Forum Linux.mandriva Sound Blaster Live 5.1

Posté par  .
Étiquettes : aucune
0
29
juil.
2005
Bonjour a tous,

Je suis récament passé sous mandriva LE 2005, et je suis toujours confronté au même problème : celui de ma carte son sound blaster live 5.1

Si je n'utilise pas le son tout se passe bien, dès lors que j'utilise AmaroK, au bout de quelques minutes le son bug, et ceci fait buger ma connexion réseau par la même occasion.

j'ai essayé de trouver des drivers, mais sans succès...
Si vous avez des solutions, je suis toute ouï.
Merci d'avance pour votre aide.

Cordialement.
  • # plusieurs possiblibiltées

    Posté par  . Évalué à 2.

    Ca peut venir :

    - des drivers , si tu utilises le module oss ( emu10k1) , essaye les drivers alsa ( snd-emu10k ) .
    - du moteur qu'utilises amarok , il en existe plusieurs , arts , gstreamer , nas , xine... essaye aussi de les changer .

    Ps: Merci aux boulets de pas me moinsser , c'est extrement casse-couille de vouloir aider les gens et de se rendre compte que son commentaire est à -42 ( cf mon commentaire dans le forum sur le problème grub )
    • [^] # Re: plusieurs possiblibiltées

      Posté par  (site web personnel) . Évalué à 2.

      Bah écoute... Si ce que tu dis n'est pas super pertinent...
      Mais tu as raison aussi, tu essayes d'aider et c'est pas plaisant de se faire moinser (c'est pour cela que je ne le fait pas là)
      Mais essaye de soigner ton langage : "boulets", "casse-couille"
      Ya des enfants sur linuxfr tu sais :) (non plus moi mais quand j'ai commencé à utiliser linux, j'etais pas au lycée)

      Bref, frozenp semble etre nouveau sous linux. Il a installé une mandriva comme beaucoup de débutants.
      Il a un probleme avec amarok.

      Toi tu lui dit :
      "- des drivers , si tu utilises le module oss ( emu10k1) , essaye les drivers alsa ( snd-emu10k ) ."

      Je suis d'accord avec toi... Mais franchement, tu trouves ca facil pour un débutant ?

      Bon, je n'ai pas la prétention de vouloir l'aider mais : (je m'adresse à frozenp là)

      Essaye d'aller dans les reglages de ta mandriva au niveau son pour utiliser alsa qui est mieu que oss.
      Gstreamer et les autres d'ailleur, sont au dessus d'alsa ou oss. Tu peux dire à amarok d'utiliser gstreamer. Et gstreamer, tu peux lui dire d'utiliser alsa : lance gstreamer-properties en simple utilisateur.

      Pour le bug de ta connexion réseau, je ne sais pas d'ou ca vient dsl.
      • [^] # Re: plusieurs possiblibiltées

        Posté par  . Évalué à 1.

        merci de te soucier de mon cas, et bien oui je suis nouveau, j'utilise ALSA, j'ai télécharger des drivers. Là ou tu vas pouvoir m'aider c'est au niveau du " Make " ou " Make install " car je ne comprends pas coment utiliser cette ligne de commande.

        pour finir, j'ai essayer le lecteur Totem, mais sans succès, je vais donc essayer gsteamer, et je revienderais plus tard.

        merci beaucoup.
        • [^] # Re: plusieurs possiblibiltées

          Posté par  (site web personnel) . Évalué à 2.

          NONONONOONONONNON surtout ne telecharge pas les drivers
          alsa !!!!!

          Ou alors tu ne reviendra jamais sous linux...

          Il faut que tu utilise les outils mandrake de configuration de ta machine pour changer le systeme de gestion du son de OSS vers ALSA (bien qu'avec une mandriva recente je suis pas certains que tu utilise OSS).

          Essaye la chose suivante pour determiner le driver en cours:
          * ouvre un terminal texte (gnome-terminal / konsole / ou la console texte linux de base )
          * tape la commande suivante:
          /sbin/lsmod | grep emu

          normalement la ligne de texte suivante devrai te renseigner sur le driver en cours:
          * snd-emu10k1 => alsa
          * emu10k1 => oss
          Revient avec cette information.
          Ainsi que le resultat des commandes suivantes:
          * lspci -vv
          * cat /proc/interrupts
          * dmesg

          Pour informations j'ai eu que des cartes creatives sous linux car la qualité du son est bien meilleure qu'avec beaucoup d'autres cartes, que les deux drivers (oss/alsa) sont maintenant supers stables et permettent de gerer le 5.1 (avec plus ou moins de tambouille).

