Yann MICHALAK a écrit 2 commentaires

Salut et merci à tous pour vos conseils que je vais mettre en pratique dés que j'aurai créer une image de ce P _ _ _ _ N de macbook.

Alors en complément :

Mixer utilisé : Kmix

Pas de son quand je veux lire un fichier m4a avec totem pourtant la lecture s'écoule et donc les images défilent.
Pas de son quand je veux lire un fichier audio avec noatum, etc......

Voici les résultats des commandes que vous m'aviez conseillé d'exécuter , si vous pouvez m'aider à les déchiffrer :-))

Commande LSPCI -N

00:00.0 0600: 10de:0a82 (rev b1)
00:00.1 0500: 10de:0a88 (rev b1)
00:03.0 0601: 10de:0aae (rev b3)
00:03.1 0500: 10de:0aa4 (rev b1)
00:03.2 0c05: 10de:0aa2 (rev b1)
00:03.3 0500: 10de:0a89 (rev b1)
00:03.4 0500: 10de:0a98 (rev b1)
00:03.5 0b40: 10de:0aa3 (rev b1)
00:04.0 0c03: 10de:0aa5 (rev b1)
00:04.1 0c03: 10de:0aa6 (rev b1)
00:06.0 0c03: 10de:0aa7 (rev b1)
00:06.1 0c03: 10de:0aa9 (rev b1)
00:08.0 0403: 10de:0ac0 (rev b1)
00:09.0 0604: 10de:0aab (rev b1)
00:0a.0 0200: 10de:0ab0 (rev b1)
00:0b.0 0101: 10de:0ab5 (rev b1)
00:10.0 0604: 10de:0aa0 (rev b1)
00:15.0 0604: 10de:0ac6 (rev b1)
00:16.0 0604: 10de:0ac7 (rev b1)
02:00.0 0300: 10de:0866 (rev b1)
03:00.0 0280: 14e4:432b (rev 01)
04:00.0 0c00: 11c1:5903 (rev 07)



Commande LSMOD

Module Size Used by
vfat 46529 0
fat 85873 1 vfat
usb_storage 118561 0
autofs4 63049 2
i2c_dev 43977 0
i2c_core 56129 1 i2c_dev
hidp 83521 2
l2cap 89281 5 hidp
lockd 101297 0
sunrpc 198537 2 lockd
ip_conntrack_ftp 41361 0
ip_conntrack_netbios_ns 36033 0
ipt_REJECT 38977 1
xt_state 35265 7
ip_conntrack 91621 3 ip_conntrack_ftp,ip_conntrack_netbios_ns,xt_state
nfnetlink 40457 1 ip_conntrack
iptable_filter 36161 1
ip_tables 55201 1 iptable_filter
ip6t_REJECT 38849 1
xt_tcpudp 36289 20
ip6table_filter 36033 1
ip6_tables 50049 1 ip6table_filter
x_tables 50505 6 ipt_REJECT,xt_state,ip_tables,ip6t_REJECT,xt_tcpudp,ip6_tables
dm_mirror 54737 0
dm_multipath 56153 0
scsi_dh 41665 1 dm_multipath
ipv6 432161 19 ip6t_REJECT
xfrm_nalgo 43333 1 ipv6
crypto_api 42945 1 xfrm_nalgo
parport_pc 62313 0
lp 47121 0
parport 73165 2 parport_pc,lp
sr_mod 50789 0
cdrom 68713 1 sr_mod
snd_hda_intel 584593 4
sg 70377 0
shpchp 70892 0
snd_seq_dummy 37061 0
snd_seq_oss 65473 0
snd_seq_midi_event 41025 1 snd_seq_oss
snd_seq 87777 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 41557 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 77377 0
snd_mixer_oss 49985 1 snd_pcm_oss
snd_pcm 116681 3 snd_hda_intel,snd_pcm_oss
pcspkr 36289 0
snd_timer 57161 3 snd_seq,snd_pcm
snd_page_alloc 44113 2 snd_hda_intel,snd_pcm
forcedeth 93968 0
snd_hwdep 43593 1 snd_hda_intel
hci_usb 51293 0
snd 100073 15 snd_hda_intel,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep
bluetooth 118853 3 hidp,l2cap,hci_usb
soundcore 41825 1 snd
dm_raid45 99657 0
dm_message 36289 1 dm_raid45
dm_region_hash 46145 1 dm_raid45
dm_log 44993 3 dm_mirror,dm_raid45,dm_region_hash
dm_mod 101521 4 dm_mirror,dm_multipath,dm_raid45,dm_log
dm_mem_cache 38977 1 dm_raid45
ahci 69449 2
libata 209489 1 ahci
sd_mod 56513 3
scsi_mod 196697 6 usb_storage,scsi_dh,sr_mod,sg,libata,sd_mod
ext3 168401 1
jbd 94385 1 ext3
uhci_hcd 57433 0
ohci_hcd 55925 0
ehci_hcd 66253 0



