Forum Linux.debian/ubuntu Lexmark Z11 sous Debian Linux

Posté par  .
Étiquettes :
0
23
août
2004
Bonjour,

Je tente désespérement de faire marche ma Lexmark Z11 sous Linux
(Debian sarge), sans succès jusqu'ici... Je précise que j'ai essayé
avec deux câbles différents, qui marchent à priori.

Au niveau du noyau (2.4.27), j'ai activé PARPORT, PARPORT_PC, LP et
PARPORT_1284 (pour le support ECP+EPP que j'ai activé dans le bios).

Au niveau des paquets, voici ce qui est installé :
ii foomatic-bin 3.0.1-20040506-1 linuxprinting.org
ii foomatic-db 20040705-1 linuxprinting.org
ii foomatic-db-engine 3.0.1-20040506-1 linuxprinting.org
ii foomatic-db-gimp-print 4.2.7-1 linuxprinting.org
ii foomatic-db-hpijs 1.5-20040621-1 linuxprinting.org
ii foomatic-filters 3.0.1-20040621-4 linuxprinting.org
ii foomatic-filters-ppds 20040506-1 linuxprinting.org
ii foo2zjs 20040210-2 Support for printing
ii cupsys 1.1.20final+rc1-3 Common UNIX Printing
ii cupsys-bsd 1.1.20final+rc1-3 Common UNIX Printing
ii cupsys-client 1.1.20final+rc1-3 Common UNIX Printing
ii cupsys-driver-gimpprint 4.2.7-1 Gimp-Print printer
ii cupsys-driver-gimpprint-data 4.2.7-1 Gimp-Print printer
ii libcupsys2 1.1.20final+rc1-3 Common UNIX Printing
ii libcupsys2-gnutls10 1.1.20final+rc1-3 Common UNIX Printing
ii cupsomatic-ppd 20040506-1 linuxprinting.org

L'interface Webmin de CUPS est accessible, j'ai pu configuré mon imprimante.
Mais impossible d'imprimer la page de test. Ça donne :
-----
LexmarkZ11-11 Test Page 15k Abandonné à
-----
«lpr » ne renvoie aucune erreur mais ne fait rien
«cat > /dev/lp0», idem
Rien ne sort ! L'imprimante ne frémit même pas...
J'ai tenté un «fc-cache -f», rien à faire.

J'ai monté LogLevel à debug et vous avez à la fin du message une tentative
complète d'impression trouvée dans /var/log/cups/error_log.

Je remarque plusieurs choses de travers :
-----
D [21/Aug/2004:16:38:01 +0200] [Job 15] perl: warning: Setting locale failed.
D [21/Aug/2004:16:38:01 +0200] [Job 15] perl: warning: Please check that your
locale settings:
D [21/Aug/2004:16:38:01 +0200] [Job 15] LANGUAGE = (unset),
D [21/Aug/2004:16:38:01 +0200] [Job 15] LC_ALL = (unset),
D [21/Aug/2004:16:38:01 +0200] [Job 15] LANG = "fr"
D [21/Aug/2004:16:38:01 +0200] [Job 15] are supported and installed on your
system.
D [21/Aug/2004:16:38:01 +0200] [Job 15] perl: warning: Falling back to the
standard locale ("C").
-----
Pourtant le paquet locales est correctement configuré. J'ai vérifié, c'est
bon...

Il y a surtout ça :
-----
D [21/Aug/2004:16:38:02 +0200] [Job 15] Process dying with "The renderer
command line returned an unrecognized error code 16777215.", exit stat: 1
D [21/Aug/2004:16:38:02 +0200] [Job 15] The renderer command line returned an
unrecognized error code 16777215.
D [21/Aug/2004:16:38:02 +0200] [Job 15] tail process done writing data to
STDOUT
D [21/Aug/2004:16:38:02 +0200] [Job 15] KID4 finished
D [21/Aug/2004:16:38:02 +0200] [Job 15] Renderer process finished
D [21/Aug/2004:16:38:02 +0200] [Job 15] Killing process 3212 (KID3)
D [21/Aug/2004:16:38:02 +0200] [Job 15] Process dying with "Error closing
renderer", exit stat: 1
D [21/Aug/2004:16:38:02 +0200] [Job 15] Error closing renderer
E [21/Aug/2004:16:38:02 +0200] PID 3208 stopped with status 1!
-----
J'ai fait une recherche sur google, apparement c'est une erreur liée à foo2zjs,
pourtant il semble correctement installé chez moi...