          J'ai eu des soucis avec le driver alsa a l'epoque de la sortie initiale de celui ci mais il avait a peine 2 semaines et je le deboguait justement. Depuis rien.

          Sinon mandriva faisant bien les choses la societe fournit des forums, des FAQ et de grosse quantité de documentation pour ses utilisateurs. Si tu le l'a pas fait etant donné ton manque de formation sur ce systeme je te conseillerait meme d'acheter un pack ou autre afin d'obtenir un support plus poussé si cela existe.

          On a rien sans rien et sans copain geek et sans aide reguliere tu n'arrivera qu'a progresser trop lentement et cela te gavera vite fait amha.

          Pour ta connexion adsl si tu indiquait le materiel mis en oeuvre pour celle ci cela pourrait aider.


          Essaie toujours les correctifs suivants:
          * deplacer la carte son d'un slot pci a un autre pour utiliser une
          autre irq pci (il n'y en a pas beaucoup 3/4 souvent cf la doc de ta
          carte mere).

          * booter la mandrake avec l'option 'acpi=off' voire 'acpi=off apic=off'
          cf la doc de ta distribution pour rajouter des options au noyau (ou
          recherche les forums hardware.fr clubic.com sur mandrake|mandriva et acpi

          Car selon les symptomes que tu annonce et l'effet de bord sur la cnx
          adsl (qui doit etre gerre par un modem usb a tout les coup, non ?)
          ce sont les deux points qui doivent etre en cause.
          • [^] # Re: plusieurs possiblibiltées

            Posté par  . Évalué à 1.

            * j'utilise alsa, ca c'est sure

            * Reponse a la ligne de commande lspci -vv tres longue :-) :

            00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
            Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-
            Latency: 0
            Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
            Capabilities: <available only to root>

            00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
            Subsystem: nVidia Corporation: Unknown device 0c17
            Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
            Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-

            00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
            Subsystem: nVidia Corporation: Unknown device 0c17
            Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
            Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-

            00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
            Subsystem: nVidia Corporation: Unknown device 0c17
            Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
            Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-

            00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
            Subsystem: nVidia Corporation: Unknown device 0c17
            Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
            Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-

            00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
            Subsystem: nVidia Corporation: Unknown device 0c17
            Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
            Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-

            00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
            Subsystem: Giga-byte Technology: Unknown device 0c11
            Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-
            Latency: 0
            Capabilities: <available only to root>

            00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
            Subsystem: Giga-byte Technology: Unknown device 0c11
            Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-
            Interrupt: pin A routed to IRQ 11
            Region 0: I/O ports at ec00 [size=32]
            Capabilities: <available only to root>

            00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
            Subsystem: Giga-byte Technology: Unknown device 5004
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-
            Latency: 0 (750ns min, 250ns max)
            Interrupt: pin A routed to IRQ 9
            Region 0: Memory at d8001000 (32-bit, non-prefetchable) [size=4K]
            Capabilities: <available only to root>

            00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
            Subsystem: Giga-byte Technology: Unknown device 5004
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-
            Latency: 0 (750ns min, 250ns max)
            Interrupt: pin B routed to IRQ 10
            Region 0: Memory at d8002000 (32-bit, non-prefetchable) [size=4K]
            Capabilities: <available only to root>

            00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 20 [EHCI])
            Subsystem: Giga-byte Technology: Unknown device 5004
            Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-
            Latency: 0 (750ns min, 250ns max)
            Interrupt: pin C routed to IRQ 11
            Region 0: Memory at d8003000 (32-bit, non-prefetchable) [size=256]
            Capabilities: <available only to root>

            00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) (prog-if 00 [Normal decode])
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
            Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-
            Latency: 0
            Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
            I/O behind bridge: 0000d000-0000dfff
            Memory behind bridge: d7000000-d7ffffff
            Prefetchable memory behind bridge: d4000000-d4ffffff
            BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

