Forum Linux.gentoo Notes d'install

Posté par  (site web personnel) .
Étiquettes :
0
31
août
2004
Voila, je suis en train de m'installé une Gentoo[1] et pour un premier contacte avec cette distribution j'ai choisi une stage 1, parce que pour démouller c'est plus rigolo.

Machine : Athlon-XP 2000+, carte réseau q-tech à base de Via-RhineIII, SoundBlaster 128 (ensoniq 1371), CM asus A7V333 (Via KT333 + ide/raid Promise 20276), 768Mo de ram, CG asus V8460 (GeForce 4 Ti 4600) Freebox ethernet.

Quelques choix : Kernel 2.6.8.1, Dirvers Nvidia proprio (et pas nv)
Départ du live-cd[2] : install-x86-universal-2004.2.iso
En suivant le manuel, j'ai pas eu de pb pour arriver à un système bootable.

Alors pour le moment mon premier gros pb est lié au USE hardened avec lequel j'ai emergé gcc. En effet un gcc emergé de cette manière entraîne une erreur à l'exécution d'un Xorg (et peut être XFree86) compilé par ce premier :
Duplicate symbol __i686.get_pc_thunk.bx in /usr/X11R6/lib/modules/fop.a:bitmapmod.o
Also defined in /usr/X11R6/lib/modules/fonts/libbitmap.a
J'ai donc recompilé gcc sans ce USE et la il s'exécute mais il y a encore quelques autres problèmes de configuration. De plus j'ai une nouvelle erreur "C compiler cannot create executables" notamment à l'emerge"ment" de openoffice.
Bon, j'ai revu les CFLAGS parce que c'est une des hypothèses du pb que j'ai trouvé et j'ai retouché à mes USE, vérifié que ces derniers étaient bien prix en comptes.
(Je vous passe les `emerge -v -p world |more` histoire de voire les USE utilisables qui ne sont ni sur le site Gentoo[3] ni dans le fichier /usr/portage/profiles/use.desc)
Ceci suivi d'un `emerge --unmerge` de différent paquets non vitaux pour le système puis `emerge --depclean` et enfin un `emerge --emptytree world`
Xorg fonctionne bien désormais, j'attaque les emerge"ment" supplémentaires ce soir (entre autre openoffice, gnome, openssh, mozilla, xmms, k3b...)

Il est a noté que l'utilisation conjointe des USE jave et doc entraîne l'installation de la javadoc (1.4.2 et/ou 1.4.1) qu'il est nécessaire de télécharger chez sun a la mano et de mettre dans /usr/portage/distfiles ('chown root:portage' peut alors s'avérer utile).

NB : Je mettrais mon /etc/make.conf en commentaire plus tard
NB : Je mettrais aussi mon .config du kernel histoire de...
NB : Il parait que ne pas jouer avec les USE et les CFLAGS évite ce genre de problème mais c'est pas drôle.
NB : Si qqun sait comment faire cohabiter le USE hardened et Xorg je suis preneur

[1] http://www.gentoo.org/(...)
[2] http://www.gentoo.org/main/en/mirrors.xml(...)
[3] http://www.gentoo.org/dyn/use-index.xml(...)

  • # Le make.conf

    Posté par  (site web personnel) . Évalué à 1.

    # Certaines options USE sont de pures inventions (enfin elle sortent directe du /proc/cpuinfo et n'existe certainement pas)
    # These settings were set by the catalyst build script that automatically built this stage
    # Please consult /etc/make.conf.example for a more detailed example
    CFLAGS="-O3 -march=athlon-xp -pipe -fomit-frame-pointer -mmmx -msse -m3dnow"
    CHOST="i686-pc-linux-gnu"
    CXXFLAGS="${CFLAGS}"
    MAKEOPTS="-j2"
    USE="3dnow 3dnowext \
    apic acpi alsa avi aspell \
    bzlib \
    cdr chroot cx8 crypt cmov \
    divx4linux de dvd dvdr \
    encode exif \
    fxsr fastcgi fpu flac \
    gif gnome gtk gtk2 gcj \
    imagemagick \
    jabber joystick jpeg \
    mplayer mad mce msr mmxext mtrr mca mbox memlimit mmx motif mozilla mpeg \
    ncurses nptl \
    objc oggvorbis opengl \
    pcntl pae pse pge pat pse36 pda pdflib pic png posix postgres ppds \
    quicktime \
    recode ruby \
    sse syscall spell sep sasl speex ssl svga sysvipc szip \
    tcpd tsc tetex theora tiff truetype \
    videos vme \
    wmf wxwindows \
    X xml2 xmms xpm xsl xv xvid \
    zlib \
    -arts -apm -kde -qt -cups"

  • # le .config (i.e. pour le kernel)

    Posté par  (site web personnel) . Évalué à 0.

