bonjour à tous
j'ai fait hier la mise à jour de jessie maté sur ma partition dédié à jessie maté
(je conserve la partition squeeze parce qu'il y a gnome tradition dedans)
l'icone du network-manager tourne comme d'habitude et les deux points vert s'allument mais ne se connecte plus sur mon domino wifi/4G de chez orange que j'ai
cela fonctionne bien en boutant sur ma partition squeeze et j'ai la connexion en ipv6 grâce à miredo
c'était mieux avant
voici ce qu'en dit mon gxconsole:
2014-07-27T11:34:34.644457+02:00 localhost NetworkManager[522]: <info> Activation (wlan0) starting connection 'Domino-15BA'
2014-07-27T11:34:34.645031+02:00 localhost NetworkManager[522]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
2014-07-27T11:34:34.645436+02:00 localhost NetworkManager[522]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
2014-07-27T11:34:34.645832+02:00 localhost NetworkManager[522]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
2014-07-27T11:34:34.646228+02:00 localhost NetworkManager[522]: <info> NetworkManager state is now CONNECTING
2014-07-27T11:34:34.646647+02:00 localhost NetworkManager[522]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
2014-07-27T11:34:34.647046+02:00 localhost NetworkManager[522]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
2014-07-27T11:34:34.647446+02:00 localhost NetworkManager[522]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
2014-07-27T11:34:34.647841+02:00 localhost NetworkManager[522]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
2014-07-27T11:34:34.650045+02:00 localhost NetworkManager[522]: <info> Activation (wlan0/wireless): access point 'Domino-15BA' has security, but secrets are required.
2014-07-27T11:34:34.650268+02:00 localhost NetworkManager[522]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
2014-07-27T11:34:34.650462+02:00 localhost NetworkManager[522]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
2014-07-27T11:34:34.652077+02:00 localhost NetworkManager[522]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
2014-07-27T11:34:34.652297+02:00 localhost NetworkManager[522]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
2014-07-27T11:34:34.652479+02:00 localhost NetworkManager[522]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
2014-07-27T11:34:34.652662+02:00 localhost NetworkManager[522]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
2014-07-27T11:34:34.652842+02:00 localhost NetworkManager[522]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
2014-07-27T11:34:34.653022+02:00 localhost NetworkManager[522]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
2014-07-27T11:34:34.653202+02:00 localhost NetworkManager[522]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
2014-07-27T11:34:34.653386+02:00 localhost NetworkManager[522]: <info> Activation (wlan0/wireless): connection 'Domino-15BA' has security, and secrets exist. No new secrets needed.
2014-07-27T11:34:34.653571+02:00 localhost NetworkManager[522]: <info> Config: added 'ssid' value 'Domino-15BA'
2014-07-27T11:34:34.653753+02:00 localhost NetworkManager[522]: <info> Config: added 'scan_ssid' value '1'
2014-07-27T11:34:34.653932+02:00 localhost NetworkManager[522]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
2014-07-27T11:34:34.654633+02:00 localhost NetworkManager[522]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
2014-07-27T11:34:34.654856+02:00 localhost NetworkManager[522]: <info> Config: set interface ap_scan to 1
2014-07-27T11:34:34.685255+02:00 localhost NetworkManager[522]: <info> (wlan0): supplicant interface state: inactive -> scanning
2014-07-27T11:34:35.582490+02:00 localhost kernel: [ 346.004026] wlan0: authenticate with f6:dc:f9:95:15:bb
2014-07-27T11:34:35.582831+02:00 localhost wpa_supplicant[940]: wlan0: SME: Trying to authenticate with f6:dc:f9:95:15:bb (SSID='Domino-15BA' freq=2412 MHz)
2014-07-27T11:34:35.594220+02:00 localhost NetworkManager[522]: <info> (wlan0): supplicant interface state: scanning -> authenticating
2014-07-27T11:34:35.594722+02:00 localhost kernel: [ 346.017054] wlan0: send auth to f6:dc:f9:95:15:bb (try 1/3)
2014-07-27T11:34:35.598517+02:00 localhost kernel: [ 346.022738] wlan0: authenticated
2014-07-27T11:34:35.598561+02:00 localhost wpa_supplicant[940]: wlan0: Trying to associate with f6:dc:f9:95:15:bb (SSID='Domino-15BA' freq=2412 MHz)
2014-07-27T11:34:35.602595+02:00 localhost kernel: [ 346.024348] wlan0: AP has invalid WMM params (AIFSN=1 for ACI 0), disabling WMM
2014-07-27T11:34:35.605658+02:00 localhost wpa_supplicant[940]: wlan0: Associated with f6:dc:f9:95:15:bb
2014-07-27T11:34:35.605921+02:00 localhost NetworkManager[522]: <info> (wlan0): supplicant interface state: authenticating -> associating
2014-07-27T11:34:35.606504+02:00 localhost kernel: [ 346.027136] wlan0: associate with f6:dc:f9:95:15:bb (try 1/3)
2014-07-27T11:34:35.606512+02:00 localhost kernel: [ 346.029788] wlan0: RX AssocResp from f6:dc:f9:95:15:bb (capab=0x411 status=0 aid=2)
2014-07-27T11:34:35.606514+02:00 localhost kernel: [ 346.029850] wlan0: associated
2014-07-27T11:34:35.606515+02:00 localhost kernel: [ 346.029862] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
2014-07-27T11:34:35.611344+02:00 localhost NetworkManager[522]: <info> (wlan0): supplicant interface state: associating -> associated
2014-07-27T11:34:36.872449+02:00 localhost wpa_supplicant[940]: wlan0: WPA: Key negotiation completed with f6:dc:f9:95:15:bb [PTK=CCMP GTK=TKIP]
2014-07-27T11:34:36.872989+02:00 localhost wpa_supplicant[940]: wlan0: CTRL-EVENT-CONNECTED - Connection to f6:dc:f9:95:15:bb completed (auth) [id=0 id_str=]
2014-07-27T11:34:36.873389+02:00 localhost NetworkManager[522]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
2014-07-27T11:34:36.877875+02:00 localhost NetworkManager[522]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
2014-07-27T11:34:36.878407+02:00 localhost NetworkManager[522]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Domino-15BA'.
