Forum Linux.debian/ubuntu [Résolu] Affichage poussif sous kubuntu avec cg ATI 5570

Posté par  .
Étiquettes : aucune
0
9
mai
2011

[Résolu] : j'ai upgradé sur Natty, et réinstallé derrière les pilotes propriétaires (par pur hasard parce que j'ai testé de nouveau les pilotes libres qui m'ont planté 2 fois la machine). Et le système a enfin acquis la fluidité attendue.
Merci à tous pour vos avis.

Hello,

j'ai un petit souci sur ma machine de dev sous kubuntu maverick, la réactivité de l'affichage n'est pas terrible.
Ca ne m'empêche pas de coder, loin de là, mais c'est très frustrant car sous 7 (oui j'ai un dual boot avec du crosoft pour photoshop, bouh pas bien je sais) ça carbure beaucoup plus vite ce qui est quand même un comble. le scroll sous chrome/chromium par exemple est incomparable. Saccadé avec 1/2 seconde de retard d'un côté, ultra fluide de l'autre.

La machine, sans être une machine de course est quand même correcte, un dual core avec 8Go de RAM et une radeon HD 5570.
J'ai les pilotes propriétaires pour la CG, désactivé tous les zigouigouis de kde qui pourraient faire ramer, mais rien n'y fait. Pourtant la machine se tourne les pouces à 0.05 de charge.

Le plus frustrant est qu'au taf j'ai une machine qui sur le papier est une brouette en comparaison, avec exactement la même conf KDE mais en 9.10 qui est par contre elle hyper réactive.

Voilà, ça ressemble comme ça à un problème d'affichage puisque la machine n'est pas chargée mais je ne vois pas trop d'alternative pour les pilotes vidéo.

Si vous avez des idées, merci d'avance ;)
Laurent

Edit : ma carte graphique n'est pas une 5500 mais une 5570, corrigé.

  • # pilotes libres ?

    Posté par  . Évalué à 3.

    peut-être un problème entre le pilote proprio et ta version du noyau. X.org utilise bien catalyst ou vesa ?

    As-tu essayé avec les pilotes libre ? Ils devraient faire l'affaire. Avec le noyau 2.6.38 ils font tourner sans problème de perf KDE + effet.

    • [^] # Re: pilotes libres ?

      Posté par  . Évalué à 1.

      en cherchant un peu (ati 5500 linux), on voit que la carte graphique n'est pas toute jeune, comprendre au moins un peu plus d'un an. C'est donc un point positif pour le support sous Linux. Et par chance, le second lien me conduisant ici : http://fr.driverscollection.com/?H=Radeon%20HD%205500&By=ATI&SS=Linux ; j'en suis pleinement rassuré : enfin des drivers disponibles sur des sites collectors à la "tous-les-drivers-point-com". Ma bonne dame, Linux est enfin prêt pour le desktop de Mme Michou.

      trêve de plaisanterie, il conviendrait de regarder si la carte est supportée ou pas et d'y associer le pilote idoine sur ta belle distribution. Si cela ne fonctionne pas avec LA distribution que tu as choisi, essaie avec une autre. Les développeurs Linuxiens sont pervers et ne comblent pas nécessairement les utilisateurs d'un coup, un seul. Il faut parfois le mériter un peu.

      • [^] # Re: pilotes libres ?

        Posté par  . Évalué à 2.

        ayant lu en diagonale, je découvre que tu utilises Ubuntu :
        - essaie d'installer le pilote propriétaire : système / admin / pilotes supplémentaire,
        - sinon essaie la dernière version (natty).

        • [^] # Re: pilotes libres ?

          Posté par  . Évalué à 1.

          Ce sont les pilotes propriétaires que j'utilise déjà.
          Natty, c'est prévu pour ce week end ;)

          • [^] # Re: pilotes libres ?

            Posté par  . Évalué à 1.

            Perso j'ai noté une grande différence de perf sous les pilotes libres avec le noyau 2.6.38 (sous Debian).

            J'espère qu'il en sera de même pour toi…

            • [^] # Re: pilotes libres ?

              Posté par  . Évalué à 0.

              J'espère aussi ! Je mettrai le verdict ici.

              • [^] # Re: pilotes libres ?

                Posté par  . Évalué à 0.

                Me voilà donc avec un upgrade natty tout frais, pilotes libres. Malheureusement je n'ai pas noté la même amélioration des performances graphiques que toi.

                Ceci dit comme l'affichage est désormais aussi rapide qu'avec les pilotes propriétaires, je vais rester avec les pilotes libres cette fois.

    • [^] # Re: pilotes libres ?

      Posté par  . Évalué à 1.