    J'ai laissé les parties choisies et celles ou je doute.
    #
    # Automatically generated make config: don't edit
    #
    CONFIG_X86=y
    CONFIG_MMU=y
    CONFIG_UID16=y
    CONFIG_GENERIC_ISA_DMA=y

    #
    # Code maturity level options
    #
    CONFIG_EXPERIMENTAL=y
    CONFIG_CLEAN_COMPILE=y

    #
    # General setup
    #
    CONFIG_SWAP=y
    CONFIG_SYSVIPC=y
    CONFIG_POSIX_MQUEUE=y
    CONFIG_BSD_PROCESS_ACCT=y
    # CONFIG_BSD_PROCESS_ACCT_V3 is not set
    CONFIG_SYSCTL=y
    CONFIG_AUDIT=y
    CONFIG_AUDITSYSCALL=y
    CONFIG_LOG_BUF_SHIFT=15
    CONFIG_HOTPLUG=y
    # CONFIG_IKCONFIG is not set
    # CONFIG_EMBEDDED is not set
    CONFIG_KALLSYMS=y
    # CONFIG_KALLSYMS_EXTRA_PASS is not set
    CONFIG_FUTEX=y
    CONFIG_EPOLL=y
    CONFIG_IOSCHED_NOOP=y
    CONFIG_IOSCHED_AS=y
    CONFIG_IOSCHED_DEADLINE=y
    CONFIG_IOSCHED_CFQ=y
    # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

    #
    # Loadable module support
    #
    CONFIG_MODULES=y
    CONFIG_MODULE_UNLOAD=y
    # CONFIG_MODULE_FORCE_UNLOAD is not set
    CONFIG_OBSOLETE_MODPARM=y
    # CONFIG_MODVERSIONS is not set
    CONFIG_KMOD=y
    CONFIG_STOP_MACHINE=y

    #
    # Processor type and features
    #
    CONFIG_X86_PC=y
    # CONFIG_X86_ELAN is not set
    # CONFIG_X86_VOYAGER is not set
    # CONFIG_X86_NUMAQ is not set
    # CONFIG_X86_SUMMIT is not set
    # CONFIG_X86_BIGSMP is not set
    # CONFIG_X86_VISWS is not set
    # CONFIG_X86_GENERICARCH is not set
    # CONFIG_X86_ES7000 is not set
    # CONFIG_M686 is not set
    CONFIG_MK7=y
    # CONFIG_X86_GENERIC is not set
    CONFIG_X86_CMPXCHG=y
    CONFIG_X86_XADD=y
    CONFIG_X86_L1_CACHE_SHIFT=6
    CONFIG_RWSEM_XCHGADD_ALGORITHM=y
    CONFIG_X86_WP_WORKS_OK=y
    CONFIG_X86_INVLPG=y
    CONFIG_X86_BSWAP=y
    CONFIG_X86_POPAD_OK=y
    CONFIG_X86_GOOD_APIC=y
    CONFIG_X86_INTEL_USERCOPY=y
    CONFIG_X86_USE_PPRO_CHECKSUM=y
    CONFIG_X86_USE_3DNOW=y
    CONFIG_HPET_TIMER=y
    CONFIG_SMP=y
    CONFIG_NR_CPUS=8
    CONFIG_SCHED_SMT=y
    CONFIG_PREEMPT=y
    CONFIG_X86_LOCAL_APIC=y
    CONFIG_X86_IO_APIC=y
    CONFIG_X86_TSC=y
    CONFIG_X86_MCE=y
    CONFIG_X86_MCE_NONFATAL=y
    CONFIG_X86_MCE_P4THERMAL=y
    # CONFIG_MICROCODE is not set
    # CONFIG_X86_MSR is not set
    # CONFIG_X86_CPUID is not set