Si vous avez la moindre idée, n'hésitez pas... Je suis preneur...
Merci d'avance ;-)

Voici le résultat de quelques commandes en vrac :

-----
aurelien@theodule|~% lpc stat 12:53
LexmarkZ11:
printer is on device 'parallel' speed -1
queuing is enabled
printing is enabled
no entries
-----

-----
aurelien@theodule|~% cat /etc/printcap 13:00
lp|Generic dot-matrix printer entry:\
:lp=/dev/lp0:\
:sd=/var/spool/lpd/lp:\
:af=/var/log/lp-acct:\
:lf=/var/log/lp-errs:\
:pl#66:\
:pw#80:\
:pc#150:\
:mx#0:\
:sh:
-----

  • # Messages dus à une tentative d'impression

    Posté par  . Évalué à 1.

    I [21/Aug/2004:16:37:55 +0200] Listening to 0:631
    D [21/Aug/2004:16:37:55 +0200] AddLocation: added location 'CUPS_INTERNAL_BROWSE_ACL'
    D [21/Aug/2004:16:37:55 +0200] DenyIP: CUPS_INTERNAL_BROWSE_ACL deny 00000000/00000000
    D [21/Aug/2004:16:37:55 +0200] AddLocation: added location '/'
    D [21/Aug/2004:16:37:55 +0200] DenyIP: / deny 00000000/00000000
    D [21/Aug/2004:16:37:55 +0200] AllowIP: / allow 7f000001/ffffffff
    D [21/Aug/2004:16:37:55 +0200] AddLocation: added location '/admin'
    D [21/Aug/2004:16:37:55 +0200] DenyIP: /admin deny 00000000/00000000
    D [21/Aug/2004:16:37:55 +0200] AllowIP: /admin allow 7f000001/ffffffff
    I [21/Aug/2004:16:37:55 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
    I [21/Aug/2004:16:37:55 +0200] Configured for up to 100 clients.
    I [21/Aug/2004:16:37:55 +0200] Allowing up to 100 client connections per host.
    I [21/Aug/2004:16:37:55 +0200] Full reload is required.
    D [21/Aug/2004:16:37:55 +0200] LoadAllPrinters: Loading printer LexmarkZ11...
    D [21/Aug/2004:16:37:55 +0200] LoadDevices: Added device "parallel:/dev/lp0"...
    D [21/Aug/2004:16:37:55 +0200] LoadDevices: Added device "ipp"...
    D [21/Aug/2004:16:37:55 +0200] LoadDevices: Added device "lpd"...
    D [21/Aug/2004:16:37:55 +0200] LoadDevices: Added device "socket"...
    D [21/Aug/2004:16:37:55 +0200] LoadDevices: Added device "http"...
    D [21/Aug/2004:16:37:55 +0200] LoadDevices: Added device "canon:/dev/lp0"...
    D [21/Aug/2004:16:37:55 +0200] LoadDevices: Added device "epson:/dev/lp0"...
    D [21/Aug/2004:16:37:55 +0200] LoadDevices: Added device "ptal"...
    I [21/Aug/2004:16:37:55 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 2312 PPDs...
    I [21/Aug/2004:16:37:56 +0200] LoadPPDs: No new or changed PPDs...
    D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Scanning /var/spool/cups...
    D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading attributes for job 1...
    D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading attributes for job 2...
    D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading attributes for job 3...
    D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading attributes for job 4...
    D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading attributes for job 5...
    D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading attributes for job 6...
    D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading attributes for job 7...
    D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading attributes for job 8...
    D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading attributes for job 9...
    D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading attributes for job 10...
