alfafa a écrit 100 commentaires

  • [^] # Re: Resolution ecran, Out of range

    Posté par  . En réponse au message Xorg : sélectionner les résolution. Évalué à 1.

    Désignation : BELINEA 2025 S1
    Moniteur LCD 20.1" (51 cm)
    Date de sortie (approx.) : Juillet 2006
    Caractéristiques techniques de la Dalle de l'écran LCD BELINEA 2025 S1
    Technologies : TFT TN + Film
    Rétroéclairage : Tubes fluorescents
    Aspect (ratio) : 4:3
    Surface visible : 20.1" (51 cm)
    Résolution / Fréquence : 1400 x 1050
    Temps de réponse : 8 ms
    Pas de pixel (pitch) : 0.292 mm
    Luminosité : 300 cd/m²
    Taux de contraste : 700 : 1
    Couleurs : 16.2 millions
    Angle de vision Horiz. : 160°
    Angle de vision Vert. : 160°
    Synch. Vert. Analogique : Mini : 50 Hz / Maxi : 85 Hz
    Synch. Hor. Analogique : Mini : 30 kHz / Maxi : 83 kHz
    BP Vidéo Analogique : 162 MHz

    Résolutions disponibles
    - 640 x 480 @ 85
    - 800 x 600 @ 85
    - 1024 x 768 @ 85
    - 1152 x 864 @ 85
    - 1280 x 1024 @ 75
    - 1400 x 1050 @ 75

  • [^] # Re: Programmation des enregistrements

    Posté par  . En réponse à la dépêche FreetuxTV 0.5.1 est disponible. Évalué à 2.

    Qmagneto : http://code.google.com/p/qmagneto/
    C'est super.
    Chez moi, il marche mieux en le paramétrant avec VLC.

    Fricorder : http://manatlan.online.fr/fricorder.php
    C'est celui que j'utilisais avant Qmagneto. Marche nickel

  • # Quelques trucs juste

    Posté par  . En réponse au message Je vous propose un regard différent sur ce merveilleux systèmes qu'est Linux. Évalué à -2.

    J'aime bien lire ce genre de critique, je trouve ça instructif.
    Ca nous sort de notre nombrilisme.
    Ne reconnaitre aucun défaut à Linux c'est vraiment être aveugle, comme sur tout système...
    Ne reconnaitre aucun avantage n'est pas mieux.

    La conclusion est : Linux n'est pas pour le poste de travail. Rien n'est mentionné pour la partie serveur sur lesquels il occupe une grande part de marché.
    De nombreuses formations d'administrateur laissent une part de plus en plus importante à Linux, reflet d'un besoin ?

    Linux est pour moi la plus grande source d'innovation, car c'est un laboratoire de passionnés. Les idées sont souvent reprise ailleurs avant d'arriver à maturité, car sans modèle économique, c'est difficile à percer !

  • [^] # Re: ben des jeux !

    Posté par  . En réponse au message Jeux pour enfants de 4 à 8 ans. Évalué à 1.

    Je veux comme tout parent leurs proposer ce qu'il y a de meilleur...
    Éduquer des enfants, c'est leur apprendre à faire des choix, a avoir des repères. En matière de jeux, je ne veux pas qu'ils jouent à n'importe quoi.
    Certains jeux sont aliénant d'autre ont une part d'apprentissage intéressante. Mes enfants ne sont pas en age pour faire la part des choses.

    Je suis exigent en éducation comme pour mes PC, c'est pour cela que j'ai choisi le libre.

  • [^] # Re: ben des jeux !

    Posté par  . En réponse au message Jeux pour enfants de 4 à 8 ans. Évalué à 1.

    C'est justement par ce que je veux pas tous les essayer que je vous demande conseil.
    Les jeux du type crackattack sont limite pour mon ainé, car c'est très stressant, car ça s'accélère. Pour les enfants il faut quelque chose de plus calme.
    Les jeux de solitaire ne sont pas suffisement excitant pour des enfants.

  • [^] # Re: Libres de faire du libre

    Posté par  . En réponse au message Jeux pour enfants de 4 à 8 ans. Évalué à 1.

    C'est une bonne idée la prog.
    Mais ce sont déjà des fous de boulot, alors je veux les obliger à se détendre ;-)

    Sur http://hacketyhack.lejeune.fr.eu.org/ il disent à partir de 13 ans et plus... C'est l'age à partir duquel j'ai commencé le GW Basic.

    Merci pour l'idée. Si vous en avez d'autres dans ce sens, je suis preneur, mais pour l'avenir...

  • [^] # Re: Et pourtant...

    Posté par  . En réponse au message Extraire les photos d'un scan. Évalué à 1.

    Moi aussi je suis un nostalgique du scanner AGFA. Je n'ai pas trouvé de logiciel plus pratique à ce jour.

  • [^] # Re: Linux serait donc sur la voie du desktop ?

    Posté par  . En réponse au message Linux responsable de spams ?. Évalué à 1.

    Display Mail User Agent
    https://addons.mozilla.org/fr/thunderbird/addon/562
    Très amusant de dire à quelqu'un qui t'a envoyé un mail, avec quel logiciel il t'a envoyer un mail. Pratique surtout pour le dépannage...
    Bien sur, je

  • # Gooo ou OpenOffice.org

    Posté par  . En réponse au message Gros problème avec Openoffice.org et l'importation des commentaires/notes. Évalué à 1.

    J'ai été confronté à un problème avec openoffice.
    Je l'ai résolut en virant celui des dépots debian qui est en fait Gooo et en installant la version officielle du sites openoffice.org.

    Une piste à exploiter ?

  • [^] # Re: go-openoffice est aussi mis à jour

    Posté par  . En réponse à la dépêche OpenOffice.org 3.2 est disponible. Évalué à -1.

    Attention à Gooo.
    J'ai fait une macro pour ouvrir un fichier CSV.
    Elle ne marchait pas sous gooo.
    J'ai installé la version officiel sur ma lenny et depuis tout roule nickel...
    Depuis je reste fidèle à OOO.org

  • # Rarement = 1 fois ou 2

    Posté par  . En réponse au sondage J'utilise (Open|Free|net)BSD. Évalué à 2.

    J'ai installé une fois Desktop BSD et FreeBsd pour voir.
    C'est à l'époque ou je découvrais le monde des os libre et que je testais tout...

  • [^] # Re: Utilité du Réflex

    Posté par  . En réponse au sondage Mon appareil photo actuel est. Évalué à 1.

    Avoir un beau fond flou qui met en valeur un sujet.
    En jargon : avoir une faible profondeur de champs.

  • # Photo ou Image ?

    Posté par  . En réponse au sondage Mon appareil photo actuel est. Évalué à 4.

    Bonjour,
    Je suis encore à l'âge du reflex argentique, car j'ai un bon équipement qui me permet de prendre de vrai photo (un objectif 50mm ouverture 1,4 entre autre)

    J'ai beaucoup de mal avec les compact car pour moi il prennent des images plus que des photo. J'en ai un numérique que j'utilise très peu à cause de ça

    Le problème avec les photo numérique, c'est que c'est plus long à gérer que les photos argentique.
    On prend moins de temps pour prendre un photo, pour la composer... mais on en prend plus et il faut faire le tri après coup.

    Autre point important, c'est que les photos numérique restent souvent au fond du disque dur et ont une moins grande valeur que lorsqu'elle sont en papier palpable. On peux s'y attacher plus facilement.

