This Configuration Utility Application was developed by Qt/X11 Free Edition.
You can install the Qt/X11 Free Edition development when install the Linux OS by
selecting the Qt/X11 development package or you can find it on Trolltech's website.
http://www.trolltech.com/
ftp://ftp.trolltech.com/qt/source/qt-x11-free-3.3.4.tar.gz After install the package then follow the steps.
1.) qmake -o Makefile raconfig2500.pro
2.) make
Q2. Compile Option
About Message Print:
In the DebugPrint.h file, you have 3 options to select how to print message.
(1) If you set "#define DEBUG_PRINT_TO_WHERE DEBUG_PRINT_TO_NULL", it print nothing.
(2) If you set "#define DEBUG_PRINT_TO_WHERE DEBUG_PRINT_TO_FILE", it print to /tmp/raconfig2500.dbg. You can type "tail -f /tmp/raconfig2500.dbg" to monitor at real time.
(3) If you set "#define DEBUG_PRINT_TO_WHERE DEBUG_PRINT_TO_QTVIEW", type "./RaConfig2500" and see the print message.
Q3. Problem About RaConfig Usage
After you bring up the RaConfig2500 Utility, and you can't see the Access-Point list in the SiteSurveyPage.
Why? That's you need type "ifconfig rausb0 up" before you bring up the RaConfig2500 Utility, and after the rt2570.ko module is installed.
Q4. Problem About Connect to Internet
The RaConfig2500 Utility don't help you process some commands like "dhclient" or "dhcpcd" or other gateway command.
So you need type "dhclient rausb" in command lines to get a dynamic ip address.
For the more details, you can see the rt2570 driver's readme.
This is a linux device driver for Ralink RT2500USB b/g WLAN Card.
This driver implements basic 802.11 function.
Infrastructure and Ad-hoc mode with open or shared or wpapsk or wpa2psk authentication method.
WEP-40 and WEP-104 or tkip or aes encryption.
Example I: Config STA to link with AP and OPEN/NONE(Authentication/Encryption)
1. iwconfig rausb0 mode Managed
2. iwconfig rausb0 key off
3. iwconfig rausb0 essid "AP's SSID"
Example II: Config STA to link as Ad-hoc mode and OPEN/NONE(Authentication/Encryption)
1. iwconfig rausb0 mode ad-hoc
2. iwconfig rausb0 key off
3. iwconfig rausb0 essid "Desired SSID"
Example III: Config STA to link with AP and OPEN/WEP(Authentication/Encryption).
Default Key ID = 3
1. iwconfig rausb0 key [3]
2. iwconfig rausb0 key s:abcde
3. iwconfig rausb0 essid "AP's SSID"
Example IV: Config STA to link with ad-hoc mode and WPAPSK/TKIP(Authentication/Encryption)
WPA PreShared-Key is 12345678
1. iwconfig rausb0 mode ad-hoc
2. iwpriv rausb0 auth 4
3. iwpriv rausb0 enc 3
4. iwconfig rausb0 essid "Desired SSID"
5. iwpriv rausb0 wpapsk 12345678
6. iwconfig rausb0 essid "Desired SSID"
Example V: Config STA to link with AP and WPAPSK/AES(Authentication/Encryption)
WPA PreShared-Key is 12345678
1. iwpriv rausb0 enc 4
2. iwpriv rausb0 auth 3
3. iwconfig rausb0 essid "AP's SSID"
4. iwpriv rausb0 wpapsk 12345678
5. iwconfig rausb0 essid "AP's SSID"
Example VI: Config STA to link with AP and WPA2PSK/TKIP(Authentication/Encryption)
WPA PreShared-Key is 12345678
1. iwpriv rausb0 enc 3
2. iwpriv rausb0 auth 4
3. iwconfig rausb0 essid "AP's SSID"
4. iwpriv rausb0 wpapsk 12345678
5. iwconfig rausb0 essid "AP's SSID"
p.s Step 2 is part of generating wpapsk password and is necessary.
```
[^] # Re: tu as un .tar
Posté par ondemands . En réponse au message superpass spfpg13. Évalué à 1.
modprobe: invalid option—'l'
-
ubuntu 14.
# il y a un deuxieme readme
Posté par ondemands . En réponse au message superpass spfpg13. Évalué à -1.
Q1. How to compile
This Configuration Utility Application was developed by Qt/X11 Free Edition.
You can install the Qt/X11 Free Edition development when install the Linux OS by
selecting the Qt/X11 development package or you can find it on Trolltech's website.
After install the package then follow the steps.http://www.trolltech.com/
ftp://ftp.trolltech.com/qt/source/qt-x11-free-3.3.4.tar.gz
1.) qmake -o Makefile raconfig2500.pro
2.) make
Q2. Compile Option
Q3. Problem About RaConfig Usage
After you bring up the RaConfig2500 Utility, and you can't see the Access-Point list in the SiteSurveyPage.
Why? That's you need type "ifconfig rausb0 up" before you bring up the RaConfig2500 Utility, and after the rt2570.ko module is installed.
Q4. Problem About Connect to Internet
The RaConfig2500 Utility don't help you process some commands like "dhclient" or "dhcpcd" or other gateway command.
So you need type "dhclient rausb" in command lines to get a dynamic ip address.
For the more details, you can see the rt2570 driver's readme.
# voila le readme
Posté par ondemands . En réponse au message superpass spfpg13. Évalué à -1.
