabled.
      PCI: Enabling device 0000:00:09.0 (0000 -> 0002)
      PCI: Setting latency timer of device 0000:00:09.0 to 64
      PCI: Setting latency timer of device 0000:00:10.0 to 64
      PCI: No IRQ known for interrupt pin A of device 0000:00:15.0. Please try using pci=biosirq.
      PCI: Setting latency timer of device 0000:00:15.0 to 64
      PCI: No IRQ known for interrupt pin A of device 0000:00:16.0. Please try using pci=biosirq.
      PCI: Setting latency timer of device 0000:00:16.0 to 64
      NET: Registered protocol family 2
      IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
      TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
      TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
      TCP: Hash tables configured (established 262144 bind 65536)
      TCP reno registered
      audit: initializing netlink socket (disabled)
      type=2000 audit(1253164362.435:1): initialized
      Total HugeTLB memory allocated, 0
      VFS: Disk quotas dquot_6.5.1
      Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
      SELinux: Registering netfilter hooks
      Initializing Cryptographic API
      alg: No test for crc32c (crc32c-generic)
      ksign: Installing public key data
      Loading keyring
      - Added public key 57F09578A977B70E
      - User ID: CentOS (Kernel Module GPG key)
      io scheduler noop registered
      io scheduler anticipatory registered
      io scheduler deadline registered
      io scheduler cfq registered (default)
      Boot video device is 0000:02:00.0
      PCI: No IRQ known for interrupt pin A of device 0000:00:15.0. Please try using pci=biosirq.
      PCI: Setting latency timer of device 0000:00:15.0 to 64
      pcie_portdrv_probe->Dev[0ac6:10de] has invalid IRQ. Check vendor BIOS
      assign_interrupt_mode Found MSI capability
      Allocate Port Service[0000:00:15.0:pcie00]
      PCI: No IRQ known for interrupt pin A of device 0000:00:16.0. Please try using pci=biosirq.
      PCI: Setting latency timer of device 0000:00:16.0 to 64
      pcie_portdrv_probe->Dev[0ac7:10de] has invalid IRQ. Check vendor BIOS
      assign_interrupt_mode Found MSI capability
      Allocate Port Service[0000:00:16.0:pcie00]
      pci_hotplug: PCI Hot Plug PCI Core version: 0.5
      Real Time Clock Driver v1.12ac
      Non-volatile memory driver v1.2
      Linux agpgart interface v0.101 (c) Dave Jones
      Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
      brd: module loaded
      Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
      ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
      Probing IDE interface ide0...
      Probing IDE interface ide1...
      ide-floppy driver 0.99.newide
      usbcore: registered new driver hiddev
      usbcore: registered new driver usbhid
      drivers/usb/input/hid-core.c: v2.6:USB HID core driver
      PNP: No PS/2 controller found. Probing ports directly.
      i8042.c: No controller found.
      mice: PS/2 mouse device common for all mice
      md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
      md: bitmap version 4.39
      TCP bic registered
      Initializing IPsec netlink socket
      NET: Registered protocol family 1
      NET: Registered protocol family 17
      Initalizing network drop monitor service
      Freeing unused kernel memory: 208k freed
      Write protecting the kernel read-only data: 496k
      PCI: Setting latency timer of device 0000:00:04.1 to 64
      ehci_hcd 0000:00:04.1: EHCI Host Controller
      ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
      ehci_hcd 0000:00:04.1: debug port 1
      PCI: cache line size of 32 is not supported by device 0000:00:04.1
      ehci_hcd 0000:00:04.1: irq 10, io mem 0xd3489200
      ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
      usb usb1: configuration #1 chosen from 1 choice
      hub 1-0:1.0: USB hub found
      hub 1-0:1.0: 7 ports detected
      PCI: Setting latency timer of device 0000:00:06.1 to 64
      ehci_hcd 0000:00:06.1: EHCI Host Controller
      ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
      ehci_hcd 0000:00:06.1: debug port 1
      PCI: cache line size of 32 is not supported by device 0000:00:06.1
      ehci_hcd 0000:00:06.1: irq 5, io mem 0xd3489100
      ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
      usb usb2: configuration #1 chosen from 1 choice
      hub 2-0:1.0: USB hub found
      hub 2-0:1.0: 5 ports detected
      ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
      PCI: Setting latency timer of device 0000:00:04.0 to 64
      ohci_hcd 0000:00:04.0: OHCI Host Controller
      ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
      ohci_hcd 0000:00:04.0: irq 11, io mem 0xd3488000
      usb usb3: configuration #1 chosen from 1 choice
      hub 3-0:1.0: USB hub found
      hub 3-0:1.0: 7 ports detected
      usb 1-4: new high speed USB device using ehci_hcd and address 2
      PCI: Setting latency timer of device 0000:00:06.0 to 64
      ohci_hcd 0000:00:06.0: OHCI Host Controller
      ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
      ohci_hcd 0000:00:06.0: irq 7, io mem 0xd3487000
      usb usb4: configuration #1 chosen from 1 choice
      hub 4-0:1.0: USB hub found
      hub 4-0:1.0: 5 ports detected
      usb 1-4: configuration #1 chosen from 1 choice
      USB Universal Host Controller Interface driver v3.0
      SCSI subsystem initialized
      libata version 3.00 loaded.
      ahci 0000:00:0b.0: version 3.0
      usb 3-5: new low speed USB device using ohci_hcd and address 2
      usb 3-5: configuration #1 chosen from 1 choice
      input: Apple Computer, Inc. IR Receiver as /class/input/input0
      input: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:04.0-5
      usb 3-6: new full speed USB device using ohci_hcd and address 3
      ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl IDE mode
      ahci 0000:00:0b.0: flags: 64bit ncq sntf pm led pmp pio slum part
      PCI: Setting latency timer of device 0000:00:0b.0 to 64
      scsi0 : ahci
      scsi1 : ahci
      scsi2 : ahci
      scsi3 : ahci
      scsi4 : ahci
      scsi5 : ahci
      ata1: SATA max UDMA/133 abar m8192@0xd3484000 port 0xd3484100 irq 81
      ata2: SATA max UDMA/133 abar m8192@0xd3484000 port 0xd3484180 irq 81
      ata3: DUMMY
      ata4: DUMMY
      ata5: DUMMY
      ata6: DUMMY
      usb 3-6: configuration #1 chosen from 1 choice
      input: Apple Inc. Apple Internal Keyboard / Trackpad as /class/input/input1
      input: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6