Commande DMESG



Linux version 2.6.18-164.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Thu Sep 3 03:28:30 EDT 2009
Command line: ro root=LABEL=/1 acpi=off rhgb quiet
BIOS-provided physical RAM map:
BIOS-e820: 0000000000010000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000080000000 (usable)
BIOS-e820: 0000000080000000 - 0000000090000000 (reserved)
BIOS-e820: 0000000090000000 - 00000000be830000 (usable)
BIOS-e820: 00000000be830000 - 00000000be834000 (ACPI NVS)
BIOS-e820: 00000000be834000 - 00000000be84f000 (ACPI data)
BIOS-e820: 00000000be84f000 - 00000000bea50000 (ACPI NVS)
BIOS-e820: 00000000bea50000 - 00000000bfec6000 (ACPI data)
BIOS-e820: 00000000bfec6000 - 00000000bfec8000 (ACPI NVS)
BIOS-e820: 00000000bfec8000 - 00000000bfec9000 (ACPI data)
BIOS-e820: 00000000bfec9000 - 00000000bfecb000 (ACPI NVS)
BIOS-e820: 00000000bfecb000 - 00000000bfecd000 (ACPI data)
BIOS-e820: 00000000bfecd000 - 00000000bfedf000 (ACPI NVS)
BIOS-e820: 00000000bfedf000 - 00000000bfef9000 (ACPI data)
BIOS-e820: 00000000bfef9000 - 00000000bfeff000 (reserved)
BIOS-e820: 00000000bfeff000 - 00000000bff00000 (ACPI data)
BIOS-e820: 00000000d3400000 - 00000000d3401000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.4 present.
No NUMA configuration found
Faking a node at 0000000000000000-0000000140000000
Bootmem setup node 0 0000000000000000-0000000140000000
No mptable found.
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
On node 0 totalpages: 957625
DMA zone: 2641 pages, LIFO batch:0
DMA32 zone: 696424 pages, LIFO batch:31
Normal zone: 258560 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e0000
Nosave address range: 00000000000e0000 - 0000000000100000
Nosave address range: 0000000080000000 - 0000000090000000
Nosave address range: 00000000be830000 - 00000000be834000
Nosave address range: 00000000be834000 - 00000000be84f000
Nosave address range: 00000000be84f000 - 00000000bea50000
Nosave address range: 00000000bea50000 - 00000000bfec6000
Nosave address range: 00000000bfec6000 - 00000000bfec8000
Nosave address range: 00000000bfec8000 - 00000000bfec9000
Nosave address range: 00000000bfec9000 - 00000000bfecb000
Nosave address range: 00000000bfecb000 - 00000000bfecd000
Nosave address range: 00000000bfecd000 - 00000000bfedf000
Nosave address range: 00000000bfedf000 - 00000000bfef9000
Nosave address range: 00000000bfef9000 - 00000000bfeff000
Nosave address range: 00000000bfeff000 - 00000000bff00000
Nosave address range: 00000000bff00000 - 00000000d3400000
Nosave address range: 00000000d3400000 - 00000000d3401000
Nosave address range: 00000000d3401000 - 00000000f0000000
Nosave address range: 00000000f0000000 - 00000000f4000000
Nosave address range: 00000000f4000000 - 00000000fec00000
Nosave address range: 00000000fec00000 - 00000000fec01000
Nosave address range: 00000000fec01000 - 00000000fee00000
Nosave address range: 00000000fee00000 - 00000000fee01000
Nosave address range: 00000000fee01000 - 00000000ffc00000
Nosave address range: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at d4000000 (gap: d3401000:1cbff000)
SMP: Allowing 0 CPUs, 0 hotplug CPUs
Built 1 zonelists. Total pages: 957625
Kernel command line: ro root=LABEL=/1 acpi=off rhgb quiet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
ACPI: DMAR not present
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x1623000 - 0x5623000
Memory: 3755384k/5242880k available (2547k kernel code, 151940k reserved, 1289k data, 208k init)
Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.02 BogoMIPS (lpj=2128012)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
SMP alternatives: switching to UP code
Freeing SMP alternatives: 32k freed
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Using local APIC timer interrupts.
result 16625087
Detected 16.625 MHz APIC timer.
testing NMI watchdog ... OK.