    #
    # Firmware Drivers
    #
    # CONFIG_EDD is not set
    # CONFIG_NOHIGHMEM is not set
    CONFIG_HIGHMEM4G=y
    # CONFIG_HIGHMEM64G is not set
    CONFIG_HIGHMEM=y
    # CONFIG_HIGHPTE is not set
    # CONFIG_MATH_EMULATION is not set
    CONFIG_MTRR=y
    # CONFIG_EFI is not set
    CONFIG_IRQBALANCE=y
    CONFIG_HAVE_DEC_LOCK=y
    # CONFIG_REGPARM is not set

    #
    # Power management options (ACPI, APM)
    #
    CONFIG_PM=y
    CONFIG_SOFTWARE_SUSPEND=y
    # CONFIG_PM_DISK is not set

    #
    # ACPI (Advanced Configuration and Power Interface) Support
    #
    CONFIG_ACPI=y
    CONFIG_ACPI_BOOT=y
    CONFIG_ACPI_INTERPRETER=y
    CONFIG_ACPI_SLEEP=y
    CONFIG_ACPI_SLEEP_PROC_FS=y
    CONFIG_ACPI_AC=y
    CONFIG_ACPI_BATTERY=y
    CONFIG_ACPI_BUTTON=y
    CONFIG_ACPI_FAN=y
    CONFIG_ACPI_PROCESSOR=y
    CONFIG_ACPI_THERMAL=y
    CONFIG_ACPI_BUS=y
    CONFIG_ACPI_EC=y
    CONFIG_ACPI_POWER=y
    CONFIG_ACPI_PCI=y
    CONFIG_ACPI_SYSTEM=y
    # CONFIG_X86_PM_TIMER is not set

    #
    # CPU Frequency scaling
    #
    # CONFIG_CPU_FREQ is not set

    #
    # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
    #
    CONFIG_PCI=y
    # CONFIG_PCI_GOBIOS is not set
    # CONFIG_PCI_GOMMCONFIG is not set
    # CONFIG_PCI_GODIRECT is not set
    CONFIG_PCI_GOANY=y
    CONFIG_PCI_BIOS=y
    CONFIG_PCI_DIRECT=y
    CONFIG_PCI_MMCONFIG=y
    # CONFIG_PCI_MSI is not set
    CONFIG_PCI_LEGACY_PROC=y
    CONFIG_PCI_NAMES=y

    #
    # PCI Hotplug Support
    #
    # CONFIG_HOTPLUG_PCI is not set

    #
    # Executable file formats
    #
    CONFIG_BINFMT_ELF=y
    CONFIG_BINFMT_AOUT=y
    CONFIG_BINFMT_MISC=y

    #
    # Device Drivers
    #

    #
    # Generic Driver Options
    #
    CONFIG_STANDALONE=y
    CONFIG_PREVENT_FIRMWARE_BUILD=y
    CONFIG_FW_LOADER=m

    #
    # Parallel port support
    #
    CONFIG_PARPORT=y
    CONFIG_PARPORT_PC=y
    CONFIG_PARPORT_PC_CML1=y
    # CONFIG_PARPORT_SERIAL is not set
    # CONFIG_PARPORT_PC_FIFO is not set
    # CONFIG_PARPORT_PC_SUPERIO is not set
    # CONFIG_PARPORT_OTHER is not set
    # CONFIG_PARPORT_1284 is not set

    #
    # Plug and Play support
    #

    #
    # Block devices
    #
    CONFIG_BLK_DEV_FD=y
    # CONFIG_PARIDE is not set
    # CONFIG_BLK_CPQ_DA is not set
    # CONFIG_BLK_CPQ_CISS_DA is not set
    # CONFIG_BLK_DEV_DAC960 is not set
    # CONFIG_BLK_DEV_UMEM is not set
    CONFIG_BLK_DEV_LOOP=m
    CONFIG_BLK_DEV_CRYPTOLOOP=m
    # CONFIG_BLK_DEV_NBD is not set
    # CONFIG_BLK_DEV_SX8 is not set
    # CONFIG_BLK_DEV_RAM is not set
    CONFIG_LBD=y

    #
    # ATA/ATAPI/MFM/RLL support
    #
    CONFIG_IDE=y
    CONFIG_BLK_DEV_IDE=y

    #
    # Please see Documentation/ide.txt for help/info on IDE drives
    #
    # CONFIG_BLK_DEV_HD_IDE is not set
    CONFIG_BLK_DEV_IDEDISK=y
    CONFIG_IDEDISK_MULTI_MODE=y
    CONFIG_BLK_DEV_IDECD=y
    CONFIG_BLK_DEV_IDEFLOPPY=y
    CONFIG_BLK_DEV_IDEFLOPPY=y
    # CONFIG_IDE_TASK_IOCTL is not set
    CONFIG_IDE_TASKFILE_IO=y