      C'est catalyst.
      Je viens d'essayer les pilotes libres, à ma grande surprise je n'ai noté aucun changement de perf (je m'attendais plutôt à une régression en fait).
      Mais pas mieux :|

      • [^] # Re: pilotes libres ?

        Posté par  . Évalué à 1.

        Tu as installé catalyst depuis les dépôts Ubuntu ou par l'installeur fournit par AMD ?

        Avant j'utilisais l'installeur, et pour avoir l'accélération 3D avec le pilote libre il fallait réinstaller les paquets xserver-xorg-core, libgl1-mesa-glx, libgl1-mesa-dri le pilote proprio écrasant certains fichiers.

  • # Bloat

    Posté par  (site web personnel) . Évalué à -1.

    Peut-être faut il désactiver quelques services ou même opter tout bonnement pour une distribution moins lourde...

    • [^] # Re: Bloat

      Posté par  . Évalué à 1.

      Soyons clair, c'est largement utilisable en l'état. Simplement je trouve frustrant que :
      - la même machine tourne bien mieux sous windows 7
      - une machine bien moins puissante tourne bien mieux sous kubuntu

      Je me dis qu'il y a un truc qui cloche sans parvenir à mettre la main dessus.

  • # Qu’est-ce qu’une machine de course ?

    Posté par  . Évalué à 2.

    La machine, sans être une machine de course est quand même correcte, un dual core avec 8Go de RAM et une radeon HD 5500.

    Ouch…
    Par curiosité : qu’est-ce qu’une machine de course pour toi ?
    Sinon : une copie du contenu de Xorg.0.log pourrait nous aider.

    • [^] # Re: Qu’est-ce qu’une machine de course ?

      Posté par  . Évalué à 3.

      Bein un atom dual core avec 8Go de ram!

    • [^] # Re: Qu’est-ce qu’une machine de course ?

      Posté par  . Évalué à 1.

      Alors oui, j'ai beaucoup de ram. C'est pour pouvoir monter en mémoire tout mon projet, mais tu constateras qu'à part ça on est loin des canons actuels.
      Alors non ce n'est pas une machine de course, disons que c'est une bonne grosse familiale avec de la place pour les bagages ;)

      Je reboote avec les pilotes propriétaires et je colle les logs.

    • [^] # Re: Qu’est-ce qu’une machine de course ?

      Posté par  . Évalué à 1.

      [ 29.460] X Protocol Version 11, Revision 0
      [ 29.460] Build Operating System: Linux 2.6.24-28-server x86_64 Ubuntu
      [ 29.460] Current Operating System: Linux ikki 2.6.35-28-generic #50-Ubuntu SMP Fri Mar 18 18:42:20 UTC 2011 x86_64
      [ 29.460] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-28-generic root=UUID=ae749d94-7e7c-4af1-9e73-1720ac3cf965 ro quiet splash
      [ 29.460] Build Date: 09 January 2011 12:14:27PM
      [ 29.460] xorg-server 2:1.9.0-0ubuntu7.3 (For technical support please see http://www.ubuntu.com/support)
      [ 29.460] Current version of pixman: 0.18.4
      [ 29.460] Before reporting problems, check http://wiki.x.org
      to make sure that you have the latest version.
      [ 29.460] Markers: (--) probed, () from config file, (==) default setting,
      (++) from command line, (!!) notice, (II) informational,
      (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
      29.460 Log file: "/var/log/Xorg.0.log", Time: Tue May 10 13:58:16 2011
      29.460 Using config file: "/etc/X11/xorg.conf"
      29.460 Using system config directory "/usr/share/X11/xorg.conf.d"
      29.460 ServerLayout "amdcccle Layout"
      29.461 |-->Screen "amdcccle-Screen[1]-0" (0)
      29.461 | |-->Monitor ""
      [ 29.461] (      ) | |-->Device "amdcccle-Device[1]-0"
      29.461 No monitor specified for screen "amdcccle-Screen[1]-0".
      Using a default monitor configuration.
      29.461 Automatically adding devices
      29.461 Automatically enabling devices
      29.461 The directory "/usr/share/fonts/X11/cyrillic" does not exist.
      [ 29.461] Entry deleted from font path.
      29.461 FontPath set to:
      /usr/share/fonts/X11/misc,
      /usr/share/fonts/X11/100dpi/:unscaled,
      /usr/share/fonts/X11/75dpi/:unscaled,
      /usr/share/fonts/X11/Type1,
      /usr/share/fonts/X11/100dpi,
      /usr/share/fonts/X11/75dpi,
      /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
      built-ins

      29.461 ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"

      29.461 The server relies on udev to provide the list of input devices.

      If no devices become available, reconfigure udev or disable AutoAddDevices.