      input: Apple Inc. Apple Internal Keyboard / Trackpad as /class/input/input2
      input: USB HID v1.11 Mouse [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6
      input: Apple Inc. Apple Internal Keyboard / Trackpad as /class/input/input3
      input: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6
      ohci_hcd 0000:00:06.0: wakeup
      usb 4-1: new full speed USB device using ohci_hcd and address 2
      ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
      ata1.00: ATA-8: FUJITSU MHZ2160BH FFS G1, 00810091, max UDMA/100
      ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
      ata1.00: configured for UDMA/100
      usb 4-1: configuration #1 chosen from 1 choice
      hub 4-1:1.0: USB hub found
      hub 4-1:1.0: 3 ports detected
      usb 4-1.1: new full speed USB device using ohci_hcd and address 3
      ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
      ata2.00: ATAPI: HL-DT-ST DVDRW GS22N, CP06, max UDMA/133, ATAPI AN
      ata2.00: configured for UDMA/133
      Vendor: ATA Model: FUJITSU MHZ2160B Rev: 0081
      Type: Direct-Access ANSI SCSI revision: 05
      SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
      sda: Write Protect is off
      sda: Mode Sense: 00 3a 00 00
      SCSI device sda: drive cache: write back
      SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
      sda: Write Protect is off
      sda: Mode Sense: 00 3a 00 00
      SCSI device sda: drive cache: write back
      sda:<6>usb 4-1.1: configuration #1 chosen from 1 choice
      usb 4-1.2: new full speed USB device using ohci_hcd and address 4
      usb 4-1.2: configuration #1 chosen from 1 choice
      input: HID 05ac:820a as /class/input/input4
      input: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:06.0-1.2
      sda1 sda2 sda3 sda4 sda5
      sd 0:0:0:0: Attached scsi disk sda
      Vendor: HL-DT-ST Model: DVDRW GS22N Rev: CP06
      Type: CD-ROM ANSI SCSI revision: 05
      device-mapper: uevent: version 1.0.3
      device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
      device-mapper: dm-raid45: initialized v0.2594l
      usb 4-1.3: new full speed USB device using ohci_hcd and address 5
      usb 4-1.3: configuration #1 chosen from 1 choice
      input: HID 05ac:820b as /class/input/input5
      input: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:06.0-1.3
      kjournald starting. Commit interval 5 seconds
      EXT3-fs: mounted filesystem with ordered data mode.
      security: 3 users, 6 roles, 1914 types, 234 bools, 1 sens, 1024 cats
      security: 61 classes, 69080 rules
      SELinux: Completing initialization.
      SELinux: Setting up existing superblocks.
      SELinux: initialized (dev sda3, type ext3), uses xattr
      SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
      SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
      SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
      SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
      SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
      SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
      SELinux: initialized (dev devpts, type devpts), uses transition SIDs
      SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
      SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
      SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
      SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
      SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
      SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
      SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
      SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
      SELinux: initialized (dev proc, type proc), uses genfs_contexts
      SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
      SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
      SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
      type=1403 audit(1253164390.367:2): policy loaded auid=4294967295 ses=4294967295
      Bluetooth: Core ver 2.10
      NET: Registered protocol family 31
      Bluetooth: HCI device and connection manager initialized
      Bluetooth: HCI socket layer initialized
      Bluetooth: HCI USB driver ver 2.9
      usbcore: registered new driver hci_usb
      input: PC Speaker as /class/input/input6
      forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.62-Driver Package V1.25.
      PCI: Setting latency timer of device 0000:00:0a.0 to 64
      forcedeth: using HIGHDMA
      eth0: forcedeth.c: subsystem: 010de:cb79 bound to 0000:00:0a.0
      PCI: Setting latency timer of device 0000:00:08.0 to 64
      hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
      input: HDA Digital PCBeep as /class/input/input7
      sd 0:0:0:0: Attached scsi generic sg0 type 0
      scsi 1:0:0:0: Attached scsi generic sg1 type 5
      shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
      sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
      Uniform CD-ROM driver Revision: 3.20
      sr 1:0:0:0: Attached scsi CD-ROM sr0
      floppy0: no floppy controllers found
      lp: driver loaded but no devices found
      SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
      NET: Registered protocol family 10
      lo: Disabled Privacy Extensions
      IPv6 over IPv4 tunneling driver
      md: Autodetecting RAID arrays.
      md: autorun ...
      md: ... autorun DONE.
      device-mapper: multipath: version 1.0.5 loaded
      EXT3 FS on sda3, internal journal
      SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
      Adding 2229220k swap on /dev/sda5. Priority:-1 extents:1 across:2229220k
      SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
      IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
      ip6_tables: (C) 2000-2006 Netfilter Core Team
      ip_tables: (C) 2000-2006 Netfilter Core Team
      Netfilter messages via NETLINK v0.30.
      ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
      ADDRCONF(NETDEV_UP): eth1: link is not ready
      SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
      Bluetooth: L2CAP ver 2.8
      Bluetooth: L2CAP socket layer initialized
      Bluetooth: HIDP (Human Interface Emulation) ver 1.1
      i2c /dev entries driver
      SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
      SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
      SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
      ADDRCONF(NETDEV_UP): eth1: link is not ready