    D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading attributes for job 11...
    D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading attributes for job 12...
    D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading attributes for job 13...
    D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading attributes for job 14...
    I [21/Aug/2004:16:37:56 +0200] Full reload complete.
    D [21/Aug/2004:16:37:56 +0200] StartListening: NumListeners=1
    D [21/Aug/2004:16:37:56 +0200] StartListening: address=00000000 port=631
    D [21/Aug/2004:16:37:56 +0200] ResumeListening: setting input bits...
    D [21/Aug/2004:16:37:58 +0200] AcceptClient: 4 from localhost:631.
    D [21/Aug/2004:16:37:58 +0200] ReadClient: 4 GET /printers HTTP/1.1
    D [21/Aug/2004:16:37:58 +0200] CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 3204
    I [21/Aug/2004:16:37:58 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=3204)
    D [21/Aug/2004:16:37:58 +0200] SendCommand: 4 file=6
    D [21/Aug/2004:16:37:59 +0200] AcceptClient: 7 from localhost:631.
    D [21/Aug/2004:16:37:59 +0200] ReadClient: 7 POST / HTTP/1.1
    D [21/Aug/2004:16:37:59 +0200] ProcessIPPRequest: 7 status_code=1
    D [21/Aug/2004:16:37:59 +0200] ReadClient: 7 POST / HTTP/1.1
    D [21/Aug/2004:16:37:59 +0200] ProcessIPPRequest: 7 status_code=1
    D [21/Aug/2004:16:37:59 +0200] CloseClient: 7
    D [21/Aug/2004:16:38:01 +0200] ReadClient: 4 GET /printers/LexmarkZ11?op=print-test-page HTTP/1.1
    D [21/Aug/2004:16:38:01 +0200] CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 3206
    I [21/Aug/2004:16:38:01 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=3206)
    D [21/Aug/2004:16:38:01 +0200] SendCommand: 4 file=7
    D [21/Aug/2004:16:38:01 +0200] AcceptClient: 6 from localhost:631.
    D [21/Aug/2004:16:38:01 +0200] ReadClient: 6 POST /printers/LexmarkZ11 HTTP/1.1
    D [21/Aug/2004:16:38:01 +0200] print_job: request file type is application/postscript.
    D [21/Aug/2004:16:38:01 +0200] check_quotas: requesting-user-name = ''
    D [21/Aug/2004:16:38:01 +0200] print_job: requesting-user-name = ''
    D [21/Aug/2004:16:38:01 +0200] Adding default job-sheets values "none,none"...
    I [21/Aug/2004:16:38:01 +0200] Adding start banner page "none" to job 15.
    I [21/Aug/2004:16:38:01 +0200] Adding end banner page "none" to job 15.
    I [21/Aug/2004:16:38:01 +0200] Job 15 queued on 'LexmarkZ11' by ''.
    D [21/Aug/2004:16:38:01 +0200] Job 15 hold_until = 0
    D [21/Aug/2004:16:38:01 +0200] StartJob(15, 0x80b7960)
    D [21/Aug/2004:16:38:01 +0200] StartJob() id = 15, file = 0/1
    D [21/Aug/2004:16:38:01 +0200] job-sheets=none,none
    D [21/Aug/2004:16:38:01 +0200] banner_page = 0
    D [21/Aug/2004:16:38:01 +0200] StartJob: argv = "LexmarkZ11","15","","Test Page","1","","/var/spool/cups/d00015-001"
    D [21/Aug/2004:16:38:01 +0200] StartJob: envp[0]="PATH=/usr/lib/cups/filter:/bin:/usr/bin"
    D [21/Aug/2004:16:38:01 +0200] StartJob: envp[1]="SOFTWARE=CUPS/1.1"
    D [21/Aug/2004:16:38:01 +0200] StartJob: envp[2]="USER=root"
    D [21/Aug/2004:16:38:01 +0200] StartJob: envp[3]="CHARSET=iso-8859-15"
    D [21/Aug/2004:16:38:01 +0200] StartJob: envp[4]="LANG=fr"
    D [21/Aug/2004:16:38:01 +0200] StartJob: envp[5]="TZ=Europe/Paris"
    D [21/Aug/2004:16:38:01 +0200] StartJob: envp[6]="PPD=/etc/cups/ppd/LexmarkZ11.ppd"
    D [21/Aug/2004:16:38:01 +0200] StartJob: envp[7]="CUPS_SERVERROOT=/etc/cups"