SMP disabled
Brought up 1 CPUs
testing NMI watchdog ... OK.
time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer.
time.c: Detected 2128.012 MHz processor.
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=248 bytes
checking if image is initramfs... it is
Freeing initrd memory: 2558k freed
NET: Registered protocol family 16
PCI: Using configuration type 1
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
PCI: Discovered primary peer bus ff [IRQ]
PCI: Using IRQ router default [10de/0aa4] at 0000:00:03.1
PCI: Cannot allocate resource region 0 of device 0000:00:03.5
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: DMAR not present
PCI-GART: No AMD northbridge found.
PCI: Bridge: 0000:00:09.0
IO window: disabled.
MEM window: d3300000-d33fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:10.0
IO window: 1000-1fff
MEM window: d2000000-d30fffff
PREFETCH window 0x00000000c0000000-0x00000000d1ffffff
PCI: Bridge: 0000:00:15.0
IO window: disabled.
MEM window: d3200000-d32fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:16.0
IO window: disabled.
MEM window: d3100000-d31fffff
PREFETCH window: disabled.
PCI: Enabling device 0000:00:09.0 (0000 -> 0002)
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:10.0 to 64
PCI: No IRQ known for interrupt pin A of device 0000:00:15.0. Please try using pci=biosirq.
PCI: Setting latency timer of device 0000:00:15.0 to 64
PCI: No IRQ known for interrupt pin A of device 0000:00:16.0. Please try using pci=biosirq.
PCI: Setting latency timer of device 0000:00:16.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1253164362.435:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 57F09578A977B70E
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:02:00.0
PCI: No IRQ known for interrupt pin A of device 0000:00:15.0. Please try using pci=biosirq.
PCI: Setting latency timer of device 0000:00:15.0 to 64
pcie_portdrv_probe->Dev[0ac6:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:15.0:pcie00]
PCI: No IRQ known for interrupt pin A of device 0000:00:16.0. Please try using pci=biosirq.
PCI: Setting latency timer of device 0000:00:16.0 to 64
pcie_portdrv_probe->Dev[0ac7:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:16.0:pcie00]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Initalizing network drop monitor service
Freeing unused kernel memory: 208k freed
Write protecting the kernel read-only data: 496k
PCI: Setting latency timer of device 0000:00:04.1 to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:04.1: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:04.1
ehci_hcd 0000:00:04.1: irq 10, io mem 0xd3489200
ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 7 ports detected
PCI: Setting latency timer of device 0000:00:06.1 to 64
ehci_hcd 0000:00:06.1: EHCI Host Controller
ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:06.1: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:06.1
ehci_hcd 0000:00:06.1: irq 5, io mem 0xd3489100
ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
PCI: Setting latency timer of device 0000:00:04.0 to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:04.0: irq 11, io mem 0xd3488000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 7 ports detected
usb 1-4: new high speed USB device using ehci_hcd and address 2
PCI: Setting latency timer of device 0000:00:06.0 to 64
ohci_hcd 0000:00:06.0: OHCI Host Controller
ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:06.0: irq 7, io mem 0xd3487000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
usb 1-4: configuration #1 chosen from 1 choice
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:0b.0: version 3.0
usb 3-5: new low speed USB device using ohci_hcd and address 2
usb 3-5: configuration #1 chosen from 1 choice
input: Apple Computer, Inc. IR Receiver as /class/input/input0
