Autant pour moi, je viens de retrouver le dossier sur le net, j'avais de mauvais souvenirs concernant la direction de google, toutes mes excuses.
Par contre ils parlent pas mal du patriot Act, qui peut contraindre Google à transmettre des informations au gouvernement, mais google se défend de faire cela :
"Le Patriot Act, voté dans la foulée du 11 septembre 2001, peut ainsi contraindre Google à transmettre les données des utilisateurs au gouvernement. Dans ce cas, la compagnie serait tenue de garder le silence sur cette perquisition informatique. Interrogé à ce sujet par John Battelle, Sergey Brin répond : « Je n'ai pas lu le Patriot Act, mais je pense que ces inquiétudes sont exagérées. Le gouvernement devrait au moins nous communiquer la nature de sa requête. Je ne pense pas que ce soit un problème sérieux et, si ça le devenait, nous changerions notre politique. » "
Je me souviens juste que c'était dans le magasine Le point, j'ai du lire l'article dans une salle d'attente... !
J'ai essayé de retrouver l'article sur leur site mais l'accès est payant. Si quelqu'un est abonné à ce magasine il pourra sûrement donner plus d'informations.
Par contre quand je parle du "patriot act" c'est plus parce que cette volonté d'en savoir toujours plus sur les gens m'y a fait penser, et que Google contribue activement à ça. J'espère que toutes ces informations ne servent qu'a des publicitaires, mais si des politiques s'en mêlent je ne sait pas ou ça nous mènera.
Il y a plusieurs mois le magasine "Le point" a consacré un dossier à google. Je me rappelle surtout qu'ils disaient que depuis quelques temps des gens haut placé de Washington était parachuté à la direction de google et que doucement mais surement, la mentalitée et les objetifs de google évoluent et ce n'est certainement pas dans le sens des libertées individuelles... (le patriot act n'est jamais très loin)
De plus google est de plus en plus incontournable, s'il est plus facile de changer de moteur de recherche que d'OS, google est déjà entré dans les moeurs. Et une entreprise qui à un aussi grand contrôle de l'information sur internet peut faire en sort d"éviter que nous utilisions autre chose.
Je pense que dire sa c'est une bonne manière pour MS de ne pas passer pour les "méchants" auprès d'un public qui decouvrira peut etre les logiciels libres à travers ces reportages.
Maintenant c'est peut etre pas faux de dire que "La communauté Open Source stimule l'innovation dans le domaine des logiciels.", c'est le principe de la concurence et sa doit les changer d'en avoir un peu.
Il me semble que l'un des objectifs de plasma est de rendre kde plus léger et rapide malgrès les innovations visuelles. Donc je ne pense pas que phonon aura une grande influence dans l'ensemble.
Je me demande juste si ce projet ne démarre pas un peu tard par rapport au reste de kde4 qui devrai en théorie sortir a la fin de l'année vers octobre je crois.
J'ai tapé "dmesg" dans un terminal en root j'espère que c'est ce qu'il falait faire... voici ce que j'ai obtenu :
$root # dmesg
ling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
ACPI: Looking for DSDT in initrd... not found!
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=0 pin2=-1
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 4300k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: nForce2 C1 Halt Disconnect fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
pnp: 00:00: ioport range 0x4400-0x447f has been reserved
pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
pnp: 00:00: ioport range 0x4200-0x427f has been reserved
pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
pnp: 00:01: ioport range 0x5000-0x503f has been reserved
pnp: 00:01: ioport range 0x5500-0x553f has been reserved
audit: initializing netlink socket (disabled)
audit(1124244020.616:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
Restarting tasks...<6> Strange, kswapd0 not stopped
Strange, kseriod not stopped
done
ACPI wakeup devices:
HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
ACPI: (supports S0 S1 S4 S4bios S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4300KiB [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 224k freed
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: HDS722580VLAT20, ATA DISK drive
hdb: WDC WD200BB-32CLB0, ATA DISK drive
elevator: using anticipatory as default io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 160836480 sectors (82348 MB) w/1794KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1
hdb: max request size: 128KiB
hdb: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(100)
hdb: cache flushes not supported
/dev/ide/host0/bus0/target1/lun0: p2 < p5 p6 p7 >
Probing IDE interface ide1...