      29.461 Loader magic: 0x7d17a0

      29.461 Module ABI versions:

      [ 29.461] X.Org ANSI C Emulation: 0.4

      [ 29.461] X.Org Video Driver: 8.0

      [ 29.461] X.Org XInput driver : 11.0

      [ 29.461] X.Org Server Extension : 4.0

      29.462 PCI:*(0:1:0:0) 1002:68d9:1462:2150 rev 0, Mem @ 0xd0000000/268435456, 0xfe8c0000/131072, I/O @ 0x0000c000/256, BIOS @ 0x????????/131072

      29.462 Open ACPI failed (/var/run/acpid.socket) (No such file or directory)

      29.462 "extmod" will be loaded by default.

      29.462 "dbe" will be loaded by default.

      29.462 "glx" will be loaded. This was enabled by default and also specified in the config file.

      29.462 "record" will be loaded by default.

      29.462 "dri" will be loaded by default.

      29.462 "dri2" will be loaded by default.

      29.462 LoadModule: "glx"

      29.462 Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so

      29.462 Module glx: vendor="FireGL - ATI Technologies Inc."

      [ 29.462] compiled for 7.6.0, module version = 1.0.0

      29.462 Loading extension GLX

      29.462 LoadModule: "extmod"

      29.462 Loading /usr/lib/xorg/modules/extensions/libextmod.so

      29.462 Module extmod: vendor="X.Org Foundation"

      [ 29.462] compiled for 1.9.0, module version = 1.0.0

      [ 29.462] Module class: X.Org Server Extension

      [ 29.462] ABI class: X.Org Server Extension, version 4.0

      29.462 Loading extension MIT-SCREEN-SAVER

      29.462 Loading extension XFree86-VidModeExtension

      29.462 Loading extension XFree86-DGA
      29.462 Loading extension DPMS
      29.462 Loading extension XVideo
      29.462 Loading extension XVideo-MotionCompensation
      29.462 Loading extension X-Resource
      29.462 LoadModule: "dbe"
      29.463 Loading /usr/lib/xorg/modules/extensions/libdbe.so
      29.463 Module dbe: vendor="X.Org Foundation"
      [ 29.463] compiled for 1.9.0, module version = 1.0.0
      [ 29.463] Module class: X.Org Server Extension
      [ 29.463] ABI class: X.Org Server Extension, version 4.0
      29.463 Loading extension DOUBLE-BUFFER
      29.463 LoadModule: "record"
      29.463 Loading /usr/lib/xorg/modules/extensions/librecord.so
      29.463 Module record: vendor="X.Org Foundation"
      [ 29.463] compiled for 1.9.0, module version = 1.13.0
      [ 29.463] Module class: X.Org Server Extension
      [ 29.463] ABI class: X.Org Server Extension, version 4.0
      29.463 Loading extension RECORD
      29.463 LoadModule: "dri"
      29.463 Loading /usr/lib/xorg/modules/extensions/libdri.so
      29.463 Module dri: vendor="X.Org Foundation"
      [ 29.463] compiled for 1.9.0, module version = 1.0.0
      [ 29.463] ABI class: X.Org Server Extension, version 4.0
      29.463 Loading extension XFree86-DRI
      29.463 LoadModule: "dri2"
      29.463 Loading /usr/lib/xorg/modules/extensions/libdri2.so
      29.463 Module dri2: vendor="X.Org Foundation"
      [ 29.463] compiled for 1.9.0, module version = 1.2.0
      [ 29.463] ABI class: X.Org Server Extension, version 4.0
      29.463 Loading extension DRI2
      29.463 LoadModule: "fglrx"
      29.464 Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so
      29.474 Module fglrx: vendor="FireGL - ATI Technologies Inc."
      [ 29.474] compiled for 1.4.99.906, module version = 8.78.30
      [ 29.474] Module class: X.Org Video Driver
      29.474 Loading sub module "fglrxdrm"
      29.474 LoadModule: "fglrxdrm"
      29.474 Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
      29.475 Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
      [ 29.475] compiled for 1.8.99.905, module version = 8.78.30
      29.475 ATI Proprietary Linux Driver Version Identifier:8.78.30
      29.475 ATI Proprietary Linux Driver Release Identifier: 8.78.3