    D [21/Aug/2004:16:38:01 +0200] StartJob: envp[8]="RIP_MAX_CACHE=8m"
    D [21/Aug/2004:16:38:01 +0200] StartJob: envp[9]="TMPDIR=/var/spool/cups/tmp"
    D [21/Aug/2004:16:38:01 +0200] StartJob: envp[10]="CONTENT_TYPE=application/postscript"
    D [21/Aug/2004:16:38:01 +0200] StartJob: envp[11]="DEVICE_URI=parallel:/dev/lp0"
    D [21/Aug/2004:16:38:01 +0200] StartJob: envp[12]="PRINTER=LexmarkZ11"
    D [21/Aug/2004:16:38:01 +0200] StartJob: envp[13]="CUPS_DATADIR=/usr/share/cups"
    D [21/Aug/2004:16:38:01 +0200] StartJob: envp[14]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [21/Aug/2004:16:38:01 +0200] StartJob: envp[15]="CUPS_SERVER=localhost"
    D [21/Aug/2004:16:38:01 +0200] StartJob: envp[16]="IPP_PORT=631"
    D [21/Aug/2004:16:38:01 +0200] StartJob: statusfds = [ 8 9 ]
    D [21/Aug/2004:16:38:01 +0200] StartJob: filterfds[1] = [ 10 -1 ]
    D [21/Aug/2004:16:38:01 +0200] StartJob: filter = "/usr/lib/cups/filter/pstops"
    D [21/Aug/2004:16:38:01 +0200] StartJob: filterfds[0] = [ 11 12 ]
    D [21/Aug/2004:16:38:01 +0200] start_process("/usr/lib/cups/filter/pstops", 0xbfff0080, 0xbffef3f0, 10, 12, 9)
    I [21/Aug/2004:16:38:01 +0200] Started filter /usr/lib/cups/filter/pstops (PID 3207) for job 15.
    D [21/Aug/2004:16:38:01 +0200] StartJob: filter = "/usr/lib/cups/filter/foomatic-rip"
    D [21/Aug/2004:16:38:01 +0200] StartJob: filterfds[1] = [ 10 13 ]
    D [21/Aug/2004:16:38:01 +0200] start_process("/usr/lib/cups/filter/foomatic-rip", 0xbfff0080, 0xbffef3f0, 11, 13, 9)
    I [21/Aug/2004:16:38:01 +0200] Started filter /usr/lib/cups/filter/foomatic-rip (PID 3208) for job 15.
    D [21/Aug/2004:16:38:01 +0200] StartJob: backend = "/usr/lib/cups/backend/parallel"
    D [21/Aug/2004:16:38:01 +0200] StartJob: filterfds[0] = [ -1 11 ]
    D [21/Aug/2004:16:38:01 +0200] start_process("/usr/lib/cups/backend/parallel", 0xbfff0080, 0xbffef3f0, 10, 11, 9)
    I [21/Aug/2004:16:38:01 +0200] Started backend /usr/lib/cups/backend/parallel (PID 3209) for job 15.
    D [21/Aug/2004:16:38:01 +0200] ProcessIPPRequest: 6 status_code=0
    D [21/Aug/2004:16:38:01 +0200] [Job 15] Page = 595x842; 0,0 to 595,842
    D [21/Aug/2004:16:38:01 +0200] [Job 15] slowcollate=0, slowduplex=0, sloworder=0
    D [21/Aug/2004:16:38:01 +0200] [Job 15] 0 %%BoundingBox: 0 0 612 792
    D [21/Aug/2004:16:38:01 +0200] [Job 15] 0 %%Pages: 1
    D [21/Aug/2004:16:38:01 +0200] [Job 15] 0 %%LanguageLevel: 1
    D [21/Aug/2004:16:38:01 +0200] [Job 15] 0 %%DocumentData: Clean7Bit
    D [21/Aug/2004:16:38:01 +0200] [Job 15] 0 %%DocumentSuppliedResources: procset testprint/1.0
    D [21/Aug/2004:16:38:01 +0200] [Job 15] 0 %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
    D [21/Aug/2004:16:38:01 +0200] [Job 15] 0 %%Creator: Michael Sweet, Easy Software Products
    D [21/Aug/2004:16:38:01 +0200] [Job 15] 0 %%CreationDate: May 11, 1999
    D [21/Aug/2004:16:38:01 +0200] [Job 15] 0 %%Title: Test Page
    D [21/Aug/2004:16:38:01 +0200] [Job 15] 0 %%EndComments
    D [21/Aug/2004:16:38:01 +0200] [Job 15] 0 %%BeginProlog
    D [21/Aug/2004:16:38:01 +0200] [Job 15] 0 %%BeginResource procset testprint 1.1 0
    D [21/Aug/2004:16:38:01 +0200] [Job 15] 0 %%EndResource
    D [21/Aug/2004:16:38:01 +0200] [Job 15] 0 %%EndProlog
    D [21/Aug/2004:16:38:01 +0200] [Job 15] 0 %%Page: 1 1
    D [21/Aug/2004:16:38:01 +0200] [Job 15] perl: warning: Setting locale failed.