    #
    # IDE chipset support/bugfixes
    #
    CONFIG_IDE_GENERIC=y
    CONFIG_BLK_DEV_IDEPCI=y
    CONFIG_IDEPCI_SHARE_IRQ=y
    CONFIG_BLK_DEV_GENERIC=y
    CONFIG_BLK_DEV_IDEDMA_PCI=y
    # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
    CONFIG_IDEDMA_PCI_AUTO=y
    # CONFIG_IDEDMA_ONLYDISK is not set
    CONFIG_BLK_DEV_ADMA=y
    CONFIG_BLK_DEV_PDC202XX_NEW=y
    CONFIG_PDC202XX_FORCE=y
    CONFIG_BLK_DEV_VIA82CXXX=y
    CONFIG_BLK_DEV_IDEDMA=y
    # CONFIG_IDEDMA_IVB is not set
    CONFIG_IDEDMA_AUTO=y
    # CONFIG_BLK_DEV_HD is not set

    #
    # SCSI device support
    #
    CONFIG_SCSI=y
    CONFIG_SCSI_PROC_FS=y

    #
    # SCSI support type (disk, tape, CD-ROM)
    #
    CONFIG_BLK_DEV_SD=m
    CONFIG_CHR_DEV_SG=m

    #
    # SCSI low-level drivers
    #
    CONFIG_SCSI_DPT_I2O=m
    CONFIG_SCSI_IPR=m
    CONFIG_SCSI_QLA2XXX=y

    #
    # IEEE 1394 (FireWire) support
    #
    CONFIG_IEEE1394=m

    #
    # Device Drivers
    #
    CONFIG_IEEE1394_OHCI1394=m

    #
    # Protocol Drivers
    #
    CONFIG_IEEE1394_VIDEO1394=m
    # CONFIG_IEEE1394_SBP2 is not set
    # CONFIG_IEEE1394_ETH1394 is not set
    CONFIG_IEEE1394_DV1394=m
    CONFIG_IEEE1394_RAWIO=m
    CONFIG_IEEE1394_CMP=m
    CONFIG_IEEE1394_AMDTP=m

    #
    # Networking support
    #
    CONFIG_NET=y

    #
    # Networking options
    #
    CONFIG_PACKET=y
    # CONFIG_PACKET_MMAP is not set
    # CONFIG_NETLINK_DEV is not set
    CONFIG_UNIX=y
    # CONFIG_NET_KEY is not set
    CONFIG_INET=y
    # CONFIG_IP_MULTICAST is not set
    # CONFIG_IP_ADVANCED_ROUTER is not set
    # CONFIG_IP_PNP is not set
    # CONFIG_NET_IPIP is not set
    # CONFIG_NET_IPGRE is not set
    # CONFIG_ARPD is not set
    # CONFIG_SYN_COOKIES is not set
    # CONFIG_INET_AH is not set
    # CONFIG_INET_ESP is not set
    # CONFIG_INET_IPCOMP is not set