      29.475 ATI Proprietary Linux Driver Build Date: Sep 20 2010 21:31:08
      29.475 using VT number 7

      29.475 Falling back to old probe method for fglrx
      29.477 Loading PCS database from /etc/ati/amdpcsdb
      29.477 Chipset Supported AMD Graphics Processor (0x68D9) found
      29.477 fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
      29.478 AMD Video driver is running on a device belonging to a group targeted for this release
      29.478 AMD Video driver is signed
      29.478 fglrx(0): pEnt->device->identifier=0x2116180
      29.478 fglrx(0): === [xdl_x760_atiddxPreInit] === begin
      29.478 Loading sub module "vgahw"
      29.478 LoadModule: "vgahw"
      29.497 Loading /usr/lib/xorg/modules/libvgahw.so
      29.497 Module vgahw: vendor="X.Org Foundation"
      [ 29.497] compiled for 1.9.0, module version = 0.1.0
      [ 29.497] ABI class: X.Org Video Driver, version 8.0
      29.497 fglrx(0): Depth 24, (--) framebuffer bpp 32
      29.497 fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
      29.497 fglrx(0): Default visual is TrueColor
      29.497 fglrx(0): RGB weight 888
      29.497 fglrx(0): Using 8 bits per RGB
      29.497 fglrx(0): Buffer Tiling is ON
      29.497 Loading sub module "fglrxdrm"
      29.497 LoadModule: "fglrxdrm"
      29.497 Reloading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
      [ 29.498] ukiDynamicMajor: found major device number 249
      [ 29.498] ukiDynamicMajor: found major device number 249
      [ 29.498] ukiOpenByBusid: Searching for BusID PCI:1:0:0
      [ 29.498] ukiOpenDevice: node name is /dev/ati/card0
      [ 29.498] ukiOpenDevice: open result is 10, (OK)
      [ 29.498] ukiOpenByBusid: ukiOpenMinor returns 10
      [ 29.498] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
      29.498 fglrx(0): NoAccel = NO
      29.498 fglrx(0): ATI 2D Acceleration Architecture enabled
      29.498 fglrx(0): Chipset: "ATI Radeon HD 5570" (Chipset = 0x68d9)
      29.498 fglrx(0): (PciSubVendor = 0x1462, PciSubDevice = 0x2150)
      29.498 fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
      29.498 fglrx(0): Linear framebuffer (phys) at 0xd0000000
      29.498 fglrx(0): MMIO registers at 0xfe8c0000
      29.498 fglrx(0): I/O port at 0x0000c000
      29.498 fglrx(0): ROM-BIOS at 0x000c0000
      29.499 fglrx(0): AC Adapter is used
      29.501 fglrx(0): Primary V_BIOS segment is: 0xc000
      29.567 Loading sub module "vbe"
      29.567 LoadModule: "vbe"
      29.567 Loading /usr/lib/xorg/modules/libvbe.so
      29.567 Module vbe: vendor="X.Org Foundation"
      [ 29.567] compiled for 1.9.0, module version = 1.1.0
      [ 29.567] ABI class: X.Org Video Driver, version 8.0
      29.567 fglrx(0): VESA BIOS detected
      29.567 fglrx(0): VESA VBE Version 3.0
      29.567 fglrx(0): VESA VBE Total Mem: 16384 kB
      29.567 fglrx(0): VESA VBE OEM: ATI ATOMBIOS
      29.567 fglrx(0): VESA VBE OEM Software Rev: 12.16
      29.567 fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
      29.567 fglrx(0): VESA VBE OEM Product: REDWOOD
      29.567 fglrx(0): VESA VBE OEM Product Rev: 01.00
      29.615 fglrx(0): ATI Video BIOS revision 9 or later detected
      29.615 fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
      29.615 fglrx(0): PCIE card detected
      29.615 fglrx(0): Using per-process page tables (PPPT) as GART.
      29.615 fglrx(0): board is an unknown third party board, chipset is supported
      29.616 fglrx(0): Using adapter: 1:0.0.
      29.656 fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
      29.670 fglrx(0): Interrupt handler installed at IRQ 46.
      29.670 fglrx(0): RandR 1.2 support is enabled!
      29.670 fglrx(0): RandR 1.2 rotation support is enabled!
      29.670 fglrx(0): Center Mode is disabled
      29.670 Loading sub module "fb"
      29.670 LoadModule: "fb"
      29.671 Loading /usr/lib/xorg/modules/libfb.so
      29.671 Module fb: vendor="X.Org Foundation"
      [ 29.671] compiled for 1.9.0, module version = 1.0.0
      [ 29.671] ABI class: X.Org ANSI C Emulation, version 0.4
      29.671 fglrx(0): Active stereo disabled
      29.671 Loading sub module "ddc"
      29.671 LoadModule: "ddc"
      29.671 Module "ddc" already built-in
      29.805 fglrx(0): Finished Initialize PPLIB!
      29.805 fglrx(0): Output DFP1 has no monitor section
      29.806 fglrx(0): Output DFP2 using monitor section 0-DFP2
      29.806 fglrx(0): Option "PreferredMode" "1600x1200"
      29.806 fglrx(0): Option "Position" "0 0"
      29.806 fglrx(0): Option "Disable" "false"
      29.806 fglrx(0): Option "Rotate" "normal"
      29.806 fglrx(0): Option "TargetRefresh" "60"