hdc: PIONEER DVD-RW DVR-107D, ATAPI CD/DVD-ROM drive
hdd: LG CD-ROM CRD-8522B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
Stopping tasks: ==|
Freeing memory... done (458 pages freed)
Restarting tasks... done
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
Adding 305164k swap on /dev/hdb6. Priority:-1 extents:1
EXT3 FS on hdb7, internal journal
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 52X CD-ROM drive, 128kB Cache
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
mice: PS/2 mouse device common for all mice
Capability LSM initialized
device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@redhat.com
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Real Time Clock Driver v1.12
input: PC Speaker
inserting floppy driver for 2.6.10-5-386
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 512M @ 0x80000000
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 22 (level, high) -> IRQ 22
ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 22, pci mem 0xc5000000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 21 (level, high) -> IRQ 21
ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2)
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 21, pci mem 0xc5001000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usb 1-2: new full speed USB device using ohci_hcd and address 2
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 20 (level, high) -> IRQ 20
ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 20, pci mem 0xc5002000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
Linux video capture interface: v1.00
drivers/usb/media/ov511.c: USB OV511+ video device found
drivers/usb/media/ov511.c: reg read: error -110: NAK (device does not respond)
drivers/usb/media/ov511.c: Unable to read camera bridge registers
drivers/usb/media/ov511.c: OV511 Config failed
drivers/usb/media/ov511.c: Camera initialization failed
ov511: probe of 1-2:1.0 failed with error -5
usbcore: registered new driver ov511
drivers/usb/media/ov511.c: v1.64 for Linux 2.5 : ov511 USB Camera Driver
usb 1-2: USB disconnect, address 2
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.30.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 22 (level, high) -> IRQ 22
PCI: Setting latency timer of device 0000:00:04.0 to 64
ohci_hcd 0000:00:02.0: wakeup
ohci_hcd 0000:00:02.1: wakeup
eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
usb 1-2: new full speed USB device using ohci_hcd and address 3
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
drivers/usb/media/ov511.c: USB OV511+ video device found
drivers/usb/media/ov511.c: model: Generic Camera (no ID)
Evaluate _OSC Set fails. Status = 0x0005
pciehp: add_host_bridge: status 5
pciehp: Fails to gain control of native hot-plug
Evaluate _OSC Set fails. Status = 0x0005
pciehp: add_host_bridge: status 5
pciehp: Fails to gain control of native hot-plug
drivers/usb/media/ov511.c: Sensor is an OV7620
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI interrupt 0000:01:06.0[A] -> GSI 16 (level, high) -> IRQ 16
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 19 (level, high) -> IRQ 19
eth1: RealTek RTL8139 at 0xd400, 00:30:4f:1c:7a:78, IRQ 19
eth1: Identified 8139 chip type 'RTL-8100B/8139D'
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
rt2500: no version for "struct_module" found: kernel tainted.
rt2500: version magic '2.6.10-5 SMP preempt PENTIUM4 4KSTACKS gcc-3.3' should be '2.6.10-5-386 preempt 386 gcc-3.3'
eth1: link down
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 17 (level, high) -> IRQ 17
bttv0: Bt878 (rev 17) at 0000:01:09.0, irq: 17, latency: 32, mmio: 0xc0000000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00fff3ff [init]
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: pinnacle/mt: id=4 info="PAL+SECAM / mono" radio=no
bttv0: using tuner=33
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tda9885/6/7: chip found @ 0x86
tuner: chip found at addr 0xc0 i2c-bus bt878 #0 [sw]
tuner: type set to 33 (MT20xx universal) by bt878 #0 [sw]
tuner: microtune: companycode=4d54 part=04 rev=04
tuner: microtune MT2032 found, OK
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
ACPI: PCI interrupt 0000:01:09.1[A] -> GSI 17 (level, high) -> IRQ 17
NET: Registered protocol family 17
drivers/usb/media/ov511.c: Device at usb-0000:00:02.0-2 registered to minor 1
usb 2-2: new low speed USB device using ohci_hcd and address 2
usbcore: registered new driver hiddev
usb 2-2: cat timed out on ep0in
drivers/usb/input/hid-core.c: timeout initializing reports
input: USB HID v1.00 Mouse [ARROW STRONG USB Mouse] on usb-0000:00:02.1-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
ts: Compaq touchscreen protocol output
eth0: no link during initialization.