            00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP])
            Subsystem: Giga-byte Technology: Unknown device 5002
            Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-<MAbort- >SERR- <PERR-
            Latency: 0 (750ns min, 250ns max)
            Region 4: I/O ports at f000 [size=16]
            Capabilities: <available only to root>

            00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normaldecode])
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
            Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
            Latency: 32
            Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
            Memory behind bridge: d5000000-d6ffffff
            Prefetchable memory behind bridge: c0000000-cfffffff
            BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

            01:08.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a)
            Subsystem: Creative Labs SBLive! 5.1 Digital Model SB0220
            Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
            Latency: 32 (500ns min, 5000ns max)
            Interrupt: pin A routed to IRQ 11
            Region 0: I/O ports at d000 [size=32]
            Capabilities: <available only to root>

            01:08.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 0a)
            Subsystem: Creative Labs Gameport Joystick
            Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
            Latency: 32
            Region 0: I/O ports at d400 [size=8]
            Capabilities: <available only to root>

            01:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
            Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver)
            Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
            Latency: 32 (4000ns min, 10000ns max)
            Interrupt: pin A routed to IRQ 9
            Region 0: Memory at d4000000 (32-bit, prefetchable) [size=4K]
            Capabilities: <available only to root>

            01:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
            Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver, audio section)
            Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
            Latency: 32 (1000ns min, 63750ns max)
            Interrupt: pin A routed to IRQ 9
            Region 0: Memory at d4001000 (32-bit, prefetchable) [size=4K]
            Capabilities: <available only to root>

            01:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
            Subsystem: Giga-byte Technology GA-7VM400M/7VT600 Motherboard
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
            Latency: 32 (8000ns min, 16000ns max)
            Interrupt: pin A routed to IRQ 11
            Region 0: I/O ports at d800 [size=256]
            Region 1: Memory at d7000000 (32-bit, non-prefetchable) [size=256]
            Capabilities: <available only to root>

            02:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) (prog-if 00 [VGA])
            Subsystem: LeadTek Research Inc.: Unknown device 2960
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
            Latency: 32 (1250ns min, 250ns max)
            Interrupt: pin A routed to IRQ 19
            Region 0: Memory at d5000000 (32-bit, non-prefetchable) [size=16M]
            Region 1: Memory at c0000000 (32-bit, prefetchable) [size=256M]
            Expansion ROM at [disabled] [size=128K]
            Capabilities: <available only to root>

            ensuite,

            * Reponse a la ligne de commande cat /proc/interrupts :

            CPU0
            0: 438848 IO-APIC-edge timer
            1: 562 IO-APIC-edge i8042
            2: 0 XT-PIC cascade
            8: 1 IO-APIC-edge rtc
            9: 0 XT-PIC ohci_hcd, bttv0, bt878
            10: 0 IO-APIC-edge ohci_hcd
            11: 5236 IO-APIC-edge ehci_hcd, eth0, EMU10K1
            12: 40540 IO-APIC-edge i8042
            14: 10186 IO-APIC-edge ide0
            15: 3807 IO-APIC-edge ide1
            NMI: 0
            LOC: 438766
            ERR: 0
            MIS: 0


            * Reponse a la ligne de commande dmesg :