input: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:04.0-5
usb 3-6: new full speed USB device using ohci_hcd and address 3
ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl IDE mode
ahci 0000:00:0b.0: flags: 64bit ncq sntf pm led pmp pio slum part
PCI: Setting latency timer of device 0000:00:0b.0 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m8192@0xd3484000 port 0xd3484100 irq 81
ata2: SATA max UDMA/133 abar m8192@0xd3484000 port 0xd3484180 irq 81
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
usb 3-6: configuration #1 chosen from 1 choice
input: Apple Inc. Apple Internal Keyboard / Trackpad as /class/input/input1
input: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6
input: Apple Inc. Apple Internal Keyboard / Trackpad as /class/input/input2
input: USB HID v1.11 Mouse [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6
input: Apple Inc. Apple Internal Keyboard / Trackpad as /class/input/input3
input: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6
ohci_hcd 0000:00:06.0: wakeup
usb 4-1: new full speed USB device using ohci_hcd and address 2
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: FUJITSU MHZ2160BH FFS G1, 00810091, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/100
usb 4-1: configuration #1 chosen from 1 choice
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 3 ports detected
usb 4-1.1: new full speed USB device using ohci_hcd and address 3
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: HL-DT-ST DVDRW GS22N, CP06, max UDMA/133, ATAPI AN
ata2.00: configured for UDMA/133
Vendor: ATA Model: FUJITSU MHZ2160B Rev: 0081
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda:<6>usb 4-1.1: configuration #1 chosen from 1 choice
usb 4-1.2: new full speed USB device using ohci_hcd and address 4
usb 4-1.2: configuration #1 chosen from 1 choice
input: HID 05ac:820a as /class/input/input4
input: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:06.0-1.2
sda1 sda2 sda3 sda4 sda5
sd 0:0:0:0: Attached scsi disk sda
Vendor: HL-DT-ST Model: DVDRW GS22N Rev: CP06
Type: CD-ROM ANSI SCSI revision: 05
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
device-mapper: dm-raid45: initialized v0.2594l
usb 4-1.3: new full speed USB device using ohci_hcd and address 5
usb 4-1.3: configuration #1 chosen from 1 choice
input: HID 05ac:820b as /class/input/input5
input: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:06.0-1.3
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 6 roles, 1914 types, 234 bools, 1 sens, 1024 cats
security: 61 classes, 69080 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda3, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1253164390.367:2): policy loaded auid=4294967295 ses=4294967295
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new driver hci_usb
input: PC Speaker as /class/input/input6
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.62-Driver Package V1.25.
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth: using HIGHDMA
eth0: forcedeth.c: subsystem: 010de:cb79 bound to 0000:00:0a.0
PCI: Setting latency timer of device 0000:00:08.0 to 64
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
input: HDA Digital PCBeep as /class/input/input7
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
floppy0: no floppy controllers found
lp: driver loaded but no devices found
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda3, internal journal
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 2229220k swap on /dev/sda5. Priority:-1 extents:1 across:2229220k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
ADDRCONF(NETDEV_UP): eth1: link is not ready
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
i2c /dev entries driver
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
ADDRCONF(NETDEV_UP): eth1: link is not ready