    Attention, je commence à sombrer dans le troll...
    J'avoue que je rêve tout de même d'un reflex numérique mais mon budget ne me le permet pas.
    Leïca fait de très bon numérique...

  • # Machin dans une machine vitruelle

    Posté par  . En réponse au message Installer un double boot Debian + Machin. Évalué à 2.

    J'ai un double boot win+lenny.
    Sous lenny, j'ai une machine virtuelle avec virtualbox qui me permet de lancer les applications qui ne tournent que sous machin (scanner, une peu de photoshop). Cette machine virtuelle n'est pas connectée au réseau mais partages mes fichier perso.

    Résultat :
    Depuis 2 mois je n'ai jamais booté sur ma partition dédiée machin.

    C'est une idée non ?

  • # at

    Posté par  . En réponse au message Cron : sortir du mode veille. Évalué à 1.

    J'ai interprété.
    Il n'utilise pas cron, mais la commande at.
    cf : http://code.google.com/p/fricorder/

  • [^] # Re: update-alternatives

    Posté par  . En réponse au message Ouverture d'Epiphany à la place d'Iceweasel. Évalué à 1.

    J'ai vérifié les alternatives, elle sont OK.
    Le sélecteur d'application préféré est paramétré sur iceweasel pour le navigateur.
    C'est pour cela que je me pose la question.

  • [^] # Re: Problème de réinitialisation de ton matos [Résolu]

    Posté par  . En réponse au message Pb pm-suspend. Évalué à 1.

    J'ai trouvé mon problème.
    Il y avait une erreur dans le module forcedeth.
    Il faut donc créer un fichier :
    /etc/pm/config.d instead: 00sleep_module
    Contenant :

    SUSPEND_MODULES="forcedeth"

  • # Sur ce site bien sur

    Posté par  . En réponse au message Code long : barre d'ascenseur. Évalué à 1.

    J'ai oublié de préciser que cela concerne notre site bien aimé : Linuxfr.org

  • [^] # Re: Problème de réinitialisation de ton matos

    Posté par  . En réponse au message Pb pm-suspend. Évalué à 1.

    Voici donc mon lsmod :

    Module                  Size  Used by
    nvidia               8105072  34
    i2c_core               27936  1 nvidia
    vboxnetflt             91532  0
    vboxdrv              1688332  1 vboxnetflt
    ppdev                  11656  0
    lp                     14724  0
    ipv6                  288328  20
    cpufreq_conservative    11784  0
    cpufreq_stats           9120  0
    cpufreq_ondemand       11792  0
    cpufreq_powersave       6400  0
    cpufreq_userspace       8452  0
    freq_table              9344  2 cpufreq_stats,cpufreq_ondemand
    sbp2                   25356  0
    loop                   19468  0
    snd_hda_intel         436440  4
    snd_pcm                81672  2 snd_hda_intel
    snd_seq                54304  0
    snd_timer              25744  3 snd_pcm,snd_seq
    snd_seq_device         11668  1 snd_seq
    snd                    63688  11 snd_hda_intel,snd_pcm,snd_seq,snd_timer,snd_seq_device
    parport_pc             31016  1
    parport                41776  3 ppdev,lp,parport_pc
    usblp                  16896  0
    pcspkr                  7040  0
    soundcore              12064  1 snd
    snd_page_alloc         13072  2 snd_hda_intel,snd_pcm
    wmi                    11712  0
    button                 11680  0
    evdev                  14208  3
    ext3                  124944  2
    jbd                    51240  1 ext3
    mbcache                12804  1 ext3
    sg                     36576  0
    sr_mod                 19652  0
    sd_mod                 29376  4
    ide_cd_mod             36360  0
    cdrom                  37928  2 sr_mod,ide_cd_mod
    ata_generic            10116  0
    ahci                   33036  3
    libata                165600  2 ata_generic,ahci
    scsi_mod              160760  5 sbp2,sg,sr_mod,sd_mod,libata
    dock                   14112  1 libata
    usbhid                 45920  0
    hid                    41664  1 usbhid
    ff_memless              9224  1 usbhid
    amd74xx                13448  0 [permanent]
    ide_pci_generic         9220  0 [permanent]
    forcedeth              54032  0
    ide_core              128284  3 ide_cd_mod,amd74xx,ide_pci_generic
    ohci1394               32692  0
    ieee1394               93816  2 sbp2,ohci1394
    ehci_hcd               35980  0
    ohci_hcd               25092  0
    thermal                22816  0
    processor              42304  1 thermal
    fan                     9352  0
    thermal_sys            17728  3 thermal,processor,fan


    Le problème, c'est que je ne trouve pas le module de ma carte réseau.
    Ma carte mère est une Gigabyte GA-73PVM-S2H avec une carte réseau intégrée Realtek® RTL8211B.

    Voici le dmesg :