            Linux version 2.6.11-6mdk (gb@n2.mandrakesoft.com) (gcc version 3.4.3 (Mandrakelinux 10.2 3.4.3-3mdk)) #1 Tue Mar 22 16:04:32 CET 2005
            BIOS-provided physical RAM map:
            BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
            BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
            BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
            BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
            BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
            BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
            BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
            BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
            BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
            127MB HIGHMEM available.
            896MB LOWMEM available.
            found SMP MP-table at 000f5080
            On node 0 totalpages: 262128
            DMA zone: 4096 pages, LIFO batch:1
            Normal zone: 225280 pages, LIFO batch:16
            HighMem zone: 32752 pages, LIFO batch:7
            DMI 2.3 present.
            ACPI: RSDP (v000 Nvidia ) @ 0x000f6920
            ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3000
            ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040
            ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff7500
            ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
            ACPI: PM-Timer IO Port: 0x1008
            ACPI: Local APIC address 0xfee00000
            ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
            Processor #0 6:8 APIC version 16
            ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
            Using ACPI for processor (LAPIC) configuration information
            Intel MultiProcessor Specification v1.4
            Virtual Wire compatibility mode.
            OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
            I/O APIC #2 Version 17 at 0xFEC00000.
            Enabling APIC mode: Flat. Using 1 I/O APICs
            Processors: 1
            Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
            Built 1 zonelists
            mapped APIC to ffffd000 (fee00000)
            mapped IOAPIC to ffffc000 (fec00000)
            Initializing CPU#0
            Kernel command line: BOOT_IMAGE=linux-nonfb ro root=305 acpi=ht resume=/dev/hda9
            PID hash table entries: 4096 (order: 12, 65536 bytes)
            Detected 2079.463 MHz processor.
            Using pmtmr for high-res timesource
            Console: colour VGA+ 80x25
            Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
            Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
            Memory: 1034964k/1048512k available (2295k kernel code, 12928k reserved, 686k data, 264k init, 131008k highmem, 0k BadRAM)
            Checking if this processor honours the WP bit even in supervisor mode... Ok.
            Calibrating delay loop... 4120.57 BogoMIPS (lpj=2060288)
            Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
            CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 0000000000000000 00000000
            CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
            CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
            CPU: L2 Cache: 256K (64 bytes/line)
            CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
            Intel machine check architecture supported.
            Intel machine check reporting enabled on CPU#0.
            CPU: AMD Athlon(tm) XP 2600+ stepping 01
            Enabling fast FPU save and restore... done.
            Enabling unmasked SIMD FPU exception support... done.
            Checking 'hlt' instruction... OK.
            ENABLING IO-APIC IRQs
            ..TIMER: vector=0x31 pin1=2 pin2=0
            ..MP-BIOS bug: 8254 timer not connected to IO-APIC
            ...trying to set up timer (IRQ0) through the 8259A ...
            ..... (found pin 0) ...works.
            checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
            Freeing initrd memory: 217k freed
            NET: Registered protocol family 16
            PCI: PCI BIOS revision 2.10 entry at 0xfa900, last bus=2
            PCI: Using configuration type 1
            mtrr: v2.0 (20020519)
            ACPI: Subsystem revision 20050211
            ACPI: Interpreter disabled.
            Linux Plug and Play Support v0.97 (c) Adam Belay
            pnp: PnP ACPI: disabled
            PnPBIOS: Disabled
            PCI: Probing PCI hardware
            PCI: Probing PCI hardware (bus 00)
            PCI: nForce2 C1 Halt Disconnect fixup
            PCI: Discovered primary peer bus ff [IRQ]
            PCI: Using IRQ router default [10de/01e0] at 0000:00:00.0
            PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 19
            apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
            audit: initializing netlink socket (disabled)
            audit(1122683180.911:0): initialized
            highmem bounce pool size: 64 pages
            inotify device minor=63
            VFS: Disk quotas dquot_6.5.1
            Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
            devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
            devfs: boot_options: 0x0
            Initializing Cryptographic API
            isapnp: Scanning for PnP cards...
            isapnp: No Plug & Play device found
            Real Time Clock Driver v1.12
            serio: i8042 AUX port at 0x60,0x64 irq 12
            serio: i8042 KBD port at 0x60,0x64 irq 1
            Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
            ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
            ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
            io scheduler noop registered
            io scheduler anticipatory registered
            io scheduler deadline registered
            io scheduler cfq registered
            RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
            pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
            Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
            ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
            NFORCE2: IDE controller at PCI slot 0000:00:09.0
            NFORCE2: chipset revision 162
            NFORCE2: not 100% native mode: will probe irqs later
            NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
            NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
            ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
            ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
            Probing IDE interface ide0...
            hda: Maxtor 6Y250P0, ATA DISK drive
            ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
            Probing IDE interface ide1...
            hdc: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
            ide1 at 0x170-0x177,0x376 on irq 15
            hda: max request size: 1024KiB
            hda: Host Protected Area detected.
            current capacity is 490232639 sectors (250999 MB)
            native capacity is 490234752 sectors (251000 MB)
            hda: Host Protected Area disabled.
            hda: 490234752 sectors (251000 MB) w/7936KiB Cache, CHS=30515/255/63, UDMA(133)
            hda: cache flushes supported
            /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 p10 >
            mice: PS/2 mouse device common for all mice
            input: AT Translated Set 2 keyboard on isa0060/serio0
            input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
            md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
            NET: Registered protocol family 2
            IP: routing cache hash table of 8192 buckets, 64Kbytes
            TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
            TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
            TCP: Hash tables configured (established 262144 bind 65536)
            NET: Registered protocol family 1
            BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
            devfs_mk_dev: could not append to parent for md/0
            md: Autodetecting RAID arrays.
            md: autorun ...
            md: ... autorun DONE.
            RAMDISK: Compressed image found at block 0
            VFS: Mounted root (ext2 filesystem).
            kjournald starting. Commit interval 5 seconds
            EXT3-fs: mounted filesystem with ordered data mode.
            Freeing unused kernel memory: 264k freed
            usbcore: registered new driver usbfs
            usbcore: registered new driver hub
            ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
            ohci_hcd 0000:00:02.0: OHCI Host Controller
            PCI: Setting latency timer of device 0000:00:02.0 to 64
            ohci_hcd 0000:00:02.0: irq 9, pci mem 0xd8001000
            ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
            hub 1-0:1.0: USB hub found
            hub 1-0:1.0: 3 ports detected
            ohci_hcd 0000:00:02.1: OHCI Host Controller
            PCI: Setting latency timer of device 0000:00:02.1 to 64
            ohci_hcd 0000:00:02.1: irq 10, pci mem 0xd8002000
            ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
            hub 2-0:1.0: USB hub found
            hub 2-0:1.0: 3 ports detected
            ehci_hcd 0000:00:02.2: EHCI Host Controller
            PCI: Setting latency timer of device 0000:00:02.2 to 64
            ehci_hcd 0000:00:02.2: irq 11, pci mem 0xd8003000
            ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
            PCI: cache line size of 64 is not supported by device 0000:00:02.2
            ehci_hcd 0000:00:02.2: park 0
            ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
            hub 3-0:1.0: USB hub found
            hub 3-0:1.0: 6 ports detected
            EXT3 FS on hda5, internal journal
            Adding 1124508k swap on /dev/hda9. Priority:-1 extents:1
            Linux video capture interface: v1.00
            bttv: driver version 0.9.15 loaded
            bttv: using 8 buffers with 2080k (520 pages) each for capture
            bttv: Bt8xx card found (0).
            bttv0: Bt878 (rev 17) at 0000:01:0a.0, irq: 9, latency: 32, mmio: 0xd4000000
            bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
            bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
            bttv0: gpio: en=00000000, out=00000000 in=00fffbff [init]
            bttv0: i2c: checking for MSP34xx @ 0x80... found
            bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes
            bttv0: using tuner=33
            bttv0: i2c: checking for MSP34xx @ 0x80... found
            msp34xx: init: chip=MSP3410G-B11 +nicam +simple +simpler +radio mode=simple
            msp3410: daemon started
            bttv0: i2c: checking for TDA9875 @ 0xb0... not found
            bttv0: i2c: checking for TDA7432 @ 0x8a... not found
            tda9885/6/7: chip found @ 0x96
            tuner: chip found at addr 0xc0 i2c-bus bt878 #0 [sw]
            tuner: type set to 33 (MT20xx universal) by bt878 #0 [sw]
            tuner: microtune: companycode=3dbf part=42 rev=2f
            tuner: microtune MT2050 found, OK
            bttv0: registered device video0
            bttv0: registered device vbi0