    D [21/Aug/2004:16:38:01 +0200] [Job 15] perl: warning: Please check that your locale settings:
    D [21/Aug/2004:16:38:01 +0200] [Job 15] LANGUAGE = (unset),
    D [21/Aug/2004:16:38:01 +0200] [Job 15] LC_ALL = (unset),
    D [21/Aug/2004:16:38:01 +0200] [Job 15] LANG = "fr"
    D [21/Aug/2004:16:38:01 +0200] [Job 15] are supported and installed on your system.
    D [21/Aug/2004:16:38:01 +0200] [Job 15] perl: warning: Falling back to the standard locale ("C").
    D [21/Aug/2004:16:38:01 +0200] CloseClient: 6
    D [21/Aug/2004:16:38:01 +0200] [Job 15] 0 %%Page: 1 1
    D [21/Aug/2004:16:38:01 +0200] [Job 15] pw = 595.0, pl = 842.0
    D [21/Aug/2004:16:38:01 +0200] [Job 15] PageLeft = 0.0, PageRight = 595.0
    D [21/Aug/2004:16:38:01 +0200] [Job 15] PageTop = 842.0, PageBottom = 0.0
    D [21/Aug/2004:16:38:01 +0200] [Job 15] PageWidth = 595.0, PageLength = 842.0
    D [21/Aug/2004:16:38:02 +0200] [Job 15] foomatic-rip version $Revision: 3.43.2.5 $ running...
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Parsing PPD file ...
    D [21/Aug/2004:16:38:02 +0200] [Job 15] *cupsFilter: "application/vnd.cups-postscript 0 foomatic-rip"
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Added option ColorSpace
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Added option PageSize
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Added option PageRegion
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Added option ImageableArea
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Added option PaperDimension
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Added option InkType
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Added option InkSaving
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Added option ResX
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Added option ResY
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Added option Font
    D [21/Aug/2004:16:38:02 +0200] [Job 15]
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Parameter Summary
    D [21/Aug/2004:16:38:02 +0200] [Job 15] -----------------
    D [21/Aug/2004:16:38:02 +0200] [Job 15]
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Spooler: cups
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Printer: LexmarkZ11
    D [21/Aug/2004:16:38:02 +0200] [Job 15] PPD file: /etc/cups/ppd/LexmarkZ11.ppd
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Printer model: Lexmark Z11 Foomatic/lz11 (recommended)
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Job title: Test Page
    D [21/Aug/2004:16:38:02 +0200] [Job 15] File(s) to be printed:
    D [21/Aug/2004:16:38:02 +0200] [Job 15]
    D [21/Aug/2004:16:38:02 +0200] [Job 15]
    D [21/Aug/2004:16:38:02 +0200] [Job 15]
    D [21/Aug/2004:16:38:02 +0200] [Job 15] ================================================
    D [21/Aug/2004:16:38:02 +0200] [Job 15]
    D [21/Aug/2004:16:38:02 +0200] [Job 15] File:
    D [21/Aug/2004:16:38:02 +0200] [Job 15]
    D [21/Aug/2004:16:38:02 +0200] [Job 15] ================================================
    D [21/Aug/2004:16:38:02 +0200] [Job 15]
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Reading PostScript input ...
    D [21/Aug/2004:16:38:02 +0200] [Job 15] --> This document is DSC-conforming!
    D [21/Aug/2004:16:38:02 +0200] [Job 15]
    D [21/Aug/2004:16:38:02 +0200] [Job 15] -----------