    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-15lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed May 13 15:37:46 UTC 2009
    [ 0.000000] Command line: root=/dev/sda2 ro quiet vga=791
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 0000000077000000 (usable)
    [ 0.000000] BIOS-e820: 0000000077000000 - 000000007f000000 (reserved)
    [ 0.000000] BIOS-e820: 000000007f000000 - 000000007fde0000 (usable)
    [ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e2000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
    [ 0.000000] Entering add_active_range(0, 256, 487424) 1 entries of 3200 used
    [ 0.000000] Entering add_active_range(0, 520192, 523744) 2 entries of 3200 used
    [ 0.000000] max_pfn_mapped = 1048576
    [ 0.000000] init_memory_mapping
    [ 0.000000] DMI 2.4 present.
    [ 0.000000] ACPI: RSDP 000F65A0, 0014 (r0 GBT )
    [ 0.000000] ACPI: RSDT 7FEE3040, 0034 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
    [ 0.000000] ACPI: FACP 7FEE30C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
    [ 0.000000] ACPI: DSDT 7FEE3180, 5301 (r1 GBT GBTUACPI 1000 MSFT 100000C)
    [ 0.000000] ACPI: FACS 7FEE1800, 0040
    [ 0.000000] ACPI: HPET 7FEE8600, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98)
    [ 0.000000] ACPI: MCFG 7FEE8680, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
    [ 0.000000] ACPI: APIC 7FEE8500, 0098 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000007fde0000
    [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
    [ 0.000000] Entering add_active_range(0, 256, 487424) 1 entries of 3200 used
    [ 0.000000] Entering add_active_range(0, 520192, 523744) 2 entries of 3200 used
    [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fde0000
    [ 0.000000] NODE_DATA [000000000000c000 - 0000000000010fff]
    [ 0.000000] bootmap [0000000000011000 - 0000000000020fbf] pages 10
    [ 0.000000] early res: 0 [0-fff] BIOS data page
    [ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
    [ 0.000000] early res: 2 [200000-673397] TEXT DATA BSS
    [ 0.000000] early res: 3 [3798d000-37fefc7b] RAMDISK
    [ 0.000000] early res: 4 [9f800-fffff] BIOS reserved
    [ 0.000000] early res: 5 [8000-bfff] PGTABLE
    [ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff810001200000-ffff810002dfffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0 -> 4096
    [ 0.000000] DMA32 4096 -> 1048576
    [ 0.000000] Normal 1048576 -> 1048576
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[3] active PFN ranges
    [ 0.000000] 0: 0 -> 159
    [ 0.000000] 0: 256 -> 487424
    [ 0.000000] 0: 520192 -> 523744
    [ 0.000000] On node 0 totalpages: 490879
    [ 0.000000] DMA zone: 56 pages used for memmap
    [ 0.000000] DMA zone: 1244 pages reserved
    [ 0.000000] DMA zone: 2699 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 7105 pages used for memmap
    [ 0.000000] DMA32 zone: 479775 pages, LIFO batch:31
    [ 0.000000] Normal zone: 0 pages used for memmap
    [ 0.000000] Movable zone: 0 pages used for memmap
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] ACPI: IRQ14 used by override.
    [ 0.000000] ACPI: IRQ15 used by override.
    [ 0.000000] Setting APIC routing to flat
    [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 0000000077000000 - 000000007f000000
    [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
    [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data
    [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 4
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 482474
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: root=/dev/sda2 ro quiet vga=791
    [ 0.000000] Initializing CPU#0
    [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
    [ 0.000000] TSC calibrated against PM_TIMER
    [ 0.000000] time.c: Detected 2499.999 MHz processor.
    [ 0.004000] spurious 8259A interrupt: IRQ7.
    [ 0.004000] Console: colour dummy device 80x25
    [ 0.004000] console [tty0] enabled
    [ 0.004000] Checking aperture...
    [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.004000] Memory: 1923388k/2094976k available (2225k kernel code, 40128k reserved, 1080k data, 392k init)
    [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
    [ 0.004000] hpet clockevent registered
    [ 0.083878] Calibrating delay using timer specific routine.. 5005.25 BogoMIPS (lpj=10010512)
    [ 0.083915] Security Framework initialized
    [ 0.083921] SELinux: Disabled at boot.
    [ 0.083924] Capability LSM initialized
    [ 0.084005] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.084005] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.084005] Mount-cache hash table entries: 256
    [ 0.084005] Initializing cgroup subsys ns
    [ 0.084005] Initializing cgroup subsys cpuacct
    [ 0.084005] Initializing cgroup subsys devices
    [ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K
    [ 0.084005] CPU: L2 cache: 2048K
    [ 0.084005] CPU 0/0 -> Node 0
    [ 0.084005] CPU: Physical Processor ID: 0
    [ 0.084005] CPU: Processor Core ID: 0
    [ 0.084005] CPU0: Thermal monitoring enabled (TM2)
    [ 0.084005] using mwait in idle threads.
    [ 0.084005] ACPI: Core revision 20080321
    [ 0.132008] CPU0: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 06
    [ 0.132008] Using local APIC timer interrupts.
    [ 0.136008] APIC timer calibration result 12499985
    [ 0.136008] Detected 12.499 MHz APIC timer.
    [ 0.136008] Booting processor 1/1 ip 6000
    [ 0.144009] Initializing CPU#1
    [ 0.144009] Calibrating delay using timer specific routine.. 4999.95 BogoMIPS (lpj=9999916)
    [ 0.144009] CPU: L1 I cache: 32K, L1 D cache: 32K
    [ 0.144009] CPU: L2 cache: 2048K
    [ 0.144009] CPU 1/1 -> Node 0
    [ 0.144009] CPU: Physical Processor ID: 0
    [ 0.144009] CPU: Processor Core ID: 1
    [ 0.144009] CPU1: Thermal monitoring enabled (TM2)
    [ 0.224014] CPU1: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 06
    [ 0.224014] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    [ 0.228014] Brought up 2 CPUs
    [ 0.228014] Total of 2 processors activated (10005.21 BogoMIPS).
    [ 0.228014] CPU0 attaching sched-domain:
    [ 0.228014] domain 0: span 0-1
    [ 0.228014] groups: 0 1
    [ 0.228014] domain 1: span 0-1
    [ 0.228014] groups: 0-1
    [ 0.228014] CPU1 attaching sched-domain:
    [ 0.228014] domain 0: span 0-1
    [ 0.228014] groups: 1 0
    [ 0.228014] domain 1: span 0-1
    [ 0.228014] groups: 0-1
    [ 0.228014] net_namespace: 1224 bytes
    [ 0.228014] Booting paravirtualized kernel on bare hardware
    [ 0.228014] NET: Registered protocol family 16
    [ 0.228014] ACPI: bus type pci registered
    [ 0.228014] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 31
    [ 0.228014] PCI: MCFG area at e0000000 reserved in E820
    [ 0.228014] PCI: Using MMCONFIG at e0000000 - e1ffffff
    [ 0.228014] PCI: Using configuration type 1 for base access
    [ 0.228014] mtrr: your CPUs had inconsistent fixed MTRR settings
    [ 0.228014] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.228014] mtrr: corrected configuration.
    [ 0.228014] ACPI: EC: Look up EC in DSDT
    [ 0.233960] ACPI: Interpreter enabled
    [ 0.233962] ACPI: (supports S0 S3 S4 S5)
    [ 0.233975] ACPI: Using IOAPIC for interrupt routing
    [ 0.244015] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [ 0.244015] PCI: Transparent bridge - 0000:00:0a.0
    [ 0.244015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.244015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    [ 0.284017] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.284017] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.284017] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15)
    [ 0.284017] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.284017] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.284017] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.284017] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.284146] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.284271] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.284398] ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15)
    [ 0.287051] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
    [ 0.287177] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
    [ 0.287307] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0
    [ 0.287434] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0
    [ 0.287561] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
    [ 0.287687] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
    [ 0.287813] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.287940] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
    [ 0.288069] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.288195] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