    #
    # IP: Virtual Server Configuration
    #
    CONFIG_NETFILTER=y


    #
    # IP: Netfilter Configuration
    #
    CONFIG_IP_NF_CONNTRACK=y
    CONFIG_IP_NF_FTP=m
    CONFIG_IP_NF_IRC=m
    # CONFIG_IP_NF_TFTP is not set
    # CONFIG_IP_NF_AMANDA is not set
    CONFIG_IP_NF_QUEUE=y
    CONFIG_IP_NF_IPTABLES=y
    CONFIG_IP_NF_MATCH_LIMIT=y
    CONFIG_IP_NF_MATCH_IPRANGE=y
    CONFIG_IP_NF_MATCH_MAC=y
    CONFIG_IP_NF_MATCH_PKTTYPE=y
    CONFIG_IP_NF_MATCH_MARK=y
    CONFIG_IP_NF_MATCH_MULTIPORT=y
    CONFIG_IP_NF_MATCH_TOS=y
    CONFIG_IP_NF_MATCH_RECENT=y
    CONFIG_IP_NF_MATCH_ECN=y
    CONFIG_IP_NF_MATCH_DSCP=y
    CONFIG_IP_NF_MATCH_AH_ESP=y
    CONFIG_IP_NF_MATCH_LENGTH=y
    CONFIG_IP_NF_MATCH_TTL=y
    CONFIG_IP_NF_MATCH_TCPMSS=y
    CONFIG_IP_NF_MATCH_HELPER=y
    CONFIG_IP_NF_MATCH_STATE=y
    CONFIG_IP_NF_MATCH_CONNTRACK=y
    CONFIG_IP_NF_MATCH_OWNER=y
    CONFIG_IP_NF_FILTER=y
    CONFIG_IP_NF_TARGET_REJECT=y
    CONFIG_IP_NF_NAT=y
    CONFIG_IP_NF_NAT_NEEDED=y
    CONFIG_IP_NF_TARGET_MASQUERADE=y
    CONFIG_IP_NF_TARGET_REDIRECT=y
    CONFIG_IP_NF_TARGET_NETMAP=y
    CONFIG_IP_NF_TARGET_SAME=y
    # CONFIG_IP_NF_NAT_LOCAL is not set
    # CONFIG_IP_NF_NAT_SNMP_BASIC is not set
    CONFIG_IP_NF_NAT_IRC=m
    CONFIG_IP_NF_NAT_FTP=m
    CONFIG_IP_NF_MANGLE=y
    CONFIG_IP_NF_TARGET_TOS=y
    CONFIG_IP_NF_TARGET_ECN=y
    CONFIG_IP_NF_TARGET_DSCP=y
    CONFIG_IP_NF_TARGET_MARK=y
    CONFIG_IP_NF_TARGET_CLASSIFY=y
    CONFIG_IP_NF_TARGET_LOG=y
    CONFIG_IP_NF_TARGET_ULOG=y
    CONFIG_IP_NF_TARGET_TCPMSS=y
    CONFIG_IP_NF_ARPTABLES=y
    CONFIG_IP_NF_ARPFILTER=y
    CONFIG_IP_NF_ARP_MANGLE=y
    CONFIG_IP_NF_TARGET_NOTRACK=m
    CONFIG_IP_NF_RAW=m
    # CONFIG_IP_NF_MATCH_ADDRTYPE is not set
    # CONFIG_IP_NF_MATCH_REALM is not set

    #
    # Network testing
    #
    CONFIG_IRDA=m

    #
    # IrDA protocols
    #
    CONFIG_IRLAN=m
    # CONFIG_IRNET is not set
    CONFIG_IRCOMM=m
    CONFIG_IRDA_ULTRA=y

    #
    # IrDA options
    #
    CONFIG_IRDA_CACHE_LAST_LSAP=y
    CONFIG_IRDA_FAST_RR=y

    #
    # Infrared-port device drivers
    #

    #
    # SIR device drivers
    #
    CONFIG_IRTTY_SIR=m

    #
    # Old Serial dongle support
    #
    #
    # FIR device drivers
    #
    CONFIG_NETDEVICES=y
    CONFIG_DUMMY=m

    #
    # Ethernet (10 or 100Mbit)
    #
    CONFIG_NET_ETHERNET=y
    CONFIG_MII=y
    # CONFIG_HAPPYMEAL is not set
    # CONFIG_SUNGEM is not set
    # CONFIG_NET_VENDOR_3COM is not set

    #
    # Tulip family network device support
    #
    CONFIG_NET_PCI=y
    CONFIG_VIA_RHINE=y
    CONFIG_VIA_RHINE_MMIO=y
    # CONFIG_VIA_VELOCITY is not set

    #
    # Wan interfaces
    #
    # CONFIG_WAN is not set
    CONFIG_PPP=m
    # CONFIG_PPP_MULTILINK is not set
    CONFIG_PPP_FILTER=y
    CONFIG_PPP_ASYNC=m
    CONFIG_PPP_SYNC_TTY=m
    # CONFIG_PPP_DEFLATE is not set
    # CONFIG_PPP_BSDCOMP is not set
    CONFIG_PPPOE=m
    # CONFIG_NET_FC is not set
    # CONFIG_SHAPER is not set
    # CONFIG_NETCONSOLE is not set