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Found: %%BeginProlog
    D [21/Aug/2004:16:38:02 +0200] [Job 15] 0 %%EOF
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Saw EOF!
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Found: %%EndProlog
    D [21/Aug/2004:16:38:02 +0200] [Job 15]
    D [21/Aug/2004:16:38:02 +0200] [Job 15] -----------
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Found: %%BeginSetup
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Inserting PostScript code for CUPS' page accounting
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Found: %%BeginFeature: *PageSize A4
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Option: PageSize=A4 --> Setting option
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Found: %% FoomaticRIPOptionSetting: PageSize=A4
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Option: PageSize=A4 --> Setting option
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Found: %%BeginFeature: *InkType Black
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Option: InkType=Black --> Setting option
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Found: %% FoomaticRIPOptionSetting: InkType=Black
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Option: InkType=Black --> Setting option
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Found: %%BeginFeature: *InkSaving 1
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Option: InkSaving=1 --> Setting option
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Found: %% FoomaticRIPOptionSetting: InkSaving=1
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Option: InkSaving=1 --> Setting option
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Found: %%BeginFeature: *ResX 582
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Option: ResX=582 --> Setting option
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Found: %% FoomaticRIPOptionSetting: ResX=582
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Option: ResX=582 --> Setting option
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Found: %%BeginFeature: *ResY 582
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Option: ResY=582 --> Setting option
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Found: %% FoomaticRIPOptionSetting: ResY=582
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Option: ResY=582 --> Setting option
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Found: %%EndSetup
    D [21/Aug/2004:16:38:02 +0200] [Job 15]
    D [21/Aug/2004:16:38:02 +0200] [Job 15] -----------
    D [21/Aug/2004:16:38:02 +0200] [Job 15] New page: 1 1
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Inserting option code into "PageSetup" section.
    D [21/Aug/2004:16:38:02 +0200] [Job 15] No page header or page header not DSC-conforming
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Stopping search for page header options
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Found:
    D [21/Aug/2004:16:38:02 +0200] [Job 15] pageHeight sub % Move down...
    D [21/Aug/2004:16:38:02 +0200] [Job 15] --> Output goes directly to the renderer now.
    D [21/Aug/2004:16:38:02 +0200] [Job 15]
    D [21/Aug/2004:16:38:02 +0200] [Job 15]
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Starting renderer
    D [21/Aug/2004:16:38:02 +0200] [Job 15] renderer PID kid4=3213