      Voici le résultat de la commande LSMOD :


      Module Size Used by
      vfat 46529 0
      fat 85873 1 vfat
      usb_storage 118561 0
      autofs4 63049 2
      i2c_dev 43977 0
      i2c_core 56129 1 i2c_dev
      hidp 83521 2
      l2cap 89281 5 hidp
      lockd 101297 0
      sunrpc 198537 2 lockd
      ip_conntrack_ftp 41361 0
      ip_conntrack_netbios_ns 36033 0
      ipt_REJECT 38977 1
      xt_state 35265 7
      ip_conntrack 91621 3 ip_conntrack_ftp,ip_conntrack_netbios_ns,xt_state
      nfnetlink 40457 1 ip_conntrack
      iptable_filter 36161 1
      ip_tables 55201 1 iptable_filter
      ip6t_REJECT 38849 1
      xt_tcpudp 36289 20
      ip6table_filter 36033 1
      ip6_tables 50049 1 ip6table_filter
      x_tables 50505 6 ipt_REJECT,xt_state,ip_tables,ip6t_REJECT,xt_tcpudp,ip6_tables
      dm_mirror 54737 0
      dm_multipath 56153 0
      scsi_dh 41665 1 dm_multipath
      ipv6 432161 19 ip6t_REJECT
      xfrm_nalgo 43333 1 ipv6
      crypto_api 42945 1 xfrm_nalgo
      parport_pc 62313 0
      lp 47121 0
      parport 73165 2 parport_pc,lp
      sr_mod 50789 0
      cdrom 68713 1 sr_mod
      snd_hda_intel 584593 4
      sg 70377 0
      shpchp 70892 0
      snd_seq_dummy 37061 0
      snd_seq_oss 65473 0
      snd_seq_midi_event 41025 1 snd_seq_oss
      snd_seq 87777 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
      snd_seq_device 41557 3 snd_seq_dummy,snd_seq_oss,snd_seq
      snd_pcm_oss 77377 0
      snd_mixer_oss 49985 1 snd_pcm_oss
      snd_pcm 116681 3 snd_hda_intel,snd_pcm_oss
      pcspkr 36289 0
      snd_timer 57161 3 snd_seq,snd_pcm
      snd_page_alloc 44113 2 snd_hda_intel,snd_pcm
      forcedeth 93968 0
      snd_hwdep 43593 1 snd_hda_intel
      hci_usb 51293 0
      snd 100073 15 snd_hda_intel,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep
      bluetooth 118853 3 hidp,l2cap,hci_usb
      soundcore 41825 1 snd
      dm_raid45 99657 0
      dm_message 36289 1 dm_raid45
      dm_region_hash 46145 1 dm_raid45
      dm_log 44993 3 dm_mirror,dm_raid45,dm_region_hash
      dm_mod 101521 4 dm_mirror,dm_multipath,dm_raid45,dm_log
      dm_mem_cache 38977 1 dm_raid45
      ahci 69449 2
      libata 209489 1 ahci
      sd_mod 56513 3
      scsi_mod 196697 6 usb_storage,scsi_dh,sr_mod,sg,libata,sd_mod
      ext3 168401 1
      jbd 94385 1 ext3
      uhci_hcd 57433 0
      ohci_hcd 55925 0
      ehci_hcd 66253 0