Salut et merci à tous pour vos conseils que je vais tester dans la journée après avoir créer une image du MAC ;-) On est jamais assez prudent !

Logiciel utilisé : Muse et tout autre issus de PLANET CCRMA, pour lire un fichier m4a (MPEG-4 Audio) avec TOTEM.
Lire un fichier audio avec Noatun.

Mixer utilisé : KMIX

Voici le résultat de la commande DMESG :


Linux version 2.6.18-164.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Thu Sep 3 03:28:30 EDT 2009
Command line: ro root=LABEL=/1 acpi=off rhgb quiet
BIOS-provided physical RAM map:
BIOS-e820: 0000000000010000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000080000000 (usable)
BIOS-e820: 0000000080000000 - 0000000090000000 (reserved)
BIOS-e820: 0000000090000000 - 00000000be830000 (usable)
BIOS-e820: 00000000be830000 - 00000000be834000 (ACPI NVS)
BIOS-e820: 00000000be834000 - 00000000be84f000 (ACPI data)
BIOS-e820: 00000000be84f000 - 00000000bea50000 (ACPI NVS)
BIOS-e820: 00000000bea50000 - 00000000bfec6000 (ACPI data)
BIOS-e820: 00000000bfec6000 - 00000000bfec8000 (ACPI NVS)
BIOS-e820: 00000000bfec8000 - 00000000bfec9000 (ACPI data)
BIOS-e820: 00000000bfec9000 - 00000000bfecb000 (ACPI NVS)
BIOS-e820: 00000000bfecb000 - 00000000bfecd000 (ACPI data)
BIOS-e820: 00000000bfecd000 - 00000000bfedf000 (ACPI NVS)
BIOS-e820: 00000000bfedf000 - 00000000bfef9000 (ACPI data)
BIOS-e820: 00000000bfef9000 - 00000000bfeff000 (reserved)
BIOS-e820: 00000000bfeff000 - 00000000bff00000 (ACPI data)
BIOS-e820: 00000000d3400000 - 00000000d3401000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.4 present.
No NUMA configuration found
Faking a node at 0000000000000000-0000000140000000
Bootmem setup node 0 0000000000000000-0000000140000000
No mptable found.
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
On node 0 totalpages: 957625
DMA zone: 2641 pages, LIFO batch:0
DMA32 zone: 696424 pages, LIFO batch:31
Normal zone: 258560 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e0000
Nosave address range: 00000000000e0000 - 0000000000100000
Nosave address range: 0000000080000000 - 0000000090000000
Nosave address range: 00000000be830000 - 00000000be834000
Nosave address range: 00000000be834000 - 00000000be84f000
Nosave address range: 00000000be84f000 - 00000000bea50000
Nosave address range: 00000000bea50000 - 00000000bfec6000
Nosave address range: 00000000bfec6000 - 00000000bfec8000
Nosave address range: 00000000bfec8000 - 00000000bfec9000
Nosave address range: 00000000bfec9000 - 00000000bfecb000
Nosave address range: 00000000bfecb000 - 00000000bfecd000
Nosave address range: 00000000bfecd000 - 00000000bfedf000
Nosave address range: 00000000bfedf000 - 00000000bfef9000
Nosave address range: 00000000bfef9000 - 00000000bfeff000
Nosave address range: 00000000bfeff000 - 00000000bff00000
Nosave address range: 00000000bff00000 - 00000000d3400000
Nosave address range: 00000000d3400000 - 00000000d3401000
Nosave address range: 00000000d3401000 - 00000000f0000000
Nosave address range: 00000000f0000000 - 00000000f4000000
Nosave address range: 00000000f4000000 - 00000000fec00000
Nosave address range: 00000000fec00000 - 00000000fec01000
Nosave address range: 00000000fec01000 - 00000000fee00000
Nosave address range: 00000000fee00000 - 00000000fee01000
Nosave address range: 00000000fee01000 - 00000000ffc00000
Nosave address range: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at d4000000 (gap: d3401000:1cbff000)
SMP: Allowing 0 CPUs, 0 hotplug CPUs
Built 1 zonelists. Total pages: 957625
Kernel command line: ro root=LABEL=/1 acpi=off rhgb quiet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
ACPI: DMAR not present
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x1623000 - 0x5623000
Memory: 3755384k/5242880k available (2547k kernel code, 151940k reserved, 1289k data, 208k init)
Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.02 BogoMIPS (lpj=2128012)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