    [ 0.288364] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
    [ 0.288524] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
    [ 0.288685] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
    [ 0.288844] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
    [ 0.289004] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
    [ 0.289164] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
    [ 0.289324] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
    [ 0.289484] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
    [ 0.289644] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
    [ 0.289805] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0
    [ 0.289966] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0
    [ 0.290126] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0
    [ 0.290287] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0
    [ 0.290448] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
    [ 0.290612] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
    [ 0.290774] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
    [ 0.290935] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
    [ 0.291096] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
    [ 0.291257] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
    [ 0.291418] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
    [ 0.292372] Linux Plug and Play Support v0.97 (c) Adam Belay
    [ 0.292806] pnp: PnP ACPI init
    [ 0.292813] ACPI: bus type pnp registered
    [ 0.292873] pnp 00:00: parse allocated resources
    [ 0.292952] pnp 00:00: add io 0xcf8-0xcff flags 0x1
    [ 0.293413] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.293423] pnp 00:01: parse allocated resources
    [ 0.293570] pnp 00:01: add io 0x1000-0x107f flags 0x1
    [ 0.293572] pnp 00:01: add io 0x1080-0x10ff flags 0x1
    [ 0.293574] pnp 00:01: add io 0x1400-0x147f flags 0x1
    [ 0.293575] pnp 00:01: add io 0x1480-0x14ff flags 0x1
    [ 0.293577] pnp 00:01: add io 0x1800-0x187f flags 0x1
    [ 0.293578] pnp 00:01: add io 0x1880-0x18ff flags 0x1
    [ 0.293580] pnp 00:01: add mem 0x0-0xffffffffffffffff flags 0x10000001
    [ 0.293582] pnp 00:01: add mem 0xfefe0000-0xfefe01ff flags 0x1
    [ 0.293583] pnp 00:01: add mem 0xfefe1000-0xfefe10ff flags 0x1
    [ 0.293585] pnp 00:01: add mem 0x77000000-0x7effffff flags 0x1
    [ 0.293587] pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
    [ 0.294050] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.294118] pnp 00:02: parse allocated resources
    [ 0.294124] pnp 00:02: add io 0x10-0x1f flags 0x1
    [ 0.294126] pnp 00:02: add io 0x22-0x3f flags 0x1
    [ 0.294127] pnp 00:02: add io 0x44-0x5f flags 0x1
    [ 0.294128] pnp 00:02: add io 0x62-0x63 flags 0x1
    [ 0.294130] pnp 00:02: add io 0x65-0x6f flags 0x1
    [ 0.294131] pnp 00:02: add io 0x74-0x7f flags 0x1
    [ 0.294133] pnp 00:02: add io 0x91-0x93 flags 0x1
    [ 0.294134] pnp 00:02: add io 0xa2-0xbf flags 0x1
    [ 0.294136] pnp 00:02: add io 0xe0-0xef flags 0x1
    [ 0.294137] pnp 00:02: add io 0x4d0-0x4d1 flags 0x1
    [ 0.294139] pnp 00:02: add io 0x800-0x87f flags 0x1
    [ 0.294140] pnp 00:02: add io 0x295-0x314 flags 0x1
    [ 0.294142] pnp 00:02: add io 0x290-0x294 flags 0x1
    [ 0.294143] pnp 00:02: add io 0x880-0x88f flags 0x1
    [ 0.294145] pnp 00:02: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
    [ 0.294545] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.294545] pnp 00:03: parse allocated resources
    [ 0.294545] pnp 00:03: add dma 4 flags 0x4
    [ 0.294545] pnp 00:03: add io 0x0-0xf flags 0x1
    [ 0.294545] pnp 00:03: add io 0x80-0x90 flags 0x1
    [ 0.294545] pnp 00:03: add io 0x94-0x9f flags 0x1
    [ 0.294545] pnp 00:03: add io 0xc0-0xdf flags 0x1
    [ 0.294545] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.294545] pnp 00:04: parse allocated resources
    [ 0.294545] pnp 00:04: add irq 8 flags 0x1
    [ 0.294545] pnp 00:04: add mem 0xfeff0000-0xfeff03ff flags 0x1
    [ 0.294545] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.294545] pnp 00:05: parse allocated resources
    [ 0.294545] pnp 00:05: add io 0x70-0x73 flags 0x1
    [ 0.294545] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.294545] pnp 00:06: parse allocated resources
    [ 0.294545] pnp 00:06: add io 0x61-0x61 flags 0x1
    [ 0.294545] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.294545] pnp 00:07: parse allocated resources
    [ 0.294545] pnp 00:07: add io 0xf0-0xff flags 0x1
    [ 0.294545] pnp 00:07: add irq 13 flags 0x1
    [ 0.294545] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.294545] pnp 00:08: parse allocated resources
    [ 0.294545] pnp 00:08: add io 0x3f8-0x3ff flags 0x1
    [ 0.294545] pnp 00:08: add irq 4 flags 0x1
    [ 0.294545] pnp 00:08: parse resource options
    [ 0.294545] pnp 00:08: new independent option
    [ 0.294545] pnp 00:08: new dependent option (priority 0x1)
    [ 0.294545] pnp 00:08: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
    [ 0.294545] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
    [ 0.294545] pnp 00:08: new dependent option (priority 0x1)
    [ 0.294545] pnp 00:08: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
    [ 0.294545] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
    [ 0.294545] pnp 00:08: new dependent option (priority 0x1)
    [ 0.294545] pnp 00:08: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
    [ 0.294545] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
    [ 0.294545] pnp 00:08: new dependent option (priority 0x1)
    [ 0.294545] pnp 00:08: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
    [ 0.294545] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
    [ 0.294545] pnp 00:08: end dependent options
    [ 0.294545] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.294545] pnp 00:09: parse allocated resources
    [ 0.294545] pnp 00:09: add io 0x378-0x37f flags 0x1
    [ 0.294545] pnp 00:09: add io 0x778-0x77b flags 0x1
    [ 0.294545] pnp 00:09: add irq 7 flags 0x1
    [ 0.294545] pnp 00:09: add dma 3 flags 0x0
    [ 0.294545] pnp 00:09: parse resource options
    [ 0.294545] pnp 00:09: new independent option
    [ 0.294545] pnp 00:09: new dependent option (priority 0x1)
    [ 0.294545] pnp 00:09: io min 0x378 max 0x378 align 0 size 8 flags 0x1
    [ 0.294545] pnp 00:09: io min 0x778 max 0x778 align 0 size 4 flags 0x1
    [ 0.294545] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
    [ 0.294545] pnp 00:09: dma bitmask 0xb flags 0x0
    [ 0.294545] pnp 00:09: new dependent option (priority 0x1)
    [ 0.294545] pnp 00:09: io min 0x278 max 0x278 align 0 size 8 flags 0x1
    [ 0.294545] pnp 00:09: io min 0x678 max 0x678 align 0 size 4 flags 0x1
    [ 0.294545] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
    [ ? 0.294545] pnp 00:09: dma bitmask 0xb flags 0x0
    [ 0.294545] pnp 00:09: new dependent option (priority 0x1)
    [ 0.294545] pnp 00:09: io min 0x3bc max 0x3bc align 0 size 4 flags 0x1
    [ 0.294545] pnp 00:09: io min 0x7bc max 0x7bc align 0 size 4 flags 0x1
    [ 0.294545] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
    [ 0.294545] pnp 00:09: dma bitmask 0xb flags 0x0
    [ 0.294545] pnp 00:09: end dependent options
    [ 0.294545] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
    [ 0.294545] pnp 00:0a: parse allocated resources
    [ 0.294545] pnp 00:0a: add io 0x60-0x60 flags 0x1
    [ 0.294545] pnp 00:0a: add io 0x64-0x64 flags 0x1
    [ 0.294545] pnp 00:0a: add irq 1 flags 0x1
    [ 0.294545] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.295978] pnp 00:0b: parse allocated resources
    [ 0.296014] pnp 00:0b: add mem 0xe0000000-0xe1ffffff flags 0x1
    [ 0.296017] pnp 00:0b: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
    [ 0.296488] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.296497] pnp 00:0c: parse allocated resources
    [ 0.296677] pnp 00:0c: add mem 0xcde00-0xcffff flags 0x1
    [ 0.296679] pnp 00:0c: add mem 0xf0000-0xf7fff flags 0x1
    [ 0.296680] pnp 00:0c: add mem 0xf8000-0xfbfff flags 0x1
    [ 0.296682] pnp 00:0c: add mem 0xfc000-0xfffff flags 0x1
    [ 0.296684] pnp 00:0c: add mem 0x7fee0000-0x7fefffff flags 0x1
    [ 0.296685] pnp 00:0c: add mem 0xffff0000-0xffffffff flags 0x1
    [ 0.296687] pnp 00:0c: add mem 0x0-0x9ffff flags 0x1
    [ 0.296688] pnp 00:0c: add mem 0x100000-0x7fedffff flags 0x1
    [ 0.296690] pnp 00:0c: add mem 0xfec00000-0xfec00fff flags 0x1
    [ 0.296692] pnp 00:0c: add mem 0xfee00000-0xfee00fff flags 0x1
    [ 0.296693] pnp 00:0c: add mem 0xfeff0000-0xfeff03ff flags 0x1
    [ 0.296696] pnp 00:0c: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
    [ 0.297168] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.297175] pnp: PnP ACPI: found 13 devices
    [ 0.297176] ACPI: ACPI bus type pnp unregistered