      Voici le résultat de la commande LSPCI -N :

      00:00.0 0600: 10de:0a82 (rev b1)
      00:00.1 0500: 10de:0a88 (rev b1)
      00:03.0 0601: 10de:0aae (rev b3)
      00:03.1 0500: 10de:0aa4 (rev b1)
      00:03.2 0c05: 10de:0aa2 (rev b1)
      00:03.3 0500: 10de:0a89 (rev b1)
      00:03.4 0500: 10de:0a98 (rev b1)
      00:03.5 0b40: 10de:0aa3 (rev b1)
      00:04.0 0c03: 10de:0aa5 (rev b1)
      00:04.1 0c03: 10de:0aa6 (rev b1)
      00:06.0 0c03: 10de:0aa7 (rev b1)
      00:06.1 0c03: 10de:0aa9 (rev b1)
      00:08.0 0403: 10de:0ac0 (rev b1)
      00:09.0 0604: 10de:0aab (rev b1)
      00:0a.0 0200: 10de:0ab0 (rev b1)
      00:0b.0 0101: 10de:0ab5 (rev b1)
      00:10.0 0604: 10de:0aa0 (rev b1)
      00:15.0 0604: 10de:0ac6 (rev b1)
      00:16.0 0604: 10de:0ac7 (rev b1)
      02:00.0 0300: 10de:0866 (rev b1)
      03:00.0 0280: 14e4:432b (rev 01)
      04:00.0 0c00: 11c1:5903 (rev 07)

      • [^] # Re: une autre piste ?

        Posté par  . Évalué à 2.

        dans le dmesg le message important c'est ca
        [...]
        hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
        input: HDA Digital PCBeep as /class/input/input7
        [...]

        pour le lspci essaie sans le -N
        afin de savoir quel ID est la carte son

        puis lspci -N avec uniquement la ligne commencant par l'ID trouvé precedemment

  • # MacBook MAO sous Centos : Pas de son

    Posté par  (site web personnel) . Évalué à 1.

    Salut et merci à tous pour vos conseils que je vais mettre en pratique dés que j'aurai créer une image de ce P _ _ _ _ N de macbook.

    Alors en complément :

    Mixer utilisé : Kmix

    Pas de son quand je veux lire un fichier m4a avec totem pourtant la lecture s'écoule et donc les images défilent.
    Pas de son quand je veux lire un fichier audio avec noatum, etc......

    Voici les résultats des commandes que vous m'aviez conseillé d'exécuter , si vous pouvez m'aider à les déchiffrer :-))

    Commande LSPCI -N

    00:00.0 0600: 10de:0a82 (rev b1)
    00:00.1 0500: 10de:0a88 (rev b1)
    00:03.0 0601: 10de:0aae (rev b3)
    00:03.1 0500: 10de:0aa4 (rev b1)
    00:03.2 0c05: 10de:0aa2 (rev b1)
    00:03.3 0500: 10de:0a89 (rev b1)
    00:03.4 0500: 10de:0a98 (rev b1)
    00:03.5 0b40: 10de:0aa3 (rev b1)
    00:04.0 0c03: 10de:0aa5 (rev b1)
    00:04.1 0c03: 10de:0aa6 (rev b1)
    00:06.0 0c03: 10de:0aa7 (rev b1)
    00:06.1 0c03: 10de:0aa9 (rev b1)
    00:08.0 0403: 10de:0ac0 (rev b1)
    00:09.0 0604: 10de:0aab (rev b1)
    00:0a.0 0200: 10de:0ab0 (rev b1)
    00:0b.0 0101: 10de:0ab5 (rev b1)
    00:10.0 0604: 10de:0aa0 (rev b1)
    00:15.0 0604: 10de:0ac6 (rev b1)
    00:16.0 0604: 10de:0ac7 (rev b1)
    02:00.0 0300: 10de:0866 (rev b1)
    03:00.0 0280: 14e4:432b (rev 01)
    04:00.0 0c00: 11c1:5903 (rev 07)