ACPI: Power Button (FF) [PWRF]
ibm_acpi: ec object not found
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02f0500(lo)
IPv6 over IPv4 tunneling driver
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 19 (level, high) -> IRQ 19
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7174 Tue Mar 22 06:44:39 PST 2005
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:02:00.0 into 4x mode
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:02:00.0 into 4x mode
eth0: no IPv6 routers present
eth1: no IPv6 routers present
Sa a l'air interressant cette commande, je ne m'en était jamais servi, elle fait quoi exactement ?
Pour la solution qui consiste à utilies les drivers windows j'aimerai autant éviter surtout que sa a l'air jouable avec des drivers libres.
Par contre je me demande si ma carte sera un jour detectée lors de l'installation de ma distrib (a moins que cela ne dépende de la version du noyau ??) ou s'il faudra continuer à installer des drivers manuellement ?
J'ai essaié de n'utiliser que cette liste de liens en mettant des "##" devant les autres, mais lorsque je lance Synaptik j'obtient :
W: Impossible de localiser la liste des paquets sources http://fr.archive.ubuntu.com(...) hoary/main Packages (/var/lib/apt/lists/fr.archive.ubuntu.com_ubuntu(...)_dists_hoary_main_binary-i386_Packages) - stat (2 Aucun fichier ou répertoire de ce type)
W: Impossible de localiser la liste des paquets sources http://fr.archive.ubuntu.com(...) hoary/restricted Packages (/var/lib/apt/lists/fr.archive.ubuntu.com_ubuntu(...)_dists_hoary_restricted_binary-i386_Packages) - stat (2 Aucun fichier ou répertoire de ce type)
W: Impossible de localiser la liste des paquets sources http://fr.archive.ubuntu.com(...) hoary/universe Packages (/var/lib/apt/lists/fr.archive.ubuntu.com_ubuntu(...)_dists_hoary_universe_binary-i386_Packages) - stat (2 Aucun fichier ou répertoire de ce type)
W: Impossible de localiser la liste des paquets sources http://fr.archive.ubuntu.com(...) hoary-updates/main Packages (/var/lib/apt/lists/fr.archive.ubuntu.com_ubuntu(...)_dists_hoary-updates_main_binary-i386_Packages) - stat (2 Aucun fichier ou répertoire de ce type)
W: Impossible de localiser la liste des paquets sources http://fr.archive.ubuntu.com(...) hoary-updates/restricted Packages (/var/lib/apt/lists/fr.archive.ubuntu.com_ubuntu(...)_dists_hoary-updates_restricted_binary-i386_Packages) - stat (2 Aucun fichier ou répertoire de ce type)
W: Impossible de localiser la liste des paquets sources http://security.ubuntu.com(...) hoary-security/main Packages (/var/lib/apt/lists/security.ubuntu.com_ubuntu(...)_dists_hoary-security_main_binary-i386_Packages) - stat (2 Aucun fichier ou répertoire de ce type)
W: Impossible de localiser la liste des paquets sources http://security.ubuntu.com(...) hoary-security/restricted Packages (/var/lib/apt/lists/security.ubuntu.com_ubuntu(...)_dists_hoary-security_restricted_binary-i386_Packages) - stat (2 Aucun fichier ou répertoire de ce type)