            bttv0: registered device radio0
            bttv0: PLL: 28636363 => 35468950 .. ok
            bt878: AUDIO driver version 0.0.0 loaded
            bt878: Bt878 AUDIO function found (0).
            bt878(0): Bt878 (rev 17) at 01:0a.1, irq: 9, latency: 32, memory: 0xd4001000
            gameport: pci0000:01:08.1 speed 852 kHz
            Linux agpgart interface v0.100 (c) Dave Jones
            agpgart: Detected NVIDIA nForce2 chipset
            agpgart: Maximum main memory to use for agp memory: 941M
            agpgart: AGP aperture is 64M @ 0xd0000000
            Supermount version 2.0.4 for kernel 2.6
            ntfs: Ignoring new-style parameters in presence of obsolete ones
            NTFS driver 2.1.22 [Flags: R/O DEBUG MODULE].
            NTFS volume version 3.1.
            NTFS volume version 3.1.
            NTFS volume version 3.1.
            NTFS volume version 3.1.
            loop: loaded (max 8 devices)
            hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
            Uniform CD-ROM driver Revision: 3.20
            8139too Fast Ethernet driver 0.9.27
            eth0: RealTek RTL8139 at 0xf89ae000, 00:0d:61:11:94:31, IRQ 11
            eth0: Identified 8139 chip type 'RTL-8100B/8139D'
            ip_conntrack version 2.1 (8191 buckets, 65528 max) - 248 bytes per conntrack
            ip_tables: (C) 2000-2002 Netfilter core team
            Floppy drive(s): fd0 is 1.44M
            FDC 0 is a post-1991 82077
            NET: Registered protocol family 17
            eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
            ip_tables: (C) 2000-2002 Netfilter core team
            ip_conntrack version 2.1 (8191 buckets, 65528 max) - 248 bytes per conntrack
            snd-mixer-oss: Unknown symbol snd_unregister_oss_device
            snd-mixer-oss: Unknown symbol snd_register_oss_device
            snd-mixer-oss: Unknown symbol snd_mixer_oss_notify_callback
            snd-mixer-oss: Unknown symbol snd_oss_info_register
            snd-pcm-oss: Unknown symbol snd_unregister_oss_device
            snd-pcm-oss: Unknown symbol snd_register_oss_device
            snd-pcm-oss: Unknown symbol snd_mixer_oss_ioctl_card
            snd-pcm-oss: Unknown symbol snd_oss_info_register
            snd-mixer-oss: Unknown symbol snd_unregister_oss_device
            snd-mixer-oss: Unknown symbol snd_register_oss_device
            snd-mixer-oss: Unknown symbol snd_mixer_oss_notify_callback
            snd-mixer-oss: Unknown symbol snd_oss_info_register
            snd-mixer-oss: Unknown symbol snd_unregister_oss_device
            snd-mixer-oss: Unknown symbol snd_register_oss_device
            snd-mixer-oss: Unknown symbol snd_mixer_oss_notify_callback
            snd-mixer-oss: Unknown symbol snd_oss_info_register
            snd-pcm-oss: Unknown symbol snd_unregister_oss_device
            snd-pcm-oss: Unknown symbol snd_register_oss_device
            snd-pcm-oss: Unknown symbol snd_mixer_oss_ioctl_card
            snd-pcm-oss: Unknown symbol snd_oss_info_register
            snd-seq-oss: Unknown symbol snd_unregister_oss_device
            snd-seq-oss: Unknown symbol snd_register_oss_device
            snd-seq-oss: Unknown symbol snd_oss_info_register
            NET: Registered protocol family 10
            Disabled Privacy Extensions on device c03b26e0(lo)
            IPv6 over IPv4 tunneling driver
            Disabled Privacy Extensions on device f74bc800(sit0)
            Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.0.2 DST=224.0.0.251 LEN=73TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53
            Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.0.2 DST=224.0.0.251 LEN=73TOS=0x00 PREC=0x00 TTL=255 ID=1 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53
            Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.0.2 DST=224.0.0.251 LEN=73TOS=0x00 PREC=0x00 TTL=255 ID=2 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53
            Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.0.2 DST=224.0.0.251 LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=3 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85
            parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
            parport0: irq 7 detected
            lp0: using parport0 (polling).
            lp0: console ready
            Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
            Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.0.2 DST=224.0.0.251 LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=4 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85
            Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.0.2 DST=224.0.0.251 LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=5 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85
            Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.0.2 DST=224.0.0.251 LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=6 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85
            eth0: no IPv6 routers present
            Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.0.2 DST=224.0.0.251 LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85
            Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.0.2 DST=224.0.0.251 LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85
            Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.0.2 DST=224.0.0.251 LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85
            Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.0.2 DST=224.0.0.251 LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=10 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85