    Commande LSMOD

    Module Size Used by
    vfat 46529 0
    fat 85873 1 vfat
    usb_storage 118561 0
    autofs4 63049 2
    i2c_dev 43977 0
    i2c_core 56129 1 i2c_dev
    hidp 83521 2
    l2cap 89281 5 hidp
    lockd 101297 0
    sunrpc 198537 2 lockd
    ip_conntrack_ftp 41361 0
    ip_conntrack_netbios_ns 36033 0
    ipt_REJECT 38977 1
    xt_state 35265 7
    ip_conntrack 91621 3 ip_conntrack_ftp,ip_conntrack_netbios_ns,xt_state
    nfnetlink 40457 1 ip_conntrack
    iptable_filter 36161 1
    ip_tables 55201 1 iptable_filter
    ip6t_REJECT 38849 1
    xt_tcpudp 36289 20
    ip6table_filter 36033 1
    ip6_tables 50049 1 ip6table_filter
    x_tables 50505 6 ipt_REJECT,xt_state,ip_tables,ip6t_REJECT,xt_tcpudp,ip6_tables
    dm_mirror 54737 0
    dm_multipath 56153 0
    scsi_dh 41665 1 dm_multipath
    ipv6 432161 19 ip6t_REJECT
    xfrm_nalgo 43333 1 ipv6
    crypto_api 42945 1 xfrm_nalgo
    parport_pc 62313 0
    lp 47121 0
    parport 73165 2 parport_pc,lp
    sr_mod 50789 0
    cdrom 68713 1 sr_mod
    snd_hda_intel 584593 4
    sg 70377 0
    shpchp 70892 0
    snd_seq_dummy 37061 0
    snd_seq_oss 65473 0
    snd_seq_midi_event 41025 1 snd_seq_oss
    snd_seq 87777 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_seq_device 41557 3 snd_seq_dummy,snd_seq_oss,snd_seq
    snd_pcm_oss 77377 0
    snd_mixer_oss 49985 1 snd_pcm_oss
    snd_pcm 116681 3 snd_hda_intel,snd_pcm_oss
    pcspkr 36289 0
    snd_timer 57161 3 snd_seq,snd_pcm
    snd_page_alloc 44113 2 snd_hda_intel,snd_pcm
    forcedeth 93968 0
    snd_hwdep 43593 1 snd_hda_intel
    hci_usb 51293 0
    snd 100073 15 snd_hda_intel,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep
    bluetooth 118853 3 hidp,l2cap,hci_usb
    soundcore 41825 1 snd
    dm_raid45 99657 0
    dm_message 36289 1 dm_raid45
    dm_region_hash 46145 1 dm_raid45
    dm_log 44993 3 dm_mirror,dm_raid45,dm_region_hash
    dm_mod 101521 4 dm_mirror,dm_multipath,dm_raid45,dm_log
    dm_mem_cache 38977 1 dm_raid45
    ahci 69449 2
    libata 209489 1 ahci
    sd_mod 56513 3
    scsi_mod 196697 6 usb_storage,scsi_dh,sr_mod,sg,libata,sd_mod
    ext3 168401 1
    jbd 94385 1 ext3
    uhci_hcd 57433 0
    ohci_hcd 55925 0
    ehci_hcd 66253 0