SMP alternatives: switching to UP code
Freeing SMP alternatives: 32k freed
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Using local APIC timer interrupts.
result 16625087
Detected 16.625 MHz APIC timer.
testing NMI watchdog ... OK.
SMP disabled
Brought up 1 CPUs
testing NMI watchdog ... OK.
time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer.
time.c: Detected 2128.012 MHz processor.
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=248 bytes
checking if image is initramfs... it is
Freeing initrd memory: 2558k freed
NET: Registered protocol family 16
PCI: Using configuration type 1
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
PCI: Discovered primary peer bus ff [IRQ]
PCI: Using IRQ router default [10de/0aa4] at 0000:00:03.1
PCI: Cannot allocate resource region 0 of device 0000:00:03.5
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: DMAR not present
PCI-GART: No AMD northbridge found.
PCI: Bridge: 0000:00:09.0
IO window: disabled.
MEM window: d3300000-d33fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:10.0
IO window: 1000-1fff
MEM window: d2000000-d30fffff
PREFETCH window 0x00000000c0000000-0x00000000d1ffffff
PCI: Bridge: 0000:00:15.0
IO window: disabled.
MEM window: d3200000-d32fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:16.0
IO window: disabled.
MEM window: d3100000-d31fffff
PREFETCH window: disabled.
PCI: Enabling device 0000:00:09.0 (0000 -> 0002)
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:10.0 to 64
PCI: No IRQ known for interrupt pin A of device 0000:00:15.0. Please try using pci=biosirq.
PCI: Setting latency timer of device 0000:00:15.0 to 64
PCI: No IRQ known for interrupt pin A of device 0000:00:16.0. Please try using pci=biosirq.
PCI: Setting latency timer of device 0000:00:16.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1253164362.435:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 57F09578A977B70E
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:02:00.0
PCI: No IRQ known for interrupt pin A of device 0000:00:15.0. Please try using pci=biosirq.
PCI: Setting latency timer of device 0000:00:15.0 to 64
pcie_portdrv_probe->Dev[0ac6:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:15.0:pcie00]
PCI: No IRQ known for interrupt pin A of device 0000:00:16.0. Please try using pci=biosirq.
PCI: Setting latency timer of device 0000:00:16.0 to 64
pcie_portdrv_probe->Dev[0ac7:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:16.0:pcie00]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Initalizing network drop monitor service
Freeing unused kernel memory: 208k freed
Write protecting the kernel read-only data: 496k
PCI: Setting latency timer of device 0000:00:04.1 to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:04.1: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:04.1
ehci_hcd 0000:00:04.1: irq 10, io mem 0xd3489200
ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 7 ports detected
PCI: Setting latency timer of device 0000:00:06.1 to 64
ehci_hcd 0000:00:06.1: EHCI Host Controller
ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:06.1: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:06.1
ehci_hcd 0000:00:06.1: irq 5, io mem 0xd3489100
ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
PCI: Setting latency timer of device 0000:00:04.0 to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:04.0: irq 11, io mem 0xd3488000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 7 ports detected
usb 1-4: new high speed USB device using ehci_hcd and address 2
PCI: Setting latency timer of device 0000:00:06.0 to 64
ohci_hcd 0000:00:06.0: OHCI Host Controller
ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:06.0: irq 7, io mem 0xd3487000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
usb 1-4: configuration #1 chosen from 1 choice
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:0b.0: version 3.0
usb 3-5: new low speed USB device using ohci_hcd and address 2
