Bonjour,
J'essaye de faire fonctionner ma carte Pinnacle PCTV Studio/Rave (tuner Philips FI1216MFM).
J'ai un 2.6.14.4 sous debian unstable
Apparemment les modules se chargent bien voici un extrait de dmesg:
==========================================
bttv: driver version 0.9.16 loaded
bttv: using 4 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:02:09.0, irq: 217, latency: 64, mmio: 0xf7efe000
bttv0: detected: Pinnacle PCTV [bswap] [card=39], PCI subsystem ID is bd11:1200
bttv0: using: Pinnacle PCTV Studio Pro [card=52,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00ff27ff [init]
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: miro: id=9 tuner=3 radio=no stereo=no
bttv0: using tuner=3
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
bttv0: registered device video0
tuner 0-0060: type set to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF))registered device vbi0
=========================================
par contre lorsque je lance un scan avec scantv, il ne me trouve que canal+ et deux autres chaines sans nom : ou sont passer les chaines hertziennes ?
=========================================
scantv
please select your TV norm
   0: PAL
   1: NTSC
   2: SECAM
   3: PAL-Nc
   4: PAL-M
   5: PAL-N
   6: NTSC-JP
   7: PAL-60
nr ? 2
please select a frequency table
   0: us-bcast
   1: us-cable
   2: us-cable-hrc
   3: japan-bcast
   4: japan-cable
   5: europe-west
   6: europe-east
   7: italy
   8: newzealand
   9: australia
  10: ireland
  11: france
  12: china-bcast
  13: southafrica
  14: argentina
  15: australia-optus
  16: russia
nr ? 11
[global]
freqtab = france
[defaults]
input = Television
norm = SECAM
scanning channel list france...
K01  ( 47.75 MHz): no station
K02  ( 55.75 MHz): no station
K03  ( 60.50 MHz): no station
K04  ( 63.75 MHz): no station
K05  (176.00 MHz): Canal+
[Canal+]
channel = K05
K06  (184.00 MHz): no station
K07  (192.00 MHz): no station
K08  (200.00 MHz): no station
K09  (208.00 MHz): no station
K10  (216.00 MHz): no station
KB   (116.75 MHz): no station
KC   (128.75 MHz): no station
KD   (140.75 MHz): no station
KE   (159.75 MHz): no station
KF   (164.75 MHz): no station
KG   (176.75 MHz): ???
[unknown (KG)]
channel = KG
KH   (188.75 MHz): no station
KI   (200.75 MHz): no station
KJ   (212.75 MHz): no station
KK   (224.75 MHz): no station
KL   (236.75 MHz): no station
KM   (248.75 MHz): no station
KN   (260.75 MHz): no station
KO   (272.75 MHz): no station
KP   (284.75 MHz): no station
KQ   (296.75 MHz): no station
H01  (303.25 MHz): no station
H02  (311.25 MHz): no station
H03  (319.25 MHz): no station
H04  (327.25 MHz): no station
H05  (335.25 MHz): no station
H06  (343.25 MHz): no station
H07  (351.25 MHz): no station
H08  (359.25 MHz): no station
H09  (367.25 MHz): no station
H10  (375.25 MHz): no station
H11  (383.25 MHz): no station
H12  (391.25 MHz): no station
H13  (399.25 MHz): no station
H14  (407.25 MHz): no station
H15  (415.25 MHz): no station
H16  (423.25 MHz): no station
H17  (431.25 MHz): no station
H18  (439.25 MHz): no station
H19  (447.25 MHz): no station
21   (471.25 MHz): no station
22   (479.25 MHz): no station
23   (487.25 MHz): no station
24   (495.25 MHz): no station
25   (503.25 MHz): no station
26   (511.25 MHz): no station
27   (519.25 MHz): no station
28   (527.25 MHz): no station
29   (535.25 MHz): no station
30   (543.25 MHz): no station
31   (551.25 MHz): no station
32   (559.25 MHz): no station
33   (567.25 MHz): no station
34   (575.25 MHz): no station
35   (583.25 MHz): no station
36   (591.25 MHz): no station
37   (599.25 MHz): no station
38   (607.25 MHz): no station
39   (615.25 MHz): no station
40   (623.25 MHz): no station
41   (631.25 MHz): no station
42   (639.25 MHz): no station
43   (647.25 MHz): no station
44   (655.25 MHz): no station
45   (663.25 MHz): no station
46   (671.25 MHz): no station
47   (679.25 MHz): no station
48   (687.25 MHz): no station
49   (695.25 MHz): no station
50   (703.25 MHz): no station
51   (711.25 MHz): no station
52   (719.25 MHz): no station
53   (727.25 MHz): no station
54   (735.25 MHz): no station
55   (743.25 MHz): no station
56   (751.25 MHz): no station
57   (759.25 MHz): no station
58   (767.25 MHz): no station
59   (775.25 MHz): no station
60   (783.25 MHz): no station
61   (791.25 MHz): no station
62   (799.25 MHz): no station
63   (807.25 MHz): no station
64   (815.25 MHz): no station
65   (823.25 MHz): no station
66   (831.25 MHz): no station
67   (839.25 MHz): no station
68   (847.25 MHz): no station
69   (855.25 MHz): no station
=========================================
Merci pour vos conseils
Forum Linux.général Pinnacle PCTV Studio/Rave
3
jan.
2006
# coupleur UHF VHF ?
Posté par Guillaume D. . Évalué à 2.
si tu fais le test avec une tele ca donne quoi ?
car pour n'avoir que canal+ (en VHF) tu dois :
- soit etre branché uniquement sur l'antene VHF,
- soit ton coupleur VHF/UHF est mort
A+
[^] # Re: coupleur UHF VHF ?
Posté par Pierre Mallard . Évalué à 1.
Et bien sur ma tele ca marche bien, j'ai toutes les chaines qu'il faut (1-6)...
Sinon que penses tu du log de scantv :
est-ce que ca te semble normal que les chaines commence à 21 et pas à 1 ? (En dehors des K... et H.. dont je ne sais rien)??
[^] # Re: coupleur UHF VHF ?
Posté par fearan . Évalué à 2.
[Canal+]
channel = K06
[France 2]
channel = 22
[TF1]
channel = 25
[France 3]
channel = 28
[Arte / La Cinquième]
channel = 30
[unknown (33)]
channel = 33
[unknown (35)]
channel = 35
en espérant que ça puisse t'aider ^^
Mon scantv marcche bien, mais j'ai une bonne antenne ^^
Il ne faut pas décorner les boeufs avant d'avoir semé le vent
[^] # Re: coupleur UHF VHF ?
Posté par Pierre Mallard . Évalué à 1.
Je vien de regarder canal +, l'image est un peu crade mais ca marche bien et j'ai le son... Il faudrait creuser cote uvh et tout ca.. je vais regarder
Merci
[^] # Re: coupleur UHF VHF ?
Posté par Pierre Mallard . Évalué à 1.
[^] # Re: coupleur UHF VHF ?
Posté par Pierre Mallard . Évalué à 1.
-C' est quoi un coupleur UHF VHF ?
-Le probleme peut il venir du driver ?
Suivre le flux des commentaires
Note : les commentaires appartiennent à celles et ceux qui les ont postés. Nous n’en sommes pas responsables.