    [ 0.298545] usbcore: registered new interface driver usbfs
    [ 0.298545] usbcore: registered new interface driver hub
    [ 0.298545] usbcore: registered new device driver usb
    [ 0.298545] PCI: Using ACPI for IRQ routing
    [ 0.316990] PCI-GART: No AMD northbridge found.
    [ 0.316998] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
    [ 0.317004] hpet0: 3 32-bit timers, 25000000 Hz
    [ 0.318059] ACPI: RTC can wake from S4
    [ 0.332944] pnp: the driver 'system' has been registered
    [ 0.332958] system 00:01: ioport range 0x1000-0x107f has been reserved
    [ 0.332963] system 00:01: ioport range 0x1080-0x10ff has been reserved
    [ 0.332967] system 00:01: ioport range 0x1400-0x147f has been reserved
    [ 0.332971] system 00:01: ioport range 0x1480-0x14ff has been reserved
    [ 0.332975] system 00:01: ioport range 0x1800-0x187f has been reserved
    [ 0.332979] system 00:01: ioport range 0x1880-0x18ff has been reserved
    [ 0.332985] system 00:01: iomem range 0xfefe0000-0xfefe01ff could not be reserved
    [ 0.332989] system 00:01: iomem range 0xfefe1000-0xfefe10ff could not be reserved
    [ 0.332994] system 00:01: iomem range 0x77000000-0x7effffff could not be reserved
    [ 0.332997] system 00:01: driver attached
    [ 0.333005] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
    [ 0.333009] system 00:02: ioport range 0x800-0x87f has been reserved
    [ 0.333013] system 00:02: ioport range 0x295-0x314 has been reserved
    [ 0.333017] system 00:02: ioport range 0x290-0x294 has been reserved
    [ 0.333021] system 00:02: ioport range 0x880-0x88f has been reserved
    [ 0.333025] system 00:02: driver attached
    [ 0.333039] system 00:0b: iomem range 0xe0000000-0xe1ffffff could not be reserved
    [ 0.333042] system 00:0b: driver attached
    [ 0.333053] system 00:0c: iomem range 0xcde00-0xcffff has been reserved
    [ 0.333055] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
    [ 0.333057] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
    [ 0.333059] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
    [ 0.333061] system 00:0c: iomem range 0x7fee0000-0x7fefffff could not be reserved
    [ 0.333063] system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved
    [ 0.333065] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
    [ 0.333067] system 00:0c: iomem range 0x100000-0x7fedffff could not be reserved
    [ 0.333069] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
    [ 0.333072] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
    [ 0.333074] system 00:0c: iomem range 0xfeff0000-0xfeff03ff could not be reserved
    [ 0.333075] system 00:0c: driver attached
    [ 0.334549] PCI: Bridge: 0000:00:0a.0
    [ 0.334549] IO window: disabled.
    [ 0.334549] MEM window: 0xe5000000-0xe50fffff
    [ 0.334549] PREFETCH window: disabled.
    [ 0.334549] PCI: Setting latency timer of device 0000:00:0a.0 to 64
    [ 0.334549] NET: Registered protocol family 2
    [ 0.370138] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.370676] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    [ 0.370676] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.370676] TCP: Hash tables configured (established 262144 bind 65536)
    [ 0.370676] TCP reno registered
    [ 0.379259] NET: Registered protocol family 1
    [ 0.379354] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
    [ 0.506908] Switched to high resolution mode on CPU 0
    [ 0.594553] it is
    [ 0.820639] Freeing initrd memory: 6539k freed
    [ 0.825095] audit: initializing netlink socket (disabled)
    [ 0.825095] type=2000 audit(1243276344.816:1): initialized
    [ 0.825095] Total HugeTLB memory allocated, 0
    [ 0.825095] VFS: Disk quotas dquot_6.5.1
    [ 0.825095] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.825095] msgmni has been set to 3769
    [ 0.825095] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.825095] io scheduler noop registered
    [ 0.825095] io scheduler anticipatory registered
    [ 0.825095] io scheduler deadline registered
    [ 0.825095] io scheduler cfq registered (default)
    [ 0.853594] pci 0000:00:10.0: Boot video device
    [ 0.856597] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20002980000, using 3072k, total 131072k
    [ 0.856597] vesafb: mode is 1024x768x16, linelength=2048, pages=1
    [ 0.856597] vesafb: scrolling: redraw
    [ 0.856597] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    [ 0.869095] Console: switching to colour frame buffer device 128x48
    [ 0.881607] fb0: VESA VGA frame buffer device
    [ 0.881607] hpet_resources: 0xfeff0000 is busy
    [ 0.881607] Linux agpgart interface v0.103
    [ 0.881607] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    [ 0.881682] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.885637] pnp: the driver 'serial' has been registered
    [ 0.885637] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.885637] serial 00:08: driver attached
    [ 0.885638] brd: module loaded
    [ 0.885638] input: Macintosh mouse button emulation as /class/input/input0
    [ 0.885638] pnp: the driver 'i8042 kbd' has been registered
    [ 0.885638] i8042 kbd 00:0a: driver attached
    [ 0.885638] pnp: the driver 'i8042 aux' has been registered
    [ 0.885638] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 0.885638] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 0.885638] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.906376] mice: PS/2 mouse device common for all mice
    [ 0.906376] pnp: the driver 'rtc_cmos' has been registered
    [ 0.906376] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.906376] rtc0: alarms up to one year, y3k
    [ 0.906376] rtc_cmos 00:05: driver attached
    [ 0.906376] cpuidle: using governor ladder
    [ 0.906376] cpuidle: using governor menu
    [ 0.906376] No iBFT detected.
    [ 0.906376] TCP cubic registered
    [ 0.906376] NET: Registered protocol family 17
    [ 0.906376] registered taskstats version 1
    [ 0.906376] rtc_cmos 00:05: setting system clock to 2009-05-25 18:32:25 UTC (1243276345)
    [ 0.906376] Freeing unused kernel memory: 392k freed
    [ 0.924238] input: AT Translated Set 2 keyboard as /class/input/input1
    [ 0.984097] ACPI: ACPI0007:00 is registered as cooling_device0
    [ 0.984097] ACPI: ACPI0007:01 is registered as cooling_device1
    [ 1.250251] Uniform Multi-Platform E-IDE driver
    [ 1.250255] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    [ 1.251304] NFORCE-MCP73: 0000:00:08.0 (rev a1) UDMA133 controller
    [ 1.251304] NFORCE-MCP73: IDE controller (0x10de:0x056c rev 0xa1) at PCI slot 0000:00:08.0
    [ 1.251304] NFORCE-MCP73: not 100% native mode: will probe irqs later
    [ 1.251304] NFORCE-MCP73: IDE port disabled
    [ 1.251304] ide0: BM-DMA at 0xf000-0xf007
    [ 1.251304] Probing IDE interface ide0...
    [ 1.301217] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 1.984824] hda: TSSTcorpDVD-ROM SH-D162C, ATAPI CD/DVD-ROM drive
    [ 2.657109] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
    [ 2.657212] hda: UDMA/33 mode selected
    [ 2.657375] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    [ 3.276397] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
    [ 3.276397] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [AUBA] -> GSI 23 (level, low) -> IRQ 23
    [ 3.276397] PCI: Setting latency timer of device 0000:00:04.0 to 64
    [ 3.276397] ohci_hcd 0000:00:04.0: OHCI Host Controller
    [ 3.276397] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1
    [ 3.276397] ohci_hcd 0000:00:04.0: irq 23, io mem 0xe5108000
    [ 3.332030] usb usb1: configuration #1 chosen from 1 choice
    [ 3.332054] hub 1-0:1.0: USB hub found
    [ 3.332060] hub 1-0:1.0: 10 ports detected
    [ 3.447521] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
    [ 3.447523] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.447525] usb usb1: Product: OHCI Host Controller
    [ 3.447526] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
    [ 3.447528] usb usb1: SerialNumber: 0000:00:04.0
    [ 3.449482] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
    [ 3.449482] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [AUB2] -> GSI 22 (level, low) -> IRQ 22
    [ 3.449482] PCI: Setting latency timer of device 0000:00:04.1 to 64
    [ 3.449482] ehci_hcd 0000:00:04.1: EHCI Host Controller
    [ 3.449485] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
    [ 3.449512] ehci_hcd 0000:00:04.1: debug port 1
    [ 3.449516] PCI: cache line size of 32 is not supported by device 0000:00:04.1
    [ 3.449525] ehci_hcd 0000:00:04.1: irq 22, io mem 0xe5107000
    [ 3.497486] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    [ 3.497571] usb usb2: configuration #1 chosen from 1 choice
    [ 3.497605] hub 2-0:1.0: USB hub found
    [ 3.497611] hub 2-0:1.0: 10 ports detected
