Forum Linux.mandriva Hauppauge wintv ministick HD

Bonjour,

J'ai un problème pour utiliser ma carte TNT USB "Hauppauge wintv ministick HD":

dmesg donne :

usb 8-2: new high speed USB device using ehci_hcd and address 6
usb 8-2: New USB device found, idVendor=2040, idProduct=c000
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-2: Product: WinTV MiniStick
usb 8-2: Manufacturer: Hauppauge Computer Works
usb 8-2: SerialNumber: 4034274907
smscore_set_device_mode: firmware download success: sms1xxx-hcw-55xxx-dvbt-02.fw
DVB: registering new adapter (Hauppauge WinTV MiniStick)
DVB: registering adapter 0 frontend 0 (Siano Mobile Digital MDTV Receiver)...
sms_ir_init: Allocating rc device
sms_ir_init: IR port 0, timeout 100 ms
sms_ir_init: Input device (IR) SMS IR (Hauppauge WinTV MiniStick) is set for key events
Registered IR keymap rc-rc5-hauppauge-new
input: SMS IR (Hauppauge WinTV MiniStick) as /devices/pci0000:00/0000:00:1d.7/usb8/8-2/rc/rc2/input14
rc2: SMS IR (Hauppauge WinTV MiniStick) as /devices/pci0000:00/0000:00:1d.7/usb8/8-2/rc/rc2
rc rc2: lirc_dev: driver ir-lirc-codec (smsmdtv) registered at minor = 0

La carte est bien détecté par kaffeine ou autre mais lorsque je lance le scan:

[jonathan@localhost ~]$ kaffeine
kaffeine(9789) DvbManager::loadDeviceManager: using built-in dvb device manager
kaffeine(9789) DvbLinuxDevice::startDevice: found dvb device "" / "Siano Mobile Digital MDTV Receiver"
[jonathan@localhost ~]$ kaffeine(9789) DvbLinuxDevice::getSignal: ioctl FE_READ_SIGNAL_STRENGTH failed for frontend "/dev/dvb/adapter0/frontend0"
kaffeine(9789) DvbLinuxDevice::getSnr: ioctl FE_READ_SNR failed for frontend "/dev/dvb/adapter0/frontend0"
kaffeine(9789) DvbDevice::frontendEvent: tuning failed

Un "scan -c"

[jonathan@localhost ~]$ scan -c
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
start_filter:1361: ERROR: ioctl DMX_SET_FILTER failed: 110 Connection timed out
start_filter:1361: ERROR: ioctl DMX_SET_FILTER failed: 110 Connection timed out
^CERROR: interrupted by SIGINT, dumping partial result...
dumping lists (0 services)
Done.

"lsusb -v -d 2040:c000" à du mal aussi sur la carte TV:

Bus 008 Device 005: ID 2040:c000 Hauppauge Windham
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x2040 Hauppauge
  idProduct          0xc000 Windham
  bcdDevice            0.01
  iManufacturer           1
  iProduct                2
  iSerial                 3
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
can't get device qualifier: Connection timed out
can't get debug descriptor: Connection timed out
cannot read device status, Connection timed out (110)

D'où celà peut t'il venir?

Merci pour votre aide