    #
    # Input device support
    #
    CONFIG_INPUT=y

    #
    # Userland interfaces
    #
    CONFIG_INPUT_MOUSEDEV=y
    CONFIG_INPUT_MOUSEDEV_PSAUX=y
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    CONFIG_INPUT_JOYDEV=m

    #
    # Input I/O drivers
    #
    CONFIG_SOUND_GAMEPORT=y
    CONFIG_SERIO=y
    CONFIG_SERIO_I8042=y

    #
    # Input Device Drivers
    #
    CONFIG_INPUT_KEYBOARD=y
    CONFIG_KEYBOARD_ATKBD=y
    CONFIG_INPUT_MOUSE=y
    CONFIG_MOUSE_PS2=y
    CONFIG_INPUT_JOYSTICK=y
    # CONFIG_JOYSTICK_IFORCE is not set
    CONFIG_JOYSTICK_WARRIOR=m
    CONFIG_INPUT_JOYDUMP=m

    #
    # Character devices
    #
    CONFIG_VT=y
    CONFIG_VT_CONSOLE=y
    CONFIG_HW_CONSOLE=y

    #
    # Serial drivers
    #
    CONFIG_SERIAL_8250=y
    # CONFIG_SERIAL_8250_CONSOLE is not set
    # CONFIG_SERIAL_8250_ACPI is not set
    CONFIG_SERIAL_8250_NR_UARTS=4
    # CONFIG_SERIAL_8250_EXTENDED is not set

    #
    # Non-8250 serial port support
    #
    CONFIG_SERIAL_CORE=y
    CONFIG_UNIX98_PTYS=y
    CONFIG_LEGACY_PTYS=y
    CONFIG_LEGACY_PTY_COUNT=256
    CONFIG_PRINTER=y

    #
    # I2C support
    #
    CONFIG_I2C=y

    #
    # I2C Algorithms
    #
    CONFIG_I2C_ALGOBIT=y

    #
    # I2C Hardware Bus support
    #
    # CONFIG_I2C_ISA is not set
    # CONFIG_I2C_NFORCE2 is not set
    # CONFIG_I2C_VIA is not set
    # CONFIG_I2C_VIAPRO is not set

    #
    # Hardware Sensors Chip support
    #
    # CONFIG_I2C_SENSOR is not set
    # CONFIG_SENSORS_ADM1021 is not set
    # CONFIG_SENSORS_ADM1025 is not set
    # CONFIG_SENSORS_ADM1031 is not set
    # CONFIG_SENSORS_ASB100 is not set
    # CONFIG_SENSORS_DS1621 is not set
    # CONFIG_SENSORS_FSCHER is not set
    # CONFIG_SENSORS_GL518SM is not set
    # CONFIG_SENSORS_IT87 is not set
    # CONFIG_SENSORS_LM75 is not set
    # CONFIG_SENSORS_LM77 is not set
    # CONFIG_SENSORS_LM78 is not set
    # CONFIG_SENSORS_LM80 is not set
    # CONFIG_SENSORS_LM83 is not set
    # CONFIG_SENSORS_LM85 is not set
    # CONFIG_SENSORS_LM90 is not set
    # CONFIG_SENSORS_MAX1619 is not set
    # CONFIG_SENSORS_VIA686A is not set
    # CONFIG_SENSORS_W83781D is not set
    # CONFIG_SENSORS_W83L785TS is not set
    # CONFIG_SENSORS_W83627HF is not set

    #
    # Other I2C Chip support
    #
    # CONFIG_SENSORS_EEPROM is not set
    # CONFIG_SENSORS_PCF8574 is not set
    # CONFIG_SENSORS_PCF8591 is not set
    # CONFIG_SENSORS_RTC8564 is not set
    # CONFIG_I2C_DEBUG_CORE is not set
    # CONFIG_I2C_DEBUG_ALGO is not set
    # CONFIG_I2C_DEBUG_BUS is not set
    # CONFIG_I2C_DEBUG_CHIP is not set

    #
    # Graphics support
    #
    CONFIG_FB=y
    CONFIG_FB_VGA16=m
    CONFIG_FB_VESA=y
    CONFIG_VIDEO_SELECT=y
    CONFIG_FB_RIVA=y
    CONFIG_FB_RIVA_I2C=y

    #
    # Console display driver support
    #
    CONFIG_VGA_CONSOLE=y
    # CONFIG_MDA_CONSOLE is not set
    CONFIG_DUMMY_CONSOLE=y
    CONFIG_FRAMEBUFFER_CONSOLE=m
    # CONFIG_FONTS is not set
    CONFIG_FONT_8x8=y
    CONFIG_FONT_8x16=y