    Commande DMESG



    Linux version 2.6.18-164.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Thu Sep 3 03:28:30 EDT 2009
    Command line: ro root=LABEL=/1 acpi=off rhgb quiet
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000010000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 0000000080000000 (usable)
    BIOS-e820: 0000000080000000 - 0000000090000000 (reserved)
    BIOS-e820: 0000000090000000 - 00000000be830000 (usable)
    BIOS-e820: 00000000be830000 - 00000000be834000 (ACPI NVS)
    BIOS-e820: 00000000be834000 - 00000000be84f000 (ACPI data)
    BIOS-e820: 00000000be84f000 - 00000000bea50000 (ACPI NVS)
    BIOS-e820: 00000000bea50000 - 00000000bfec6000 (ACPI data)
    BIOS-e820: 00000000bfec6000 - 00000000bfec8000 (ACPI NVS)
    BIOS-e820: 00000000bfec8000 - 00000000bfec9000 (ACPI data)
    BIOS-e820: 00000000bfec9000 - 00000000bfecb000 (ACPI NVS)
    BIOS-e820: 00000000bfecb000 - 00000000bfecd000 (ACPI data)
    BIOS-e820: 00000000bfecd000 - 00000000bfedf000 (ACPI NVS)
    BIOS-e820: 00000000bfedf000 - 00000000bfef9000 (ACPI data)
    BIOS-e820: 00000000bfef9000 - 00000000bfeff000 (reserved)
    BIOS-e820: 00000000bfeff000 - 00000000bff00000 (ACPI data)
    BIOS-e820: 00000000d3400000 - 00000000d3401000 (reserved)
    BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
    DMI 2.4 present.
    No NUMA configuration found
    Faking a node at 0000000000000000-0000000140000000
    Bootmem setup node 0 0000000000000000-0000000140000000
    No mptable found.
    Memory for crash kernel (0x0 to 0x0) notwithin permissible range
    disabling kdump
    On node 0 totalpages: 957625
    DMA zone: 2641 pages, LIFO batch:0
    DMA32 zone: 696424 pages, LIFO batch:31
    Normal zone: 258560 pages, LIFO batch:31
    Nvidia board detected. Ignoring ACPI timer override.
    Nosave address range: 000000000009f000 - 00000000000a0000
    Nosave address range: 00000000000a0000 - 00000000000e0000
    Nosave address range: 00000000000e0000 - 0000000000100000
    Nosave address range: 0000000080000000 - 0000000090000000
    Nosave address range: 00000000be830000 - 00000000be834000
    Nosave address range: 00000000be834000 - 00000000be84f000
    Nosave address range: 00000000be84f000 - 00000000bea50000
    Nosave address range: 00000000bea50000 - 00000000bfec6000
    Nosave address range: 00000000bfec6000 - 00000000bfec8000
    Nosave address range: 00000000bfec8000 - 00000000bfec9000
    Nosave address range: 00000000bfec9000 - 00000000bfecb000
    Nosave address range: 00000000bfecb000 - 00000000bfecd000
    Nosave address range: 00000000bfecd000 - 00000000bfedf000
    Nosave address range: 00000000bfedf000 - 00000000bfef9000
    Nosave address range: 00000000bfef9000 - 00000000bfeff000
    Nosave address range: 00000000bfeff000 - 00000000bff00000
    Nosave address range: 00000000bff00000 - 00000000d3400000
    Nosave address range: 00000000d3400000 - 00000000d3401000
    Nosave address range: 00000000d3401000 - 00000000f0000000
    Nosave address range: 00000000f0000000 - 00000000f4000000
    Nosave address range: 00000000f4000000 - 00000000fec00000
    Nosave address range: 00000000fec00000 - 00000000fec01000
    Nosave address range: 00000000fec01000 - 00000000fee00000
    Nosave address range: 00000000fee00000 - 00000000fee01000
    Nosave address range: 00000000fee01000 - 00000000ffc00000
    Nosave address range: 00000000ffc00000 - 0000000100000000
    Allocating PCI resources starting at d4000000 (gap: d3401000:1cbff000)
    SMP: Allowing 0 CPUs, 0 hotplug CPUs
    Built 1 zonelists. Total pages: 957625
    Kernel command line: ro root=LABEL=/1 acpi=off rhgb quiet
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Checking aperture...
    ACPI: DMAR not present
    PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Placing software IO TLB between 0x1623000 - 0x5623000
    Memory: 3755384k/5242880k available (2547k kernel code, 151940k reserved, 1289k data, 208k init)
    Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.02 BogoMIPS (lpj=2128012)
    Security Framework v1.0.0 initialized
    SELinux: Initializing.
    SELinux: Starting in permissive mode
    selinux_register_security: Registering secondary module capability
    Capability LSM initialized as secondary
    Mount-cache hash table entries: 256
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 3072K
    using mwait in idle threads.
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU0: Thermal monitoring enabled (TM2)
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 32k freed
    weird, boot CPU (#0) not listed by the BIOS.
    SMP motherboard not detected.
    Using local APIC timer interrupts.
    result 16625087
    Detected 16.625 MHz APIC timer.
    testing NMI watchdog ... OK.
    SMP disabled
    Brought up 1 CPUs
    testing NMI watchdog ... OK.
    time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer.
    time.c: Detected 2128.012 MHz processor.
    sizeof(vma)=176 bytes
    sizeof(page)=56 bytes
    sizeof(inode)=560 bytes
    sizeof(dentry)=216 bytes
    sizeof(ext3inode)=760 bytes
    sizeof(buffer_head)=96 bytes
    sizeof(skbuff)=248 bytes
    checking if image is initramfs... it is
    Freeing initrd memory: 2558k freed
    NET: Registered protocol family 16
    PCI: Using configuration type 1
    ACPI: Interpreter disabled.
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI: disabled
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    PCI: Probing PCI hardware
    PCI: Probing PCI hardware (bus 00)
    PCI: Transparent bridge - 0000:00:09.0
    PCI: Discovered primary peer bus ff [IRQ]
    PCI: Using IRQ router default [10de/0aa4] at 0000:00:03.1