    [ 3.600983] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    [ 3.600985] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.600987] usb usb2: Product: EHCI Host Controller
    [ 3.600988] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
    [ 3.600989] usb usb2: SerialNumber: 0000:00:04.1
    [ 3.600983] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
    [ 3.600983] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
    [ 3.600983] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21
    [ 3.600983] PCI: Setting latency timer of device 0000:00:0f.0 to 64
    [ 4.571787] forcedeth 0000:00:0f.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1f:d0:d3:d5:7f
    [ 4.571787] forcedeth 0000:00:0f.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3
    [ 4.571787] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
    [ 4.571787] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
    [ 4.619785] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[e5004000-e50047ff] Max Packet=[2048] IR/IT contexts=[4/8]
    [ 4.620941] No dock devices found.
    [ 4.625370] SCSI subsystem initialized
    [ 4.631293] libata version 3.00 loaded.
    [ 4.631293] ahci 0000:00:0e.0: version 3.0
    [ 4.631293] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
    [ 4.631293] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20
    [ 5.311009] usb 1-2: new low speed USB device using ohci_hcd and address 2
    [ 5.694895] usb 1-2: configuration #1 chosen from 1 choice
    [ 5.710895] usb 1-2: New USB device found, idVendor=045e, idProduct=0084
    [ 5.710895] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [ 5.710895] usb 1-2: Product: Microsoft Basic Optical Mouse
    [ 5.710895] usb 1-2: Manufacturer: Microsoft
    [ 5.835553] ahci 0000:00:0e.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
    [ 5.835558] ahci 0000:00:0e.0: flags: 64bit sntf led clo pmp pio
    [ 5.835564] PCI: Setting latency timer of device 0000:00:0e.0 to 64
    [ 5.839533] scsi0 : ahci
    [ 5.839533] scsi1 : ahci
    [ 5.840030] scsi2 : ahci
    [ 5.840030] scsi3 : ahci
    [ 5.840030] ata1: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104100 irq 1279
    [ 5.840030] ata2: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104180 irq 1279
    [ 5.840030] ata3: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104200 irq 1279
    [ 5.840030] ata4: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104280 irq 1279
    [ 6.046020] usb 1-3: new full speed USB device using ohci_hcd and address 3
    [ 6.100302] ieee1394: Host added: ID:BUS[0-00:1023] GUID[007fd13300001fd0]
    [ 6.313998] usb 1-3: configuration #1 chosen from 1 choice
    [ 6.331119] usb 1-3: New USB device found, idVendor=04b8, idProduct=0005
    [ 6.331121] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [ 6.331123] usb 1-3: Product: USB Printer
    [ 6.331124] usb 1-3: Manufacturer: EPSON
    [ 6.331125] usb 1-3: SerialNumber: HU33W0510132351290
    [ 6.415164] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 6.418297] ata1.00: HPA detected: current 976771055, native 976773168
    [ 6.418304] ata1.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
    [ 6.418308] ata1.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 6.419237] ata1.00: configured for UDMA/133
    [ 6.658190] usb 1-4: new full speed USB device using ohci_hcd and address 4
    [ 6.738070] ata2: SATA link down (SStatus 0 SControl 300)
    [ 6.910170] usb 1-4: configuration #1 chosen from 1 choice
    [ 6.913302] usb 1-4: New USB device found, idVendor=06bd, idProduct=0100
    [ 6.913304] usb 1-4: New USB device strings: Mfr=1, Product=3, SerialNumber=0
    [ 6.913306] usb 1-4: Product: SnapScan Touch
    [ 6.913307] usb 1-4: Manufacturer: Agfa
    [ 6.956496] usbcore: registered new interface driver hiddev
    [ 6.966064] input: Microsoft Microsoft Basic Optical Mouse as /class/input/input2
    [ 6.992165] input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse ] on usb-0000:00:04.0-2
    [ 6.992195] usbcore: registered new interface driver usbhid
    [ 6.992197] usbhid: v2.6:USB HID core driver
    [ 7.305378] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 7.306705] ata3.00: ATAPI: Optiarc DVD RW AD-7200S, 1.06, max UDMA/100
    [ 7.308093] ata3.00: configured for UDMA/100
    [ 7.680038] ata4: SATA link down (SStatus 0 SControl 300)
    [ 7.680029] scsi 0:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
    [ 7.710744] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7200S 1.06 PQ: 0 ANSI: 5
    [ 7.721704] hda: ATAPI 48X DVD-ROM drive, 256kB Cache
    [ 7.721704] Uniform CD-ROM driver Revision: 3.20
    [ 7.729706] Driver 'sd' needs updating - please use bus_type methods
    [ 7.729706] sd 0:0:0:0: [sda] 976771055 512-byte hardware sectors (500107 MB)
    [ 7.729706] sd 0:0:0:0: [sda] Write Protect is off
    [ 7.729706] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 7.729706] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 7.729706] sd 0:0:0:0: [sda] 976771055 512-byte hardware sectors (500107 MB)
    [ 7.729706] sd 0:0:0:0: [sda] Write Protect is off
    [ 7.729706] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 7.729706] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 7.729706] sda:<4>Driver 'sr' needs updating - please use bus_type methods
    [ 7.741707] sda1 sda2 sda3 < sda5 sda6 sda7 >
    [ 7.782387] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 7.790313] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 7.790394] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [ 7.800712] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 7.800712] sr 2:0:0:0: Attached scsi generic sg1 type 5
    [ 8.160058] PM: Starting manual resume from disk
    [ 8.167963] EXT3-fs: INFO: recovery required on readonly filesystem.
    [ 8.167963] EXT3-fs: write access will be enabled during recovery.
    [ 9.473177] kjournald starting. Commit interval 5 seconds
    [ 9.473177] EXT3-fs: sda2: orphan cleanup on readonly fs
    [ 9.473177] ext3_orphan_cleanup: deleting unreferenced inode 1181706
    [ 9.473177] ext3_orphan_cleanup: deleting unreferenced inode 293203
    [ 9.473177] EXT3-fs: sda2: 2 orphan inodes deleted
    [ 9.473177] EXT3-fs: recovery complete.
    [ 9.613551] EXT3-fs: mounted filesystem with ordered data mode.
    [ 10.542362] udevd version 125 started
    [ 11.107362] input: Power Button (FF) as /class/input/input3
    [ 11.250057] ACPI: Power Button (FF) [PWRF]
    [ 11.250107] input: Power Button (CM) as /class/input/input4
    [ 11.312421] ACPI: Power Button (CM) [PWRB]
    [ 11.312825] ACPI: WMI: Mapper loaded
    [ 11.662308] input: PC Speaker as /class/input/input5
    [ 11.698834] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
    [ 11.698852] usbcore: registered new interface driver usblp
    [ 11.759735] pnp: the driver 'parport_pc' has been registered
    [ 11.759735] parport_pc 00:09: reported by Plug and Play ACPI
    [ 11.759735] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
    [ 11.854843] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
    [ 11.854843] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 23
    [ 11.854843] PCI: Setting latency timer of device 0000:00:09.0 to 64
    [ 11.862928] parport_pc 00:09: driver attached
    [ 12.900912] Adding 7815580k swap on /dev/sda5. Priority:-1 extents:1 across:7815580k
    [ 13.093147] EXT3 FS on sda2, internal journal
    [ 13.947619] loop: module loaded
    [ 16.380064] kjournald starting. Commit interval 5 seconds
    [ 16.380064] EXT3 FS on sda6, internal journal
    [ 16.380064] EXT3-fs: mounted filesystem with ordered data mode.
    [ 18.673327] NET: Registered protocol family 10
    [ 18.673327] lo: Disabled Privacy Extensions
    [ 18.946972] lp0: using parport0 (interrupt-driven).
    [ 18.962972] ppdev: user-space parallel port driver
    [ 21.302777] vboxdrv: Trying to deactivate the NMI watchdog permanently...
    [ 21.302777] vboxdrv: Successfully done.
    [ 21.302777] vboxdrv: Found 2 processor cores.
    [ 21.302777] VBoxDrv: dbg - g_abExecMemory=ffffffffa02ddb60
    [ 21.302777] vboxdrv: fAsync=0 offMin=0x35f offMax=0xb60
    [ 21.302777] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 21.302777] vboxdrv: Successfully loaded version 2.2.2 (interface 0x000a0009).
    [ 21.518306] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0478d00
    [ 25.014881] nvidia: module license 'NVIDIA' taints kernel.
    [ 25.269858] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 22
    [ 25.269858] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [AIGP] -> GSI 22 (level, low) -> IRQ 22
    [ 25.269858] PCI: Setting latency timer of device 0000:00:10.0 to 64
    [ 25.269858] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.09 Wed Jun 4 23:40:50 PDT 2008
    [ 41.685843] eth0: no IPv6 routers present