    D [21/Aug/2004:16:38:02 +0200] [Job 15] renderer command: lz11.foomatic --papersize=a4 --color=0 --inksaving=1 --resx=582 --resy=582
    D [21/Aug/2004:16:38:02 +0200] [Job 15] JCL: <job data>
    D [21/Aug/2004:16:38:02 +0200] [Job 15]
    D [21/Aug/2004:16:38:02 +0200] [Job 15] renderer return value: 16777215
    D [21/Aug/2004:16:38:02 +0200] [Job 15] renderer received signal: 16777215
    D [21/Aug/2004:16:38:02 +0200] [Job 15]
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Closing renderer
    D [21/Aug/2004:16:38:02 +0200] [Job 15] KID3 exited with status 1
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Renderer exit stat: 1
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Process dying with "The renderer command line returned an unrecognized error code 16777215.", exit stat: 1
    D [21/Aug/2004:16:38:02 +0200] [Job 15] The renderer command line returned an unrecognized error code 16777215.
    D [21/Aug/2004:16:38:02 +0200] [Job 15] tail process done writing data to STDOUT
    D [21/Aug/2004:16:38:02 +0200] [Job 15] KID4 finished
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Renderer process finished
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Killing process 3212 (KID3)
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Process dying with "Error closing renderer", exit stat: 1
    D [21/Aug/2004:16:38:02 +0200] [Job 15] Error closing renderer
    E [21/Aug/2004:16:38:02 +0200] PID 3208 stopped with status 1!
    D [21/Aug/2004:16:38:02 +0200] UpdateJob: job 15, file 0 is complete.
    D [21/Aug/2004:16:38:02 +0200] CancelJob: id = 15
    D [21/Aug/2004:16:38:02 +0200] StopJob: id = 15, force = 0
    D [21/Aug/2004:16:38:02 +0200] StopJob: printer state is 3
    D [21/Aug/2004:16:38:03 +0200] ReadClient: 4 GET /jobs HTTP/1.1
    D [21/Aug/2004:16:38:03 +0200] CGI /usr/lib/cups/cgi-bin/jobs.cgi started - PID = 3215
    I [21/Aug/2004:16:38:03 +0200] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=3215)
    D [21/Aug/2004:16:38:03 +0200] SendCommand: 4 file=7
    D [21/Aug/2004:16:38:03 +0200] AcceptClient: 6 from localhost:631.
    D [21/Aug/2004:16:38:03 +0200] ReadClient: 6 POST / HTTP/1.1
    D [21/Aug/2004:16:38:03 +0200] ProcessIPPRequest: 6 status_code=1
    D [21/Aug/2004:16:38:03 +0200] CloseClient: 6

    • [^] # Re: Messages dus à une tentative d'impression

      Posté par  . Évalué à 1.

      Je ne sais pas si ça peut t'aider, mais moi j'ai eu des problèmes de permissions en installant mon imprimante. J'essayais d'imprimer, mais rien ne sortait, et les echo "groink" > /dev/lp0 ne faisaient rien non plus. Il faut s'assurer que ton ip est autorisée sans /etc/cups/cupsd.conf (ça a l'air d'aller d'après les logs), mais aussi que tu es un utilisateur autorisé pour l'imprimante dans /etc/cups/printers.conf.

  • # et une autre voix?

    Posté par  . Évalué à 1.

    pourquoi n'essaye tu pas apsfilter pour configurer ton imprimante?

    il faut lancer a la main le programme:

    cd /usr/share/apsfilter/

    ./SETUP


    parce que moi cups c'est joli mais je n'aime pas trop (pour le moment), histoire de gout

    • [^] # Re: et une autre voix?

      Posté par  . Évalué à 1.

      J'ai déjà essayé, mais ça n'a rien donné de plus... L'imprimante reste toujours muette :-(

Suivre le flux des commentaires

Note : les commentaires appartiennent à celles et ceux qui les ont postés. Nous n’en sommes pas responsables.