usb 3-5: configuration #1 chosen from 1 choice
input: Apple Computer, Inc. IR Receiver as /class/input/input0
input: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:04.0-5
usb 3-6: new full speed USB device using ohci_hcd and address 3
ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl IDE mode
ahci 0000:00:0b.0: flags: 64bit ncq sntf pm led pmp pio slum part
PCI: Setting latency timer of device 0000:00:0b.0 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m8192@0xd3484000 port 0xd3484100 irq 81
ata2: SATA max UDMA/133 abar m8192@0xd3484000 port 0xd3484180 irq 81
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
usb 3-6: configuration #1 chosen from 1 choice
input: Apple Inc. Apple Internal Keyboard / Trackpad as /class/input/input1
input: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6
input: Apple Inc. Apple Internal Keyboard / Trackpad as /class/input/input2
input: USB HID v1.11 Mouse [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6
input: Apple Inc. Apple Internal Keyboard / Trackpad as /class/input/input3
input: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6
ohci_hcd 0000:00:06.0: wakeup
usb 4-1: new full speed USB device using ohci_hcd and address 2
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: FUJITSU MHZ2160BH FFS G1, 00810091, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/100
usb 4-1: configuration #1 chosen from 1 choice
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 3 ports detected
usb 4-1.1: new full speed USB device using ohci_hcd and address 3
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: HL-DT-ST DVDRW GS22N, CP06, max UDMA/133, ATAPI AN
ata2.00: configured for UDMA/133
Vendor: ATA Model: FUJITSU MHZ2160B Rev: 0081
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda:<6>usb 4-1.1: configuration #1 chosen from 1 choice
usb 4-1.2: new full speed USB device using ohci_hcd and address 4
usb 4-1.2: configuration #1 chosen from 1 choice
input: HID 05ac:820a as /class/input/input4
input: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:06.0-1.2
sda1 sda2 sda3 sda4 sda5
sd 0:0:0:0: Attached scsi disk sda
Vendor: HL-DT-ST Model: DVDRW GS22N Rev: CP06
Type: CD-ROM ANSI SCSI revision: 05
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
device-mapper: dm-raid45: initialized v0.2594l
usb 4-1.3: new full speed USB device using ohci_hcd and address 5
usb 4-1.3: configuration #1 chosen from 1 choice
input: HID 05ac:820b as /class/input/input5
input: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:06.0-1.3
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 6 roles, 1914 types, 234 bools, 1 sens, 1024 cats
security: 61 classes, 69080 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda3, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1253164390.367:2): policy loaded auid=4294967295 ses=4294967295
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new driver hci_usb
input: PC Speaker as /class/input/input6
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.62-Driver Package V1.25.
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth: using HIGHDMA
eth0: forcedeth.c: subsystem: 010de:cb79 bound to 0000:00:0a.0
PCI: Setting latency timer of device 0000:00:08.0 to 64
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
input: HDA Digital PCBeep as /class/input/input7
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
floppy0: no floppy controllers found
lp: driver loaded but no devices found
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda3, internal journal
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 2229220k swap on /dev/sda5. Priority:-1 extents:1 across:2229220k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
ADDRCONF(NETDEV_UP): eth1: link is not ready
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
i2c /dev entries driver
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
ADDRCONF(NETDEV_UP): eth1: link is not ready