            PS : dans le fond, tu me dira si toute la reponse est nécéssaire, mais je suis débutant donc je ne sais pas :)


            A part ca, je suis connecter a internet via une passerelle residentiel dont tu apercevera peut etre la configuration dans les résultats précédent.

            Merci d'avance de ton aide,
            • [^] # Re: plusieurs possiblibiltées

              Posté par  (site web personnel) . Évalué à 1.

              Bon j'ai deja rencontré ton pb, il s'agit d'un bug dans le module arts de amarok qui chie sous la 2005LE (J'ai jamais réussi a le faire marcher correctement a l'époque)

              Il ont corrigé ça dans la cooker (enfin maintenant c'est le module gstreamer que j'ai pas réussi a faire marcher, mais bon c'est vraiment une usine a gaz...)

              Pour résoudre ton pb tu cherche un paquet amarok avec xine dedans :
              sous cooker c'est ça qu'il faut tapper, ça sera surement pas loin sur ta 2005LE
              urpmi amarok-engine-xine

              Après tu lance ton amarok en lui disant de se taire, tu va dans la config et tu choisi le module xine que tu vient d'installer et tu profite du son trankil...

              ps : lance draksound en root et vérifie que tu utilise bien snd-emu10k1
              dans kcontrol tu peux spécifier le système de son a alsa et fait appliquer (/!\ VÉRIFIE QUE TU A RIEN QUI SORT EN SON A CE MOMENT LÀ!!!).
            • [^] # Re: plusieurs possiblibiltées

              Posté par  (site web personnel) . Évalué à 2.

              En voyant la reponse au dessus je m'apercois que j'ai oublie un point
              important: avais tu tester ta sortie son avec autre chose que amarok.
              Ex la commande 'aplay' en terminal pour joue un .wav ou mpg123/ogg123.

              Sinon ta reponse complete est interessante sur bien des points,
              notamment la dessus:
              11: 5236 IO-APIC-edge ehci_hcd, eth0, EMU10K1

              Ta carte son, ta carte reseau et tes ports usb2 sont geres sur la meme
              IRQ. Ce n'est pas forcement un mal, mais il faudrait vraiement
              essayer de deplacer l'une ou l'autre des cartes car le reseau
              et l'audio sont deux choses generant beauoup d'interruptions
              materielle et si il y a un soucis avec l'un des drivers ...

              Sinon vu que tu tourne sur une nforce2 as tu essaye de booter en desactivant l'acpi comme je l'ai proposé ?

              Il y a aussi de toute evidence un probleme avec tes modules alsa, en effet la couche de compatibilité oss semble avoir des difficultées au chargement (ou tu a tente un chargement manuel).

              A ta place je ferai quelques tests dans l'ordre suivant:

              1/ verifier que le probleme ne vient pas du player (tester xmms, ogg123, mpg123, autre)
              2/ verfiier que le probleme ne vient pas de l'acpi ou de l'apic (important c'est un probleme courant des kernels mandrake et des nforce).
              3/ verifier que le probleme ne vient pas d'un conflit entre drivers/cartes. Ex décharger la carte reseau:
              ifconfig eth0 down
              rmmod 8139too
              (en root)
              • [^] # Problemes résolus

                Posté par  . Évalué à 1.

                Voila, les problemes son resolus, je m'explique :

                c'est grâce a vous et votre aide, je reprends le probleme apres reflexion, je ne pouvais pas utiliser les fonctions réseau, son et USB ( 2 ports ) en meme temps sans générer un conflit entre les matériels. En effet, ces fonctions étaient gérées sur la même IRQ. j'ai donc changé de slot PCI ma carte son ( la carte réseau et les port USB étant intégrées ), mais dans ces cas là, je n'avais plus rien du tout, ni réseau ni son. Comme la fait remarquer -=[ Benoit Plessis ]=- dans le poste précédent :

                2/ verfiier que le probleme ne vient pas de l'acpi ou de l'apic (important c'est un probleme courant des kernels mandrake et des nforce).

                Au final, le problème ne venais pas de ma carte son mais de mon chipset nforce 2.
                Merci a vous car si le problème n'étais pas résolus j'aurais changé de carte son...

                Merci et a Bientôt

Suivre le flux des commentaires

Note : les commentaires appartiennent à celles et ceux qui les ont postés. Nous n’en sommes pas responsables.