      29.806 fglrx(0): Output CRT1 has no monitor section
      29.806 fglrx(0): Output CRT2 using monitor section 0-CRT2
      29.806 fglrx(0): Option "PreferredMode" "1680x1050"
      29.806 fglrx(0): Option "Position" "1600 12"
      29.806 fglrx(0): Option "Disable" "false"
      29.806 fglrx(0): Option "Rotate" "normal"
      29.806 fglrx(0): Option "TargetRefresh" "60"
      29.806 Loading sub module "ddc"
      29.806 LoadModule: "ddc"
      29.806 Module "ddc" already built-in
      29.806 fglrx(0): Connected Display0: DFP2
      29.806 fglrx(0): Display0 EDID data ---------------------------
      29.806 fglrx(0): Manufacturer: SAM Model: 1ae Serial#: 1112683056
      29.806 fglrx(0): Year: 2005 Week: 36
      29.806 fglrx(0): EDID Version: 1.3
      29.806 fglrx(0): Digital Display Input
      29.806 fglrx(0): Max Image Size [cm]: horiz.: 41 vert.: 31
      29.806 fglrx(0): Gamma: 2.20
      29.806 fglrx(0): DPMS capabilities: Off
      29.806 fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
      29.806 fglrx(0): First detailed timing is preferred mode
      29.806 fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
      29.806 fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
      29.806 fglrx(0): Supported established timings:
      29.806 fglrx(0): 720x400@70Hz
      29.806 fglrx(0): 640x480@60Hz
      29.806 fglrx(0): 640x480@67Hz
      29.806 fglrx(0): 640x480@72Hz
      29.806 fglrx(0): 640x480@75Hz
      29.806 fglrx(0): 800x600@56Hz
      29.806 fglrx(0): 800x600@60Hz
      29.806 fglrx(0): 800x600@72Hz
      29.806 fglrx(0): 800x600@75Hz
      29.806 fglrx(0): 832x624@75Hz
      29.806 fglrx(0): 1024x768@60Hz
      29.806 fglrx(0): 1024x768@70Hz
      29.806 fglrx(0): 1024x768@75Hz
      29.806 fglrx(0): 1280x1024@75Hz
      29.806 fglrx(0): 1152x864@75Hz
      29.806 fglrx(0): Manufacturer's mask: 0
      29.806 fglrx(0): Supported standard timings:
      29.806 fglrx(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
      29.806 fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
      29.806 fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
      29.806 fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
      29.806 fglrx(0): Supported detailed timing:
      29.806 fglrx(0): clock: 162.0 MHz Image Size: 408 x 306 mm
      29.806 fglrx(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0
      29.806 fglrx(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0
      29.806 fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
      29.806 fglrx(0): Monitor name: SyncMaster
      29.806 fglrx(0): Serial No: HSCY904534
      29.806 fglrx(0): EDID (in hex):
      29.806 fglrx(0): 00ffffffffffff004c2dae0130325242
      29.806 fglrx(0): 240f010380291f782aee95a3544c9926
      29.806 fglrx(0): 0f5054bfef80a94081808140714f0101
      29.806 fglrx(0): 010101010101483f403062b0324040c0
      29.806 fglrx(0): 130098321100001e000000fd00384b1e
      29.806 fglrx(0): 5111000a202020202020000000fc0053
      29.806 fglrx(0): 796e634d61737465720a2020000000ff
      29.806 fglrx(0): 00485343593930343533340a20200015
      29.806 fglrx(0): End of Display0 EDID data --------------------
      29.806 fglrx(0): Connected Display1: CRT2
      29.806 fglrx(0): Display1 EDID data ---------------------------
      29.806 fglrx(0): Manufacturer: BNQ Model: 76c2 Serial#: 6688
      29.806 fglrx(0): Year: 2006 Week: 37
      29.806 fglrx(0): EDID Version: 1.3
      29.806 fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
      29.806 fglrx(0): Sync: Separate Composite
      29.806 fglrx(0): Max Image Size [cm]: horiz.: 43 vert.: 27
      29.806 fglrx(0): Gamma: 2.20
      29.806 fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
      29.806 fglrx(0): Default color space is primary color space
      29.806 fglrx(0): First detailed timing is preferred mode
      29.806 fglrx(0): redX: 0.640 redY: 0.332 greenX: 0.288 greenY: 0.601
      29.806 fglrx(0): blueX: 0.146 blueY: 0.065 whiteX: 0.313 whiteY: 0.329
      29.806 fglrx(0): Supported established timings:
      29.806 fglrx(0): 720x400@70Hz
      29.806 fglrx(0): 640x480@60Hz
      29.806 fglrx(0): 640x480@75Hz
      29.806 fglrx(0): 800x600@60Hz
      29.806 fglrx(0): 800x600@75Hz
      29.806 fglrx(0): 832x624@75Hz
      29.806 fglrx(0): 1024x768@60Hz
      29.806 fglrx(0): 1024x768@70Hz
      29.806 fglrx(0): 1024x768@75Hz
      29.806 fglrx(0): 1280x1024@75Hz
      29.806 fglrx(0): 1152x864@75Hz
      29.806 fglrx(0): Manufacturer's mask: 0
      29.806 fglrx(0): Supported standard timings:
      29.806 fglrx(0): #0: hsize: 800 vsize 600 refresh: 75 vid: 20293
      29.806 fglrx(0): #1: hsize: 1024 vsize 768 refresh: 75 vid: 20321