    PCI: Cannot allocate resource region 0 of device 0000:00:03.5
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: DMAR not present
    PCI-GART: No AMD northbridge found.
    PCI: Bridge: 0000:00:09.0
    IO window: disabled.
    MEM window: d3300000-d33fffff
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:10.0
    IO window: 1000-1fff
    MEM window: d2000000-d30fffff
    PREFETCH window 0x00000000c0000000-0x00000000d1ffffff
    PCI: Bridge: 0000:00:15.0
    IO window: disabled.
    MEM window: d3200000-d32fffff
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:16.0
    IO window: disabled.
    MEM window: d3100000-d31fffff
    PREFETCH window: disabled.
    PCI: Enabling device 0000:00:09.0 (0000 -> 0002)
    PCI: Setting latency timer of device 0000:00:09.0 to 64
    PCI: Setting latency timer of device 0000:00:10.0 to 64
    PCI: No IRQ known for interrupt pin A of device 0000:00:15.0. Please try using pci=biosirq.
    PCI: Setting latency timer of device 0000:00:15.0 to 64
    PCI: No IRQ known for interrupt pin A of device 0000:00:16.0. Please try using pci=biosirq.
    PCI: Setting latency timer of device 0000:00:16.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    audit: initializing netlink socket (disabled)
    type=2000 audit(1253164362.435:1): initialized
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    SELinux: Registering netfilter hooks
    Initializing Cryptographic API
    alg: No test for crc32c (crc32c-generic)
    ksign: Installing public key data
    Loading keyring
    - Added public key 57F09578A977B70E
    - User ID: CentOS (Kernel Module GPG key)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Boot video device is 0000:02:00.0
    PCI: No IRQ known for interrupt pin A of device 0000:00:15.0. Please try using pci=biosirq.
    PCI: Setting latency timer of device 0000:00:15.0 to 64
    pcie_portdrv_probe->Dev[0ac6:10de] has invalid IRQ. Check vendor BIOS
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:15.0:pcie00]
    PCI: No IRQ known for interrupt pin A of device 0000:00:16.0. Please try using pci=biosirq.
    PCI: Setting latency timer of device 0000:00:16.0 to 64
    pcie_portdrv_probe->Dev[0ac7:10de] has invalid IRQ. Check vendor BIOS
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:16.0:pcie00]
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Real Time Clock Driver v1.12ac
    Non-volatile memory driver v1.2
    Linux agpgart interface v0.101 (c) Dave Jones
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    brd: module loaded
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    Probing IDE interface ide0...
    Probing IDE interface ide1...
    ide-floppy driver 0.99.newide
    usbcore: registered new driver hiddev
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    PNP: No PS/2 controller found. Probing ports directly.
    i8042.c: No controller found.
    mice: PS/2 mouse device common for all mice
    md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
    md: bitmap version 4.39
    TCP bic registered
    Initializing IPsec netlink socket
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Initalizing network drop monitor service
    Freeing unused kernel memory: 208k freed
    Write protecting the kernel read-only data: 496k
    PCI: Setting latency timer of device 0000:00:04.1 to 64
    ehci_hcd 0000:00:04.1: EHCI Host Controller
    ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:04.1: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:04.1
    ehci_hcd 0000:00:04.1: irq 10, io mem 0xd3489200
    ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 7 ports detected
    PCI: Setting latency timer of device 0000:00:06.1 to 64
    ehci_hcd 0000:00:06.1: EHCI Host Controller
    ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:06.1: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:06.1
    ehci_hcd 0000:00:06.1: irq 5, io mem 0xd3489100
    ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 5 ports detected
    ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    PCI: Setting latency timer of device 0000:00:04.0 to 64
    ohci_hcd 0000:00:04.0: OHCI Host Controller
    ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
    ohci_hcd 0000:00:04.0: irq 11, io mem 0xd3488000
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 7 ports detected
    usb 1-4: new high speed USB device using ehci_hcd and address 2
    PCI: Setting latency timer of device 0000:00:06.0 to 64
    ohci_hcd 0000:00:06.0: OHCI Host Controller
    ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
    ohci_hcd 0000:00:06.0: irq 7, io mem 0xd3487000
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 5 ports detected
    usb 1-4: configuration #1 chosen from 1 choice
    USB Universal Host Controller Interface driver v3.0
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ahci 0000:00:0b.0: version 3.0
    usb 3-5: new low speed USB device using ohci_hcd and address 2
    usb 3-5: configuration #1 chosen from 1 choice
    input: Apple Computer, Inc. IR Receiver as /class/input/input0
    input: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:04.0-5
    usb 3-6: new full speed USB device using ohci_hcd and address 3
    ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl IDE mode
    ahci 0000:00:0b.0: flags: 64bit ncq sntf pm led pmp pio slum part
    PCI: Setting latency timer of device 0000:00:0b.0 to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    scsi4 : ahci
    scsi5 : ahci
    ata1: SATA max UDMA/133 abar m8192@0xd3484000 port 0xd3484100 irq 81
    ata2: SATA max UDMA/133 abar m8192@0xd3484000 port 0xd3484180 irq 81
    ata3: DUMMY
    ata4: DUMMY
    ata5: DUMMY
    ata6: DUMMY