    #
    # Logo configuration
    #
    CONFIG_LOGO=y
    CONFIG_LOGO_LINUX_MONO=y
    CONFIG_LOGO_LINUX_VGA16=y
    CONFIG_LOGO_LINUX_CLUT224=y

    #
    # Sound
    #
    CONFIG_SOUND=y

    #
    # Advanced Linux Sound Architecture
    #
    CONFIG_SND=y
    CONFIG_SND_TIMER=y
    CONFIG_SND_PCM=y
    CONFIG_SND_HWDEP=m
    CONFIG_SND_RAWMIDI=y
    CONFIG_SND_SEQUENCER=y
    CONFIG_SND_SEQ_DUMMY=m
    # CONFIG_SND_MIXER_OSS is not set
    # CONFIG_SND_PCM_OSS is not set
    # CONFIG_SND_SEQUENCER_OSS is not set
    # CONFIG_SND_VERBOSE_PRINTK is not set

    #
    # Generic devices
    #
    CONFIG_SND_MPU401_UART=m
    CONFIG_SND_DUMMY=m
    CONFIG_SND_MPU401=m

    #
    # PCI devices
    #
    CONFIG_SND_AC97_CODEC=y
    CONFIG_SND_EMU10K1=m
    CONFIG_SND_ENS1370=m
    CONFIG_SND_ENS1371=y

    #
    # USB support
    #
    CONFIG_USB=y

    #
    # Miscellaneous USB options
    #
    CONFIG_USB_DEVICEFS=y

    #
    # USB Host Controller Drivers
    #
    CONFIG_USB_EHCI_HCD=y
    # CONFIG_USB_EHCI_SPLIT_ISO is not set
    # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
    # CONFIG_USB_OHCI_HCD is not set
    CONFIG_USB_UHCI_HCD=y

    #
    # USB Device Class drivers
    #
    CONFIG_USB_ACM=m
    CONFIG_USB_PRINTER=m
    CONFIG_USB_STORAGE=m

    #
    # USB Human Interface Devices (HID)
    #
    CONFIG_USB_HID=m
    CONFIG_USB_HIDINPUT=y

    #
    # File systems
    #
    CONFIG_EXT2_FS=y
    # CONFIG_EXT2_FS_XATTR is not set
    CONFIG_EXT3_FS=y
    CONFIG_EXT3_FS_XATTR=y
    CONFIG_EXT3_FS_POSIX_ACL=y
    CONFIG_EXT3_FS_SECURITY=y
    CONFIG_JBD=y
    CONFIG_FS_MBCACHE=y
    CONFIG_FS_POSIX_ACL=y
    CONFIG_AUTOFS4_FS=y

    #
    # CD-ROM/DVD Filesystems
    #
    CONFIG_ISO9660_FS=y
    CONFIG_JOLIET=y
    CONFIG_UDF_FS=y
    CONFIG_UDF_NLS=y

    #
    # DOS/FAT/NT Filesystems
    #
    CONFIG_FAT_FS=y
    CONFIG_MSDOS_FS=y
    CONFIG_VFAT_FS=y
    CONFIG_FAT_DEFAULT_CODEPAGE=437
    CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
    CONFIG_NTFS_FS=m

    #
    # Pseudo filesystems
    #
    CONFIG_PROC_FS=y
    CONFIG_PROC_KCORE=y
    CONFIG_SYSFS=y
    CONFIG_DEVFS_FS=y
    CONFIG_DEVFS_MOUNT=y
    CONFIG_DEVPTS_FS_XATTR=y
    CONFIG_TMPFS=y
    CONFIG_RAMFS=y

    #
    # Network File Systems
    #
    CONFIG_SMB_FS=m
    # CONFIG_SMB_NLS_DEFAULT is not set

    #
    # Partition Types
    #
    CONFIG_PARTITION_ADVANCED=y
    CONFIG_MSDOS_PARTITION=y
    CONFIG_BSD_DISKLABEL=y
    CONFIG_SOLARIS_X86_PARTITION=y
    CONFIG_UNIXWARE_DISKLABEL=y
    CONFIG_LDM_PARTITION=y
    CONFIG_LDM_DEBUG=y