    Après mise en veille :


    [ 1078.469574] PM: Syncing filesystems ... done.
    [ 1078.469574] Freezing user space processes ... (elapsed 0.00 seconds) done.
    [ 1078.633575] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    [ 1078.633575] Suspending console(s)
    [ 1078.633575] sd 0:0:0:0: [sda] Synchronizing SCSI cache
    [ 1078.866507] sd 0:0:0:0: [sda] Stopping disk
    [ 1079.862597] ACPI handle has no context!
    [ 1079.862826] parport_pc 00:09: disabled
    [ 1079.863010] serial 00:08: disabled
    [ 1079.863067] ACPI handle has no context!
    [ 1079.878534] NVRM: RmPowerManagement: 4
    [ 1080.246496] ACPI: PCI interrupt for device 0000:00:09.0 disabled
    [ 1080.262654] ACPI: PCI interrupt for device 0000:00:04.1 disabled
    [ 1080.278531] ACPI: PCI interrupt for device 0000:00:04.0 disabled
    [ 1080.295254] ACPI: Preparing to enter system sleep state S3
    [ 1080.296414] Disabling non-boot CPUs ...
    [ 1080.296425] CPU0 attaching NULL sched-domain.
    [ 1080.296428] CPU1 attaching NULL sched-domain.
    [ 1080.412109] CPU 1 is now offline
    [ 1080.412112] SMP alternatives: switching to UP code
    [ 1080.416416] CPU0 attaching sched-domain:
    [ 1080.416418] domain 0: span 0
    [ 1080.416419] groups: 0
    [ 1080.416555] CPU1 is down
    [ 1080.416555] Back to C!
    [ 1080.418476] Enabling non-boot CPUs ...
    [ 1080.418477] CPU0 attaching NULL sched-domain.
    [ 1080.428212] SMP alternatives: switching to SMP code
    [ 1080.432614] Booting processor 1/1 ip 6000
    [ 1080.440085] Initializing CPU#1
    [ 1080.440085] Calibrating delay using timer specific routine.. 5000.03 BogoMIPS (lpj=10000076)
    [ 1080.440085] CPU: L1 I cache: 32K, L1 D cache: 32K
    [ 1080.440085] CPU: L2 cache: 2048K
    [ 1080.440085] CPU 1/1 -> Node 0
    [ 1080.440085] CPU: Physical Processor ID: 0
    [ 1080.440085] CPU: Processor Core ID: 1
    [ 1080.520326] CPU1: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 06
    [ 1080.520344] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    [ 1080.540386] CPU0 attaching sched-domain:
    [ 1080.540388] domain 0: span 0-1
    [ 1080.540389] groups: 0 1
    [ 1080.540391] domain 1: span 0-1
    [ 1080.540392] groups: 0-1
    [ 1080.540394] CPU1 attaching sched-domain:
    [ 1080.540395] domain 0: span 0-1
    [ 1080.540396] groups: 1 0
    [ 1080.540398] domain 1: span 0-1
    [ 1080.540399] groups: 0-1
    [ 1080.440085] CPU1 is up
    [ 1080.440085] PM: Writing back config space on device 0000:00:01.0 at offset f (was 0, writing ff)
    [ 1080.440085] PM: Writing back config space on device 0000:00:01.1 at offset f (was 0, writing ff)
    [ 1080.440085] PM: Writing back config space on device 0000:00:01.2 at offset f (was 0, writing ff)
    [ 1080.440085] PM: Writing back config space on device 0000:00:01.3 at offset f (was 0, writing ff)
    [ 1080.440085] PM: Writing back config space on device 0000:00:01.4 at offset f (was 0, writing ff)
    [ 1080.440085] PM: Writing back config space on device 0000:00:01.5 at offset f (was 0, writing ff)
    [ 1080.440085] PM: Writing back config space on device 0000:00:01.6 at offset f (was 0, writing ff)
    [ 1080.440085] PM: Writing back config space on device 0000:00:02.0 at offset f (was 0, writing ff)
    [ 1080.675972] Switched to high resolution mode on CPU 1
    [ 1080.688084] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [AUBA] -> GSI 23 (level, low) -> IRQ 23
    [ 1080.688092] PCI: Setting latency timer of device 0000:00:04.0 to 64
    [ 1080.728020] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [AUB2] -> GSI 22 (level, low) -> IRQ 22
    [ 1080.728027] PCI: Setting latency timer of device 0000:00:04.1 to 64
    [ 1080.744103] PM: Writing back config space on device 0000:00:09.0 at offset f (was 5020100, writing 502010b)
    [ 1080.744113] PM: Writing back config space on device 0000:00:09.0 at offset 4 (was 0, writing e5100000)
    [ 1080.744117] PM: Writing back config space on device 0000:00:09.0 at offset 1 (was b00000, writing b00002)
    [ 1080.744128] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 23
    [ 1080.744132] PCI: Setting latency timer of device 0000:00:09.0 to 64
    [ 1080.832016] PCI: Setting latency timer of device 0000:00:0a.0 to 64
    [ 1080.847862] PM: Writing back config space on device 0000:00:0e.0 at offset 1 (was b00000, writing b00407)
    [ 1080.847892] PCI: Setting latency timer of device 0000:00:0e.0 to 64
    [ 1082.030725] PM: Writing back config space on device 0000:00:0f.0 at offset f (was 14010100, writing 1401010f)
    [ 1082.030737] PM: Writing back config space on device 0000:00:0f.0 at offset 7 (was 0, writing e5106000)
    [ 1082.030742] PM: Writing back config space on device 0000:00:0f.0 at offset 6 (was 0, writing e510a000)
    [ 1082.030747] PM: Writing back config space on device 0000:00:0f.0 at offset 5 (was 1, writing e001)
    [ 1082.030752] PM: Writing back config space on device 0000:00:0f.0 at offset 4 (was 0, writing e5109000)
    [ 1082.030759] PM: Writing back config space on device 0000:00:0f.0 at offset 1 (was b00000, writing b00007)
    [ 1082.031635] NVRM: RmPowerManagement: 5
    [ 1082.348773] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1082.348784] ata2: SATA link down (SStatus 0 SControl 300)
    [ 1082.680773] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1082.684773] ata3.00: configured for UDMA/100
    [ 1082.701375] PM: Writing back config space on device 0000:01:07.0 at offset f (was 4020100, writing 402010a)
    [ 1082.701393] PM: Writing back config space on device 0000:01:07.0 at offset 5 (was 0, writing e5000000)
    [ 1082.701400] PM: Writing back config space on device 0000:01:07.0 at offset 4 (was 0, writing e5004000)
    [ 1082.701406] PM: Writing back config space on device 0000:01:07.0 at offset 3 (was 0, writing 2008)
    [ 1082.701413] PM: Writing back config space on device 0000:01:07.0 at offset 1 (was 2100000, writing 2100006)
    [ 1082.751372] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[e5004000-e50047ff] Max Packet=[2048] IR/IT contexts=[4/8]
    [ 1082.751405] serial 00:08: current resources: pnp_start_dev
    [ 1082.751407] serial 00:08: irq 4 flags 0x401
    [ 1082.751408] serial 00:08: io 0x3f8-0x3ff flags 0x101
    [ 1082.751410] serial 00:08: set resources
    [ 1082.751867] serial 00:08: encode 2 resources
    [ 1082.751869] serial 00:08: encode io 0x3f8-0x3ff decode 0x1
    [ 1082.751871] serial 00:08: encode irq 4 edge high exclusive (2-byte descriptor)
    [ 1082.752156] serial 00:08: activated
    [ 1082.752161] parport_pc 00:09: current resources: pnp_start_dev
    [ 1082.752163] parport_pc 00:09: irq 7 flags 0x401
    [ 1082.752164] parport_pc 00:09: dma 3 flags 0x800
    [ 1082.752165] parport_pc 00:09: io 0x378-0x37f flags 0x101
    [ 1082.752167] parport_pc 00:09: io 0x778-0x77b flags 0x101
    [ 1082.752169] parport_pc 00:09: set resources
    [ 1082.752720] parport_pc 00:09: encode 4 resources
    [ 1082.752721] parport_pc 00:09: encode io 0x378-0x37f decode 0x1
    [ 1082.752723] parport_pc 00:09: encode io 0x778-0x77b decode 0x1
    [ 1082.752724] parport_pc 00:09: encode irq 7 edge high exclusive (2-byte descriptor)
    [ 1082.752726] parport_pc 00:09: encode dma 3 type 0x0 transfer 0x0 master 0
    [ 1082.752773] parport_pc 00:09: activated
    [ 1082.785049] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
    [ 1082.785152] hda: UDMA/33 mode selected
    [ 1083.081690] sd 0:0:0:0: [sda] Starting disk
    [ 1084.904671] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1084.913155] ata1.00: configured for UDMA/133
    [ 1084.936785] sd 0:0:0:0: [sda] 976771055 512-byte hardware sectors (500107 MB)
    [ 1084.936785] sd 0:0:0:0: [sda] Write Protect is off
    [ 1084.936785] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1084.936785] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1084.936785] Restarting tasks ... done.