    usb 3-6: configuration #1 chosen from 1 choice
    input: Apple Inc. Apple Internal Keyboard / Trackpad as /class/input/input1
    input: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6
    input: Apple Inc. Apple Internal Keyboard / Trackpad as /class/input/input2
    input: USB HID v1.11 Mouse [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6
    input: Apple Inc. Apple Internal Keyboard / Trackpad as /class/input/input3
    input: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6
    ohci_hcd 0000:00:06.0: wakeup
    usb 4-1: new full speed USB device using ohci_hcd and address 2
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ATA-8: FUJITSU MHZ2160BH FFS G1, 00810091, max UDMA/100
    ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata1.00: configured for UDMA/100
    usb 4-1: configuration #1 chosen from 1 choice
    hub 4-1:1.0: USB hub found
    hub 4-1:1.0: 3 ports detected
    usb 4-1.1: new full speed USB device using ohci_hcd and address 3
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2.00: ATAPI: HL-DT-ST DVDRW GS22N, CP06, max UDMA/133, ATAPI AN
    ata2.00: configured for UDMA/133
    Vendor: ATA Model: FUJITSU MHZ2160B Rev: 0081
    Type: Direct-Access ANSI SCSI revision: 05
    SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: drive cache: write back
    SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: drive cache: write back
    sda:<6>usb 4-1.1: configuration #1 chosen from 1 choice
    usb 4-1.2: new full speed USB device using ohci_hcd and address 4
    usb 4-1.2: configuration #1 chosen from 1 choice
    input: HID 05ac:820a as /class/input/input4
    input: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:06.0-1.2
    sda1 sda2 sda3 sda4 sda5
    sd 0:0:0:0: Attached scsi disk sda
    Vendor: HL-DT-ST Model: DVDRW GS22N Rev: CP06
    Type: CD-ROM ANSI SCSI revision: 05
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
    device-mapper: dm-raid45: initialized v0.2594l
    usb 4-1.3: new full speed USB device using ohci_hcd and address 5
    usb 4-1.3: configuration #1 chosen from 1 choice
    input: HID 05ac:820b as /class/input/input5
    input: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:06.0-1.3
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    security: 3 users, 6 roles, 1914 types, 234 bools, 1 sens, 1024 cats
    security: 61 classes, 69080 rules
    SELinux: Completing initialization.
    SELinux: Setting up existing superblocks.
    SELinux: initialized (dev sda3, type ext3), uses xattr
    SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
    SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
    SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
    SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
    SELinux: initialized (dev devpts, type devpts), uses transition SIDs
    SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
    SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
    SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
    SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
    SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
    SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
    SELinux: initialized (dev proc, type proc), uses genfs_contexts
    SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
    SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
    SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
    type=1403 audit(1253164390.367:2): policy loaded auid=4294967295 ses=4294967295
    Bluetooth: Core ver 2.10
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: HCI USB driver ver 2.9
    usbcore: registered new driver hci_usb
    input: PC Speaker as /class/input/input6
    forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.62-Driver Package V1.25.
    PCI: Setting latency timer of device 0000:00:0a.0 to 64
    forcedeth: using HIGHDMA
    eth0: forcedeth.c: subsystem: 010de:cb79 bound to 0000:00:0a.0
    PCI: Setting latency timer of device 0000:00:08.0 to 64
    hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
    input: HDA Digital PCBeep as /class/input/input7
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    scsi 1:0:0:0: Attached scsi generic sg1 type 5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    floppy0: no floppy controllers found
    lp: driver loaded but no devices found
    SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    IPv6 over IPv4 tunneling driver
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    device-mapper: multipath: version 1.0.5 loaded
    EXT3 FS on sda3, internal journal
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    Adding 2229220k swap on /dev/sda5. Priority:-1 extents:1 across:2229220k
    SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
    IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
    ip6_tables: (C) 2000-2006 Netfilter Core Team
    ip_tables: (C) 2000-2006 Netfilter Core Team
    Netfilter messages via NETLINK v0.30.
    ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
    ADDRCONF(NETDEV_UP): eth1: link is not ready
    SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
    Bluetooth: L2CAP ver 2.8
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: HIDP (Human Interface Emulation) ver 1.1
    i2c /dev entries driver
    SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
    SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
    SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
    ADDRCONF(NETDEV_UP): eth1: link is not ready

Suivre le flux des commentaires

Note : les commentaires appartiennent à celles et ceux qui les ont postés. Nous n’en sommes pas responsables.