starfox85 a écrit 5 commentaires

Bonsoir,
Voici la réponse à votre question:

lspci -v
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Subsystem: Acer Incorporated [ALI] Mobile 4 Series Chipset Memory Controller Hub
Flags: bus master, fast devsel, latency 0
Capabilities:

00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller])
Subsystem: Acer Incorporated [ALI] Mobile 4 Series Chipset Integrated Graphics Controller
Flags: bus master, fast devsel, latency 0, IRQ 29
Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 1800 [size=8]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities:
Kernel driver in use: i915
Kernel modules: i915

00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Acer Incorporated [ALI] Mobile 4 Series Chipset Integrated Graphics Controller
Flags: bus master, fast devsel, latency 0
Memory at f0400000 (64-bit, non-prefetchable) [size=1M]
Capabilities:

00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] 82801I (ICH9 Family) USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 1820 [size=32]
Capabilities:
Kernel driver in use: uhci_hcd

00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] 82801I (ICH9 Family) USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at 1840 [size=32]
Capabilities:
Kernel driver in use: uhci_hcd

00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] 82801I (ICH9 Family) USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 1860 [size=32]
Capabilities:
Kernel driver in use: uhci_hcd

00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] 82801I (ICH9 Family) USB2 EHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 19
Memory at f0b04800 (32-bit, non-prefetchable) [size=1K]
Capabilities:
Kernel driver in use: ehci-pci

00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Acer Incorporated [ALI] 82801I (ICH9 Family) HD Audio Controller
Flags: bus master, fast devsel, latency 0, IRQ 31
Memory at f0900000 (64-bit, non-prefetchable) [size=16K]
Capabilities:
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 24
Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c0000000-c01fffff
Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff
Capabilities:
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 25
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: c0400000-c06fffff
Prefetchable memory behind bridge: 00000000c0700000-00000000c08fffff
Capabilities:
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 26
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: c0900000-c0bfffff
Prefetchable memory behind bridge: 00000000c0c00000-00000000c0dfffff
Capabilities:
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 27
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: c0e00000-c10fffff
Prefetchable memory behind bridge: 00000000c1100000-00000000c12fffff
Capabilities:
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] 82801I (ICH9 Family) USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at 1880 [size=32]
Capabilities:
Kernel driver in use: uhci_hcd

00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] 82801I (ICH9 Family) USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 18a0 [size=32]
Capabilities:
Kernel driver in use: uhci_hcd

00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] 82801I (ICH9 Family) USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 18c0 [size=32]
Capabilities:
Kernel driver in use: uhci_hcd

00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] 82801I (ICH9 Family) USB2 EHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at f0b04c00 (32-bit, non-prefetchable) [size=1K]
Capabilities:
Kernel driver in use: ehci-pci

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0a, subordinate=0e, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: f0800000-f08fffff
Capabilities:

00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
Subsystem: Acer Incorporated [ALI] ICH9M LPC Interface Controller
Flags: bus master, medium devsel, latency 0
Capabilities:
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich

00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller AHCI mode (prog-if 01 [AHCI 1.0])
Subsystem: Acer Incorporated [ALI] 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 28
I/O ports at 1818 [size=8]
I/O ports at 180c [size=4]
I/O ports at 1810 [size=8]
I/O ports at 1808 [size=4]
I/O ports at 18e0 [size=32]
Memory at f0b04000 (32-bit, non-prefetchable) [size=2K]
Capabilities:
Kernel driver in use: ahci
Kernel modules: ahci

00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: Acer Incorporated [ALI] 82801I (ICH9 Family) SMBus Controller
Flags: medium devsel, IRQ 10
Memory at c1300000 (64-bit, non-prefetchable) [size=256]
I/O ports at 1c00 [size=32]
Kernel modules: i2c_i801

06:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller
Subsystem: Acer Incorporated [ALI] SD/MMC Host Controller
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at c0400000 (32-bit, non-prefetchable) [size=256]
Capabilities:
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci

06:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (prog-if 01)
Subsystem: Acer Incorporated [ALI] Standard SD Host Controller
Flags: fast devsel, IRQ 18
Memory at c0400100 (32-bit, non-prefetchable) [size=256]
Capabilities:
Kernel modules: sdhci_pci

06:00.3 System peripheral: JMicron Technology Corp. MS Host Controller
Subsystem: Acer Incorporated [ALI] MS Host Controller
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at c0400200 (32-bit, non-prefetchable) [size=256]
Capabilities:
Kernel driver in use: jmb38x_ms
Kernel modules: jmb38x_ms

06:00.4 System peripheral: JMicron Technology Corp. xD Host Controller
Subsystem: Acer Incorporated [ALI] xD Host Controller
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at c0400300 (32-bit, non-prefetchable) [size=256]
Capabilities:

07:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak]
Subsystem: Intel Corporation Centrino Wireless-N 1000 BGN
Flags: bus master, fast devsel, latency 0, IRQ 30
Memory at c0900000 (64-bit, non-prefetchable) [size=8K]
Capabilities:
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi

09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5764M Gigabit Ethernet PCIe (rev 10)
Subsystem: Acer Incorporated [ALI] NetXtreme BCM5764M Gigabit Ethernet PCIe
Flags: bus master, fast devsel, latency 0, IRQ 32
Memory at c0e00000 (64-bit, non-prefetchable) [size=64K]
Capabilities:
Kernel driver in use: tg3
Kernel modules: tg3

0a:04.0 CardBus bridge: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus Controller (rev 40)
Subsystem: Acer Incorporated [ALI] OZ601/6912/711E0 CardBus/SmartCardBus Controller
Flags: bus master, stepping, slow devsel, latency 168, IRQ 16
Memory at f0800000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=0a, secondary=0b, subordinate=0e, sec-latency=176
Memory window 0: c4000000-c7ffffff (prefetchable)
Memory window 1: c8000000-cbffffff
I/O window 0: 00006000-000060ff
I/O window 1: 00006400-000064ff
16-bit legacy interface ports at 0001
Capabilities:
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket

patrick@patrick-TravelMate-7730 ~ $

Bonjour

Voici la réponse que j'obtiens en faisant la manip que tu me proposes:

Screen 0: minimum 8 x 8, current 1440 x 900, maximum 32767 x 32767
LVDS1 connected primary 1440x900+0+0 (normal left inverted right x axis y axis) 367mm x 229mm
1440x900 60.00*+ 59.89

1360x768 59.80 59.96

1280x800 60.00

1152x864 60.00

1024x768 60.00

800x600 60.32 56.25

720x450 60.00

640x480 59.94

DP1 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
TV1 disconnected (normal left inverted right x axis y axis)
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted righ

Comme mon problème continue de durer, j'ai acheté un adaptateur vga/hdmi, qui me détecte bien les deux écrans, mais je n'ai toujours pas le résultat de mes recherches.Ce qui est rageant, c'est que mon projo fonctionne très bien avec windows 10. Bien sûr, je veux conserver mon linux. Pourquoi est-ce si compliqué? Il ne s'agit que d'un simple problème de branchement……

Ok merci infiniment. Mais moi, je ne comprends rien à ce que tu m'expliques gentiment, parce que je ne suis pas un expert. Peux-tu me guider en pas à pas, svp? parce que là, je ne suis plus………

Bonjour
Un grand Merci pour tout! Svp, vu que je suis un novice, pouvez-vous m'expliquer comment faire pour aller dans les reglages d'ecrans pour detecter et activer l'ecran supplementaire? Je comence à être perdu dans tous ces réglages….

Bonsoir,

Modèle de vidéoprojecteur: Excelvan EHD11

Version de noyau: TravelMate-7730 4.8.0-53-generic #56~16.04.1-Ubuntu SMP Tue May 16 01:18:56 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux

version de pilote graphique:
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Mobile Intel® GM45 Express Chipset
OpenGL version string: 2.1 Mesa 12.0.6
OpenGL shading language version string: 1.20
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 2.0 Mesa 12.0.6
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 1.0.16
OpenGL ES profile extensions:
Je suis débutant avec linux. Pouvez-vous m'aider,svp?