    PS: Je n'arrive pas à mettre ma citation dans un cadre avec ascenceur...

  • # Pas grand chose de neuf !

    Posté par  . En réponse au message KDE, Gnome, Cairo-Dock ... ou rien du tout.. Évalué à 2.

    J'aime bien ton idée d'utiliser les cotés des écrans panoramiques, mais c'est le seul truc intéressant.

    Personnellement, j'aime bien utiliser le bureau pour y mettre mes documents de travail et je range mon bureau en fin de journée.
    Les outils sont à leur place rangés dans des boites à outils (dans un tiroirs ou une barre de lancement rapide...)

    Les infos a afficher doivent être dans une zone discrète mais ce n'est pas forcément utile qu'ils soient en permanence sur le bureau. Ca distrait des taches courantes et réduit l'efficacité. C'est ce que Microsoft a pris comme option avec Vista et ses desklet.

    Pour créer quelque chose de neuf, essaye de travailler un peu plus ta barre étendue. J'aime bien ce principe, mais pour l'instant, elle est vraiment très fouillis.

  • [^] # Re: Ya quoi de nouveau ?

    Posté par  . En réponse à la dépêche Ulteo sort la version 1.0 de son bureau à distance. Évalué à 1.

    Je le comparerais plutôt à XDMCP...
    Le PC devient un simple terminal ! Mais on peux quand même travailler sur un autre display.

  • # C'est du MIDI...

    Posté par  . En réponse au message ROSEGARDEN. Évalué à 2.

    Rosengarden, testé il y a quelques années jouait en midi.
    Il faut donc installé un convertisseur midi=>alsa.
    Je crois qu'un paquet comme timidity fait ça !?

  • # Mailpictures

    Posté par  . En réponse au message Captures d'écrans & menu contextuel. Évalué à 1.

    Si c'est juste pour envoyer les photos par mail, il existe un nautilus action : mailpictures
    cf : http://forum.ubuntu-fr.org/viewtopic.php?id=137609
    qui permet de les envoyer facilement en réduisant la taille.

  • # Tout a fait d'accord...

    Posté par  . En réponse à la dépêche Neuf mauvaises pratiques du logiciel libre. Évalué à 2.

    sauf que je tempérerais un peu certain points.

    Je pense que c'est très important de pouvoir se dire ce qu'il ne va pas. Comme dans toutes les familles, il y a des problèmes. Si on en parle jamais, ca devient catastrophique.

    Heureux ceux qui acceptent les remarques constructives. C'est comme cela qu'on avance le plus vite. Mais peu de gens osent désormais dire quelque chose de constructif, a force de se faire envoyer sur les roses

    D'autre, à la moindre remarque vont faire l'inverse pour prouver qu'ils avaient raison. Ils ne feront jamais rien de bien.

  • # Numéroation versions ???

    Posté par  . En réponse à la dépêche VideoLAN Dev Days '08. Évalué à 2.

    VLC est à ce jour en version 0,98b.
    Est-ce une version de développement car pas encore en 1 ou alors pouvez-vous m'expliquer ce que cela signifie ?