      29.806 fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
      29.806 fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
      29.806 fglrx(0): #4: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
      29.806 fglrx(0): #5: hsize: 1152 vsize 864 refresh: 75 vid: 20337
      29.806 fglrx(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
      29.806 fglrx(0): Supported detailed timing:
      29.806 fglrx(0): clock: 146.2 MHz Image Size: 433 x 271 mm
      29.806 fglrx(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
      29.806 fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
      29.806 fglrx(0): Supported detailed timing:
      29.806 fglrx(0): clock: 25.2 MHz Image Size: 376 x 301 mm
      29.806 fglrx(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0
      29.806 fglrx(0): v_active: 350 v_sync: 387 v_sync_end 389 v_blanking: 449 v_border: 0
      29.806 fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 84 kHz, PixClock max 175 MHz
      29.806 fglrx(0): Monitor name: BenQ FP202W
      29.806 fglrx(0): EDID (in hex):
      29.806 fglrx(0): 00ffffffffffff0009d1c276201a0000
      29.806 fglrx(0): 251001036c2b1b78eecfb5a355499925
      29.806 fglrx(0): 105054a56f80454f614f81408180818f
      29.806 fglrx(0): 714fb300010121399030621a274068b0
      29.806 fglrx(0): 3600b10f1100001cd50980a0205e6310
      29.806 fglrx(0): 10605208782d1100001a000000fd0038
      29.806 fglrx(0): 4c1e5411000a202020202020000000fc
      29.806 fglrx(0): 0042656e51204650323032570a200057
      29.806 fglrx(0): End of Display1 EDID data --------------------
      29.820 fglrx(0): Output DFP1 disconnected
      29.820 fglrx(0): Output DFP2 connected
      29.820 fglrx(0): Output CRT1 disconnected
      29.820 fglrx(0): Output CRT2 connected
      29.820 fglrx(0): Using user preference for initial modes
      29.820 fglrx(0): Output DFP2 using initial mode 1600x1200
      29.820 fglrx(0): Output CRT2 using initial mode 1680x1050
      29.820 fglrx(0): DPI set to (96, 96)
      29.820 fglrx(0): Adapter ATI Radeon HD 5570 has 2 configurable heads and 2 displays connected.
      29.820 fglrx(0): PseudoColor visuals disabled
      29.820 Loading sub module "ramdac"
      29.820 LoadModule: "ramdac"
      29.820 Module "ramdac" already built-in
      29.820 fglrx(0): NoDRI = NO
      29.820 fglrx(0): Capabilities: 0x00000000
      29.820 fglrx(0): CapabilitiesEx: 0x00000000
      29.820 fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
      29.820 fglrx(0): UseFastTLS=0
      29.820 fglrx(0): BlockSignalsOnLock=1
      29.820 Depth 24 pixmap format is 32 bpp
      29.821 Loading extension ATIFGLRXDRI
      29.821 fglrx(0): doing swlDriScreenInit
      29.821 fglrx(0): swlDriScreenInit for fglrx driver
      [ 29.821] ukiDynamicMajor: found major device number 249
      [ 29.821] ukiDynamicMajor: found major device number 249
      [ 29.821] ukiDynamicMajor: found major device number 249
      [ 29.821] ukiOpenByBusid: Searching for BusID PCI:1:0:0
      [ 29.821] ukiOpenDevice: node name is /dev/ati/card0
      [ 29.821] ukiOpenDevice: open result is 16, (OK)
      [ 29.821] ukiOpenByBusid: ukiOpenMinor returns 16
      [ 29.821] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
      29.822 fglrx(0): [uki] DRM interface version 1.0
      29.822 fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
      29.822 fglrx(0): [uki] added 8192 byte SAREA at 0x2000
      29.822 fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f221ab51000
      29.822 fglrx(0): [uki] framebuffer handle = 0x3000
      29.822 fglrx(0): [uki] added 1 reserved context for kernel
      29.822 fglrx(0): swlDriScreenInit done
      29.822 fglrx(0): Kernel Module Version Information:
      29.822 fglrx(0): Name: fglrx
      29.822 fglrx(0): Version: 8.78.30
      29.822 fglrx(0): Date: Sep 20 2010
      29.822 fglrx(0): Desc: ATI FireGL DRM kernel module
      29.822 fglrx(0): Kernel Module version matches driver.
      29.822 fglrx(0): Kernel Module Build Time Information:
      29.822 fglrx(0): Build-Kernel UTS_RELEASE: 2.6.35-28-generic
      29.822 fglrx(0): Build-Kernel MODVERSIONS: yes
      29.822 fglrx(0): Build-Kernel SMP: yes
      29.822 fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
      29.822 fglrx(0): [uki] register handle = 0x00004000
      29.836 fglrx(0): DRI initialization successfull
      29.836 fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01790000
      29.836 fglrx(0): FBMM initialized for area (0,0)-(3328,1856)
      29.836 fglrx(0): FBMM auto alloc for area (0,0)-(3328,1792) (front color buffer - assumption)
