D'abord ma config plus detaillee:
[root@localhost ~]# lspci -v
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
Subsystem: ASUSTeK Computer Inc.: Unknown device 1977
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] #09 [2109]
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 04) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: faa00000-feafffff
Prefetchable memory behind bridge: bfe00000-dfefffff
Capabilities: [88] #0d [0000]
Capabilities: [80] Power Management version 2
Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [a0] #10 [0141]
00:1b.0 Class 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
Subsystem: ASUSTeK Computer Inc.: Unknown device 1173
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at febf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [70] #10 [0091]
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 1177
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at e480 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 1177
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at e800 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 1177
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at e880 [size=32]
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 1177
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at ec00 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 1177
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [20a0]
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fa900000-fa9fffff
Capabilities: [50] #0d [0000]
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc.: Unknown device 1177
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at
I/O ports at
I/O ports at
I/O ports at
I/O ports at ffa0 [size=16]
01:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus)
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 20
Memory at fa9f8000 (32-bit, non-prefetchable) [size=16K]
I/O ports at d800 [size=256]
Expansion ROM at fa9c0000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
01:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
Subsystem: ASUSTeK Computer Inc.: Unknown device 1177
Flags: bus master, medium devsel, latency 168, IRQ 17
Memory at 40000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 40400000-407ff000 (prefetchable)
Memory window 1: 40800000-40bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
16-bit legacy interface ports at 0001
01:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 1177
Flags: bus master, medium devsel, latency 64, IRQ 18
Memory at fa9fe000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
01:01.2 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
Subsystem: ASUSTeK Computer Inc.: Unknown device 1177
Flags: bus master, medium devsel, latency 64, IRQ 6
Memory at fa9fe800 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
01:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08)
Subsystem: ASUSTeK Computer Inc.: Unknown device 1177
Flags: medium devsel, IRQ 6
Memory at fa9fec00 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
01:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05)
Subsystem: Intel Corporation: Unknown device 2701
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at fa9ff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
03:00.0 VGA compatible controller: nVidia Corporation GeForce Go 6200 TurboCache (rev a1) (prog-if 00 [VGA])
Subsystem: ASUSTeK Computer Inc.: Unknown device 188a
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
Expansion ROM at feae0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [78] #10 [0001]
Avec le xorg.conf d'origine (genere par XFDrake) si le LCD est branché au lancement de X j'obtiens bien un affichage simultané mais le LCD est illisible (lignes de couleur plus ou moins aleatoires).
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
Section "ServerFlags"
#DontZap # disable (server abort)
#DontZoom # disable <KP_+>/<KP_-> (resolution switching)
AllowMouseOpenFail # allows the server to start up even if the mouse does not work
EndSection
Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "synaptics"
Load "/usr/X11R6/lib/modules/extensions/nvidia/libglx.so"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "compose:rwin"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "6 7"
EndSection
Section "InputDevice"
Identifier "SynapticsMouse1"
Driver "synaptics"
Option "Protocol" "auto-dev"
Option "Device" "/dev/input/mice"
Option "MinSpeed" "0.09"
Option "MaxSpeed" "0.18"
Option "BottomEdge" "4200"
Option "SHMConfig" "on"
Option "FingerLow" "25"
Option "LeftEdge" "1700"
Option "MaxTapMove" "220"
Option "MaxTapTime" "180"
Option "FingerHigh" "30"
Option "VertScrollDelta" "100"
Option "TopEdge" "1700"
Option "AccelFactor" "0.0015"
Option "RightEdge" "5300"
EndSection
Section "Monitor"
Identifier "monitor1"
VendorName "Generic"
ModelName "Flat Panel 1024x768"
HorizSync 31.5-55
VertRefresh 40-70
# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_120" 181.21 1280 1376 1520 1760 800 801 804 858 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_100" 147.89 1280 1376 1512 1744 800 801 804 848 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_85" 123.38 1280 1368 1504 1728 800 801 804 840 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_75" 107.21 1280 1360 1496 1712 800 801 804 835 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_60" 83.46 1280 1344 1480 1680 800 801 804 828 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_50" 68.56 1280 1336 1472 1664 800 801 804 824 -HSync +Vsync
EndSection
Section "Device"
Identifier "device1"
VendorName "nVidia Corp."
BoardName "NVIDIA GeForce FX (generic)"
Driver "nv"
Option "DPMS"
Option "IgnoreEDID" "1"
EndSection
Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Virtual 1280 800
EndSubsection
Subsection "Display"
Depth 15
Virtual 1280 800
EndSubsection
Subsection "Display"
Depth 16
Virtual 1280 800
EndSubsection
Subsection "Display"
Depth 24
Virtual 1280 800
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
InputDevice "SynapticsMouse1" "AlwaysCore"
Screen "screen1"
EndSection
En me coltinant le xorg.conf a la main et en utilisant les drivers proprietaires nvidia, je peux avoir:
- soit l'affichage sur le portable uniquement, si le LCD est debranche au lancement de X
- soit l'affichage sur LCD uniquement, s'il est branche au lancement de X
Section "ServerLayout"
Identifier "layout0"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "SynapticsMouse0" "AlwaysCore"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "unix/:-1"
EndSection
Section "Module"
Load "dbe"
Load "v4l" # Video for Linux
Load "dri"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "type1"
Load "freetype"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "compose:rwin"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "InputDevice"
Identifier "SynapticsMouse0"
Driver "synaptics"
Option "Protocol" "auto-dev"
Option "Device" "/dev/input/mice"
Option "MinSpeed" "0.09"
Option "MaxSpeed" "0.18"
Option "BottomEdge" "4200"
Option "SHMConfig" "on"
Option "FingerLow" "25"
Option "LeftEdge" "1700"
Option "MaxTapMove" "220"
Option "MaxTapTime" "180"
Option "FingerHigh" "30"
Option "VertScrollDelta" "100"
Option "TopEdge" "1700"
Option "AccelFactor" "0.0015"
Option "RightEdge" "5300"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Generic"
ModelName "LCD"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "GeForce Go 6200"
BusID "PCI:3:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Les touches permettant la bascule de l'affichage (Fn+F6 ou Fn+F8) ne resolvent pas le probleme: je perd l'affichage de l'ecran actif sans que l'autre ne prenne le relai. De plus ces touches reagissent TRES lentement (genre 5 minutes), tres penible pour faire des tests et aucune solution sur les forums.
Merci de votre aide.
# .
Posté par other . Évalué à 1.
http://forum.ubuntu-fr.org/viewtopic.php?id=103633
(c'est du ubuntu mais xorg devrais etre le meme) Regarde le dernier xorg.conf du denier post, il a 2 sections "device" (DVI et VGA), 2 section "monitor", et surtout 2 sections screen (avec les 2 device).
Mais je n'ai jamais essayé le dual screen, bon courage.
Suivre le flux des commentaires
Note : les commentaires appartiennent à celles et ceux qui les ont postés. Nous n’en sommes pas responsables.