W: Impossible de localiser la liste des paquets sources http://security.ubuntu.com(...) hoary-security/universe Packages (/var/lib/apt/lists/security.ubuntu.com_ubuntu(...)_dists_hoary-security_universe_binary-i386_Packages) - stat (2 Aucun fichier ou répertoire de ce type)
W: Impossible de localiser la liste des paquets sources http://ubuntu-backports.mirrormax.net(...) hoary-backports/main Packages (/var/lib/apt/lists/ubuntu-backports.mirrormax.net_(...)_dists_hoary-backports_main_binary-i386_Packages) - stat (2 Aucun fichier ou répertoire de ce type)
W: Impossible de localiser la liste des paquets sources http://ubuntu-backports.mirrormax.net(...) hoary-backports/universe Packages (/var/lib/apt/lists/ubuntu-backports.mirrormax.net_(...)_dists_hoary-backports_universe_binary-i386_Packages) - stat (2 Aucun fichier ou répertoire de ce type)
W: Impossible de localiser la liste des paquets sources http://ubuntu-backports.mirrormax.net(...) hoary-backports/multiverse Packages (/var/lib/apt/lists/ubuntu-backports.mirrormax.net_(...)_dists_hoary-backports_multiverse_binary-i386_Packages) - stat (2 Aucun fichier ou répertoire de ce type)
W: Impossible de localiser la liste des paquets sources http://ubuntu-backports.mirrormax.net(...) hoary-backports/restricted Packages (/var/lib/apt/lists/ubuntu-backports.mirrormax.net_(...)_dists_hoary-backports_restricted_binary-i386_Packages) - stat (2 Aucun fichier ou répertoire de ce type)
W: Impossible de localiser la liste des paquets sources http://ubuntu-backports.mirrormax.net(...) hoary-extras/main Packages (/var/lib/apt/lists/ubuntu-backports.mirrormax.net_(...)_dists_hoary-extras_main_binary-i386_Packages) - stat (2 Aucun fichier ou répertoire de ce type)
W: Impossible de localiser la liste des paquets sources http://ubuntu-backports.mirrormax.net(...) hoary-extras/universe Packages (/var/lib/apt/lists/ubuntu-backports.mirrormax.net_(...)_dists_hoary-extras_universe_binary-i386_Packages) - stat (2 Aucun fichier ou répertoire de ce type)
W: Impossible de localiser la liste des paquets sources http://ubuntu-backports.mirrormax.net(...) hoary-extras/multiverse Packages (/var/lib/apt/lists/ubuntu-backports.mirrormax.net_(...)_dists_hoary-extras_multiverse_binary-i386_Packages) - stat (2 Aucun fichier ou répertoire de ce type)
W: Impossible de localiser la liste des paquets sources http://ubuntu-backports.mirrormax.net(...) hoary-extras/restricted Packages (/var/lib/apt/lists/ubuntu-backports.mirrormax.net_(...)_dists_hoary-extras_restricted_binary-i386_Packages) - stat (2 Aucun fichier ou répertoire de ce type)
W: Impossible de localiser la liste des paquets sources http://kubuntu.org(...) hoary-updates/main Packages (/var/lib/apt/lists/kubuntu.org_hoary-kde342(...)_dists_hoary-updates_main_binary-i386_Packages) - stat (2 Aucun fichier ou répertoire de ce type)
W: Impossible de localiser la liste des paquets sources http://kubuntu.org(...) hoary-updates/main Packages (/var/lib/apt/lists/kubuntu.org_hoary-koffice141(...)_dists_hoary-updates_main_binary-i386_Packages) - stat (2 Aucun fichier ou répertoire de ce type)
[^] # Re: Dangereux ou honête ?
Posté par Agrou (site web personnel) . En réponse à la dépêche Google, futur grand méchant loup ?. Évalué à 3.