      29.836 fglrx(0): Largest offscreen area available: 3328 x 64
      29.836 fglrx(0): Backing store disabled
      29.836 Loading extension FGLRXEXTENSION
      29.836 fglrx(0): DPMS enabled
      29.837 fglrx(0): Initialized in-driver Xinerama extension
      29.837 fglrx(0): Textured Video is enabled.
      29.837 LoadModule: "glesx"
      29.837 Loading /usr/lib/xorg/extra-modules/modules/glesx.so
      29.837 Module glesx: vendor="X.Org Foundation"
      [ 29.837] compiled for 1.8.99.905, module version = 1.0.0
      29.837 Loading extension GLESX
      29.837 fglrx(0): GLESX enableFlags = 592
      29.837 fglrx(0): GLESX is enabled
      29.837 fglrx(0): Acceleration enabled
      29.837 LoadModule: "amdxmm"
      29.837 Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so
      29.837 Module amdxmm: vendor="X.Org Foundation"
      [ 29.837] compiled for 1.8.99.905, module version = 1.0.0
      29.838 Loading extension AMDXVOPL
      29.838 fglrx(0): UVD2 feature is available
      29.839 fglrx(0): Enable composite support successfully
      29.839 fglrx(0): X context handle = 0x1
      29.839 fglrx(0): [DRI] installation complete
      29.839 fglrx(0): Silken mouse enabled
      29.840 fglrx(0): Using HW cursor of display infrastructure!
      29.840 fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
      29.907 fglrx(0): User Preference Output DFP2 using refresh rate 60.0 Hz.
      29.947 fglrx(0): User Preference Output CRT2 using refresh rate 60.0 Hz.
      29.979 RandR disabled
      29.979 Initializing built-in extension Generic Event Extension
      29.979 Initializing built-in extension SHAPE
      29.979 Initializing built-in extension MIT-SHM
      29.979 Initializing built-in extension XInputExtension
      29.979 Initializing built-in extension XTEST
      29.979 Initializing built-in extension BIG-REQUESTS
      29.979 Initializing built-in extension SYNC
      29.979 Initializing built-in extension XKEYBOARD
      29.979 Initializing built-in extension XC-MISC
      29.979 Initializing built-in extension SECURITY
      29.979 Initializing built-in extension XINERAMA
      29.979 Initializing built-in extension XFIXES
      29.979 Initializing built-in extension RENDER
      29.979 Initializing built-in extension RANDR
      29.979 Initializing built-in extension COMPOSITE
      29.979 Initializing built-in extension DAMAGE
      29.979 Initializing built-in extension GESTURE
      [ 29.990] ukiDynamicMajor: found major device number 249
      [ 29.990] ukiDynamicMajor: found major device number 249
      [ 29.990] ukiOpenByBusid: Searching for BusID PCI:1:0:0
      [ 29.990] ukiOpenDevice: node name is /dev/ati/card0
      [ 29.990] ukiOpenDevice: open result is 17, (OK)
      [ 29.990] ukiOpenByBusid: ukiOpenMinor returns 17
      [ 29.990] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
      30.037 AIGLX: Loaded and initialized /usr/lib64/dri/fglrx_dri.so
      30.037 GLX: Initialized DRI GL provider for screen 0
      30.037 fglrx(0): Enable the clock gating!
      30.037 fglrx(0): Setting screen physical size to 867 x 317
      30.050 XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
      30.057 config/udev: Adding input device Power Button (/dev/input/event1)
      30.057 Power Button: Applying InputClass "evdev keyboard catchall"
      30.057 LoadModule: "evdev"
      30.057 Loading /usr/lib/xorg/modules/input/evdev_drv.so
      30.057 Module evdev: vendor="X.Org Foundation"
      [ 30.057] compiled for 1.9.0, module version = 2.3.2
      [ 30.057] Module class: X.Org XInput Driver
      [ 30.057] ABI class: X.Org XInput driver, version 11.0
      30.057 Power Button: always reports core events
      30.057 Power Button: Device: "/dev/input/event1"
      30.080 Power Button: Found keys
      30.080 Power Button: Configuring as keyboard
      30.080 XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
      30.080 Option "xkb_rules" "evdev"
      30.080 Option "xkb_model" "evdev"
      30.080 Option "xkb_layout" "fr"
      30.080 Option "xkb_variant" "oss"
      30.081 XKB: reuse xkmfile /var/lib/xkb/server-03B9BA61C8A1BA78B8E8368594E484A532C88FC7.xkm
      30.082 config/udev: Adding input device Power Button (/dev/input/event0)
      30.082 Power Button: Applying InputClass "evdev keyboard catchall"
      30.082 Power Button: always reports core events
      30.082 Power Button: Device: "/dev/input/event0"
      30.100 Power Button: Found keys
      30.100 Power Button: Configuring as keyboard
      30.100 XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
      30.100 Option "xkb_rules" "evdev"
      30.100 Option "xkb_model" "evdev"
      30.100 Option "xkb_layout" "fr"