Sommaire
===============================================================================================
ModelName:
RT2500USB
===============================================================================================
Driver lName:
rt2570.ko
===============================================================================================
Ralink Hardware:
Ralink 802.11b/g wireless network card.
===============================================================================================
Description:
This is a linux device driver for Ralink RT2500USB b/g WLAN Card.
This driver implements basic 802.11 function.
Infrastructure and Ad-hoc mode with open or shared or wpapsk or wpa2psk authentication method.
WEP-40 and WEP-104 or tkip or aes encryption.
===============================================================================================
Compatibility:
Testing has been done with LinEX kernel 2.6.9, Fedora Core 3.
You may encounter some rough edges when working with recent other Linux kernels branch.
===============================================================================================
FILE LAYOUT:
*.c : c files
*.h : header files
Makefile.6 :Makefile for kernel 2.6
Makefile.4 :Makefile for kernel 2.4
./LINUX_RACONFIG_Vx.x.x.x : source code for utility RaConfig2500 version x.x.x.x
./LINUX_RACONFIG_Vx.x.x.x/bin/LINUX/RaConfig2500 : utility RaConfig2500
===============================================================================================
Build Instructions:
0) $dos2unix *
$chmod 644 *
$chmod 755 Configure
1) cp Makefile.x Makefile // x is your kernel
2) $make
3) $insmod rt2570.ko # Insert driver module
4) $ifconfig rausb0 up # Bring up device
5) $dhclient rausb0 # Get network IP address
Note: Script functionality:
Configure retrive linux version
6) ./LINUX_RACONFIG_Vx.x.x.x/bin/"Linux"/RaConfig2500
if lack of libstdc++.so.6, cp ./LINUX_RACONFIG_Vx.x.x.x/libstdc++.so.6 /usr/lib
7)Edit(or add the line) in /etc/modules.conf
alias rausb0 rt2570
8) Create and edit 'ifcfg-rausb0' file in /etc/sysconfig/network-script/
DEVICE='rausb0'
ONBOOT='yes'
BOOTPROTO='dhcp'
===============================================================================================
CONFIGURATION:
RT2500 driver can be configured via following interfaces,
i.e. i)RaConfig2500, ii)wireless extension,
i) RaConfig2500 is utility for rt25usb.
ii) Wireless extension usage please refer to man page of 'iwconfig', 'iwlist' and 'iwpriv'.
Here is definition for private command 'iwpriv'
NAME
iwpriv - configure optionals (private) parameters of a wireless network
interface
SYNOPSIS
iwpriv [interface]
iwpriv [interface] [parameters] [val]
DESCRIPTION
[interface] [parameters] [val] explaination
rausb0 auth 1~5 1:Open
2:Shared
3:WPAPSK
4:WPA2PSK
5:WPANONE
rausb0 psm 0~1 0:Continuous wake up
1:power safe mode
rausb0 enc 1~4 1:none
2:wep
3:tkip
4:aes
rausb0 wpapsk 8~64 chars WPAPSK password
===============================================================================================
EXAMPLE:
Example I: Config STA to link with AP and OPEN/NONE(Authentication/Encryption)
1. iwconfig rausb0 mode Managed
2. iwconfig rausb0 key off
3. iwconfig rausb0 essid "AP's SSID"
Example II: Config STA to link as Ad-hoc mode and OPEN/NONE(Authentication/Encryption)
1. iwconfig rausb0 mode ad-hoc
2. iwconfig rausb0 key off
3. iwconfig rausb0 essid "Desired SSID"
Example III: Config STA to link with AP and OPEN/WEP(Authentication/Encryption).
Default Key ID = 3
1. iwconfig rausb0 key [3]
2. iwconfig rausb0 key s:abcde
3. iwconfig rausb0 essid "AP's SSID"
Example IV: Config STA to link with ad-hoc mode and WPAPSK/TKIP(Authentication/Encryption)
WPA PreShared-Key is 12345678
1. iwconfig rausb0 mode ad-hoc
2. iwpriv rausb0 auth 4
3. iwpriv rausb0 enc 3
4. iwconfig rausb0 essid "Desired SSID"
5. iwpriv rausb0 wpapsk 12345678
6. iwconfig rausb0 essid "Desired SSID"
Example V: Config STA to link with AP and WPAPSK/AES(Authentication/Encryption)
WPA PreShared-Key is 12345678
1. iwpriv rausb0 enc 4
2. iwpriv rausb0 auth 3
3. iwconfig rausb0 essid "AP's SSID"
4. iwpriv rausb0 wpapsk 12345678
5. iwconfig rausb0 essid "AP's SSID"
Example VI: Config STA to link with AP and WPA2PSK/TKIP(Authentication/Encryption)
WPA PreShared-Key is 12345678
1. iwpriv rausb0 enc 3
2. iwpriv rausb0 auth 4
3. iwconfig rausb0 essid "AP's SSID"
4. iwpriv rausb0 wpapsk 12345678
5. iwconfig rausb0 essid "AP's SSID"
p.s Step 2 is part of generating wpapsk password and is necessary.
```
[^] # Re: tu as un .tar
Posté par ondemands . En réponse au message superpass spfpg13. Évalué à 0.
tar: SuperUSB-Linux.tar : open impossible: Aucun fichier ou dossier de ce type
tar: Error is not recoverable: exiting now