Par contre ils parlent pas mal du patriot Act, qui peut contraindre Google à transmettre des informations au gouvernement, mais google se défend de faire cela :
Voici le lien vers cet article :
www.lepoint.fr/economie/document.html?did=169881
[^] # Re: Dangereux ou honête ?
Posté par Agrou (site web personnel) . En réponse à la dépêche Google, futur grand méchant loup ?. Évalué à 1.
J'ai essayé de retrouver l'article sur leur site mais l'accès est payant. Si quelqu'un est abonné à ce magasine il pourra sûrement donner plus d'informations.
Par contre quand je parle du "patriot act" c'est plus parce que cette volonté d'en savoir toujours plus sur les gens m'y a fait penser, et que Google contribue activement à ça. J'espère que toutes ces informations ne servent qu'a des publicitaires, mais si des politiques s'en mêlent je ne sait pas ou ça nous mènera.
[^] # Re: Dangereux ou honête ?
Posté par Agrou (site web personnel) . En réponse à la dépêche Google, futur grand méchant loup ?. Évalué à 4.
De plus google est de plus en plus incontournable, s'il est plus facile de changer de moteur de recherche que d'OS, google est déjà entré dans les moeurs. Et une entreprise qui à un aussi grand contrôle de l'information sur internet peut faire en sort d"éviter que nous utilisions autre chose.
[^] # Re: Commentaire de Microsoft!
Posté par Agrou (site web personnel) . En réponse à la dépêche BBC World : Documentaire sur les logiciels libres. Évalué à 2.
Maintenant c'est peut etre pas faux de dire que "La communauté Open Source stimule l'innovation dans le domaine des logiciels.", c'est le principe de la concurence et sa doit les changer d'en avoir un peu.
# Le pire ?
Posté par Agrou (site web personnel) . En réponse à la dépêche DADVSI : l'interopérabilité disparait. Évalué à 3.
C'était possible de faire pire que sa ?
[^] # Re: Et la légéreté ?
Posté par Agrou (site web personnel) . En réponse à la dépêche Annonce du projet Phonon. Évalué à 6.
Je me demande juste si ce projet ne démarre pas un peu tard par rapport au reste de kde4 qui devrai en théorie sortir a la fin de l'année vers octobre je crois.
[^] # Re: Ma mienne
Posté par Agrou (site web personnel) . En réponse au sondage Ma résolution pour 2006. Évalué à -1.
[^] # Re: Ma mienne
Posté par Agrou (site web personnel) . En réponse au sondage Ma résolution pour 2006. Évalué à 6.
[^] # Re: CVS d'amsn
Posté par Agrou (site web personnel) . En réponse à la dépêche Gaim 1.5.0 est sorti. Évalué à 1.
http://gaim-vv.sourceforge.net/(...)
[^] # Re: GCC
Posté par Agrou (site web personnel) . En réponse au message Wifi avec une carte MSI PC52G2 sous kubuntu. Évalué à 1.
Sa a l'air interressant cette commande, je ne m'en était jamais servi, elle fait quoi exactement ?
Pour la solution qui consiste à utilies les drivers windows j'aimerai autant éviter surtout que sa a l'air jouable avec des drivers libres.
Par contre je me demande si ma carte sera un jour detectée lors de l'installation de ma distrib (a moins que cela ne dépende de la version du noyau ??) ou s'il faudra continuer à installer des drivers manuellement ?
[^] # Re: Sa ne marche pas
Posté par Agrou (site web personnel) . En réponse au message Modification de source.list sous kubuntu. Évalué à 1.
Merci du coup de main
[^] # Re: Sa ne marche pas
Posté par Agrou (site web personnel) . En réponse au message Modification de source.list sous kubuntu. Évalué à 1.
A priori il ne trouve tout simplement pas les sources....
[^] # Sa ne marche pas
Posté par Agrou (site web personnel) . En réponse au message Modification de source.list sous kubuntu. Évalué à 1.
Je ne sait pas trop quoi faire du coup.