      30.100 Option "xkb_variant" "oss"
      30.101 config/udev: Adding input device LITEON Technology USB Multimedia Keyboard (/dev/input/event2)
      30.101 LITEON Technology USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
      30.101 LITEON Technology USB Multimedia Keyboard: always reports core events
      30.101 LITEON Technology USB Multimedia Keyboard: Device: "/dev/input/event2"
      30.120 LITEON Technology USB Multimedia Keyboard: Found keys
      30.120 LITEON Technology USB Multimedia Keyboard: Configuring as keyboard
      30.120 XINPUT: Adding extended input device "LITEON Technology USB Multimedia Keyboard" (type: KEYBOARD)
      30.120 Option "xkb_rules" "evdev"
      30.120 Option "xkb_model" "evdev"
      30.120 Option "xkb_layout" "fr"
      30.120 Option "xkb_variant" "oss"
      30.120 config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event3)
      30.120 Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
      30.120 Logitech USB-PS/2 Optical Mouse: always reports core events
      30.120 Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event3"
      30.131 Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
      30.131 Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
      30.131 Logitech USB-PS/2 Optical Mouse: Found relative axes
      30.131 Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
      30.131 Logitech USB-PS/2 Optical Mouse: Configuring as mouse
      30.131 Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
      30.131 Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
      30.131 XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
      30.131 Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
      30.131 config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
      30.131 No input driver/identifier specified (ignoring)
      30.171 fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
      37.847 fglrx(0): EDID vendor "BNQ", prod id 30402
      37.847 fglrx(0): Using EDID range info for horizontal sync
      37.847 fglrx(0): Using EDID range info for vertical refresh
      37.847 fglrx(0): Printing DDC gathered Modelines:
      37.847 fglrx(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
      37.847 fglrx(0): Modeline "640x350"x0.0 25.17 640 656 752 800 350 387 389 449 +hsync -vsync (31.5 kHz)
      37.847 fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
      37.847 fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
      37.847 fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
      37.847 fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
      37.847 fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
      37.847 fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
      37.847 fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
      37.847 fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
      37.847 fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
      37.847 fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
      37.847 fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
      37.847 fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
      37.847 fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
      45.208 fglrx(0): EDID vendor "BNQ", prod id 30402
      45.208 fglrx(0): Using hsync ranges from config file
      45.208 fglrx(0): Using vrefresh ranges from config file
      45.208 fglrx(0): Printing DDC gathered Modelines:
      45.208 fglrx(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
      45.208 fglrx(0): Modeline "640x350"x0.0 25.17 640 656 752 800 350 387 389 449 +hsync -vsync (31.5 kHz)
      45.208 fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
      45.208 fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
      45.208 fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
      45.208 fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
      45.208 fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
      45.208 fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
      45.208 fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
      45.208 fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
      45.208 fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
      45.208 fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
      45.208 fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
      45.208 fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
      45.208 fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)

Suivre le flux des commentaires

Note : les commentaires appartiennent à celles et ceux qui les ont postés. Nous n’en sommes pas responsables.