Voici le résultat de la commande LSMOD :


Module Size Used by
vfat 46529 0
fat 85873 1 vfat
usb_storage 118561 0
autofs4 63049 2
i2c_dev 43977 0
i2c_core 56129 1 i2c_dev
hidp 83521 2
l2cap 89281 5 hidp
lockd 101297 0
sunrpc 198537 2 lockd
ip_conntrack_ftp 41361 0
ip_conntrack_netbios_ns 36033 0
ipt_REJECT 38977 1
xt_state 35265 7
ip_conntrack 91621 3 ip_conntrack_ftp,ip_conntrack_netbios_ns,xt_state
nfnetlink 40457 1 ip_conntrack
iptable_filter 36161 1
ip_tables 55201 1 iptable_filter
ip6t_REJECT 38849 1
xt_tcpudp 36289 20
ip6table_filter 36033 1
ip6_tables 50049 1 ip6table_filter
x_tables 50505 6 ipt_REJECT,xt_state,ip_tables,ip6t_REJECT,xt_tcpudp,ip6_tables
dm_mirror 54737 0
dm_multipath 56153 0
scsi_dh 41665 1 dm_multipath
ipv6 432161 19 ip6t_REJECT
xfrm_nalgo 43333 1 ipv6
crypto_api 42945 1 xfrm_nalgo
parport_pc 62313 0
lp 47121 0
parport 73165 2 parport_pc,lp
sr_mod 50789 0
cdrom 68713 1 sr_mod
snd_hda_intel 584593 4
sg 70377 0
shpchp 70892 0
snd_seq_dummy 37061 0
snd_seq_oss 65473 0
snd_seq_midi_event 41025 1 snd_seq_oss
snd_seq 87777 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 41557 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 77377 0
snd_mixer_oss 49985 1 snd_pcm_oss
snd_pcm 116681 3 snd_hda_intel,snd_pcm_oss
pcspkr 36289 0
snd_timer 57161 3 snd_seq,snd_pcm
snd_page_alloc 44113 2 snd_hda_intel,snd_pcm
forcedeth 93968 0
snd_hwdep 43593 1 snd_hda_intel
hci_usb 51293 0
snd 100073 15 snd_hda_intel,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep
bluetooth 118853 3 hidp,l2cap,hci_usb
soundcore 41825 1 snd
dm_raid45 99657 0
dm_message 36289 1 dm_raid45
dm_region_hash 46145 1 dm_raid45
dm_log 44993 3 dm_mirror,dm_raid45,dm_region_hash
dm_mod 101521 4 dm_mirror,dm_multipath,dm_raid45,dm_log
dm_mem_cache 38977 1 dm_raid45
ahci 69449 2
libata 209489 1 ahci
sd_mod 56513 3
scsi_mod 196697 6 usb_storage,scsi_dh,sr_mod,sg,libata,sd_mod
ext3 168401 1
jbd 94385 1 ext3
uhci_hcd 57433 0
ohci_hcd 55925 0
ehci_hcd 66253 0






Voici le résultat de la commande LSPCI -N :

00:00.0 0600: 10de:0a82 (rev b1)
00:00.1 0500: 10de:0a88 (rev b1)
00:03.0 0601: 10de:0aae (rev b3)
00:03.1 0500: 10de:0aa4 (rev b1)
00:03.2 0c05: 10de:0aa2 (rev b1)
00:03.3 0500: 10de:0a89 (rev b1)
00:03.4 0500: 10de:0a98 (rev b1)
00:03.5 0b40: 10de:0aa3 (rev b1)
00:04.0 0c03: 10de:0aa5 (rev b1)
00:04.1 0c03: 10de:0aa6 (rev b1)
00:06.0 0c03: 10de:0aa7 (rev b1)
00:06.1 0c03: 10de:0aa9 (rev b1)
00:08.0 0403: 10de:0ac0 (rev b1)
00:09.0 0604: 10de:0aab (rev b1)
00:0a.0 0200: 10de:0ab0 (rev b1)
00:0b.0 0101: 10de:0ab5 (rev b1)
00:10.0 0604: 10de:0aa0 (rev b1)
00:15.0 0604: 10de:0ac6 (rev b1)
00:16.0 0604: 10de:0ac7 (rev b1)
02:00.0 0300: 10de:0866 (rev b1)
03:00.0 0280: 14e4:432b (rev 01)
04:00.0 0c00: 11c1:5903 (rev 07)