    #
    # Native Language Support
    #
    CONFIG_NLS=y
    CONFIG_NLS_DEFAULT="iso8859-15"
    CONFIG_NLS_CODEPAGE_437=y
    CONFIG_NLS_CODEPAGE_850=y
    CONFIG_NLS_ISO8859_1=m
    # CONFIG_NLS_ISO8859_9 is not set
    CONFIG_NLS_ISO8859_15=y
    CONFIG_NLS_UTF8=m

    #
    # Profiling support
    #
    CONFIG_PROFILING=y
    CONFIG_OPROFILE=y

    #
    # Kernel hacking
    #
    # CONFIG_DEBUG_KERNEL is not set
    CONFIG_EARLY_PRINTK=y
    # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
    # CONFIG_FRAME_POINTER is not set
    # CONFIG_4KSTACKS is not set
    CONFIG_X86_FIND_SMP_CONFIG=y
    CONFIG_X86_MPPARSE=y

    #
    # Security options
    #
    CONFIG_SECURITY=y
    # CONFIG_SECURITY_NETWORK is not set
    CONFIG_SECURITY_CAPABILITIES=y
    # CONFIG_SECURITY_ROOTPLUG is not set
    # CONFIG_SECURITY_SELINUX is not set

    #
    # Cryptographic options
    #
    CONFIG_CRYPTO=y
    CONFIG_CRYPTO_HMAC=y
    CONFIG_CRYPTO_NULL=m
    CONFIG_CRYPTO_MD4=m
    CONFIG_CRYPTO_MD5=m
    CONFIG_CRYPTO_SHA1=m
    CONFIG_CRYPTO_SHA256=m
    CONFIG_CRYPTO_SHA512=m
    CONFIG_CRYPTO_DES=m
    CONFIG_CRYPTO_BLOWFISH=m
    CONFIG_CRYPTO_TWOFISH=m
    CONFIG_CRYPTO_SERPENT=m
    CONFIG_CRYPTO_AES_586=m
    CONFIG_CRYPTO_CAST5=m
    CONFIG_CRYPTO_CAST6=m
    CONFIG_CRYPTO_TEA=m
    CONFIG_CRYPTO_ARC4=m
    CONFIG_CRYPTO_KHAZAD=m
    CONFIG_CRYPTO_DEFLATE=m
    CONFIG_CRYPTO_MICHAEL_MIC=m
    CONFIG_CRYPTO_CRC32C=m


    #
    # Library routines
    #
    CONFIG_CRC_CCITT=m
    CONFIG_CRC32=y
    CONFIG_LIBCRC32C=m
    CONFIG_ZLIB_INFLATE=m
    CONFIG_ZLIB_DEFLATE=m
    CONFIG_X86_SMP=y
    CONFIG_X86_HT=y
    CONFIG_X86_BIOS_REBOOT=y
    CONFIG_X86_TRAMPOLINE=y
    CONFIG_PC=y

  • # etc-update

    Posté par  (site web personnel) . Évalué à 1.

    Attention aux reponses données à `etc-update` notament apres un `emerge --emptytree world`. En effet j'ai vu mon /etc/fstab reinitialisé ainsi que le /etc/rc.conf à la suite de cette combinaison de commande et de réponses un peu rapides au petit matin.

  • # Absence de startx et autres executables de X apès la compil de Xorg...

    Posté par  (site web personnel) . Évalué à 1.

    Et bien c'est pas tout à fait vrai, c'est juste qu'ils sont pas dans le path, moralité, mieux vaut ce reveiller que de recompiler...

  • # OOo

    Posté par  (site web personnel) . Évalué à 1.

    Compilation d'OOo reussi (a premiere vue).

    J'ai effectué la compilation d'OOo avec les CFLAGS et les USE indiqués plus haut, la JVM Sun 1.4.2 et la variable d'environement "export FORCE_JAVA=yes". L'executable se lance pour le moment sans probleme, mais n'ayant pas encore tester l'utilisation plus en avant je ne sais pas si c'est tout parfait.

    Je rappelle qu'au moment de la compilation on a le droit à un (environ) "ebuild d'OOo est testé uniquement avec blackdown JVM" et "Attention OOo est tres sensible aux CFLAGS utilisés"

Suivre le flux des commentaires

Note : les commentaires appartiennent à celles et ceux qui les ont postés. Nous n’en sommes pas responsables.