2014-07-27T11:34:36.878839+02:00 localhost NetworkManager[522]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
2014-07-27T11:34:36.879129+02:00 localhost NetworkManager[522]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
2014-07-27T11:34:36.879410+02:00 localhost NetworkManager[522]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
2014-07-27T11:34:36.879692+02:00 localhost NetworkManager[522]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
2014-07-27T11:34:37.227447+02:00 localhost NetworkManager[522]: <info> dhclient started with pid 1536
2014-07-27T11:34:37.227781+02:00 localhost NetworkManager[522]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
2014-07-27T11:34:37.232334+02:00 localhost dhclient: irs_resconf_load failed: 59.
2014-07-27T11:34:37.232670+02:00 localhost dhclient: Can't initialize context: invalid address format
2014-07-27T11:34:37.232864+02:00 localhost dhclient:
2014-07-27T11:34:37.233047+02:00 localhost dhclient: If you think you have received this message due to a bug rather
2014-07-27T11:34:37.233234+02:00 localhost dhclient: than a configuration issue please read the section on submitting
2014-07-27T11:34:37.233426+02:00 localhost dhclient: bugs on either our web page at www.isc.org or in the README file
2014-07-27T11:34:37.233608+02:00 localhost dhclient: before submitting a bug. These pages explain the proper
2014-07-27T11:34:37.233790+02:00 localhost dhclient: process and the information we find helpful for debugging..
2014-07-27T11:34:37.233979+02:00 localhost dhclient:
2014-07-27T11:34:37.234164+02:00 localhost dhclient: exiting.
2014-07-27T11:34:37.234369+02:00 localhost NetworkManager[522]: irs_resconf_load failed: 59.
2014-07-27T11:34:37.234717+02:00 localhost NetworkManager[522]: Can't initialize context: invalid address format
2014-07-27T11:34:37.234951+02:00 localhost NetworkManager[522]: If you think you have received this message due to a bug rather
2014-07-27T11:34:37.235183+02:00 localhost NetworkManager[522]: than a configuration issue please read the section on submitting
2014-07-27T11:34:37.235414+02:00 localhost NetworkManager[522]: bugs on either our web page at www.isc.org or in the README file
2014-07-27T11:34:37.236948+02:00 localhost NetworkManager[522]: before submitting a bug. These pages explain the proper
2014-07-27T11:34:37.237195+02:00 localhost NetworkManager[522]: process and the information we find helpful for debugging..
2014-07-27T11:34:37.237440+02:00 localhost NetworkManager[522]: exiting.
2014-07-27T11:34:37.237675+02:00 localhost NetworkManager[522]: <info> (wlan0): DHCPv4 client pid 1536 exited with status 1
2014-07-27T11:34:37.237920+02:00 localhost NetworkManager[522]: <info> Activation (wlan0) Stage 4 of 5 (IPv4 Configure Timeout) scheduled...
2014-07-27T11:34:37.238717+02:00 localhost NetworkManager[522]: <info> Activation (wlan0) Stage 4 of 5 (IPv4 Configure Timeout) started...
2014-07-27T11:34:37.238937+02:00 localhost NetworkManager[522]: <info> (wlan0): device state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5]
2014-07-27T11:34:37.239292+02:00 localhost NetworkManager[522]: <info> NetworkManager state is now DISCONNECTED
2014-07-27T11:34:37.239567+02:00 localhost NetworkManager[522]: <warn> Activation (wlan0) failed for connection 'Domino-15BA'
2014-07-27T11:34:37.239779+02:00 localhost NetworkManager[522]: <info> Activation (wlan0) Stage 4 of 5 (IPv4 Configure Timeout) complete.
2014-07-27T11:34:37.240003+02:00 localhost NetworkManager[522]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0]
2014-07-27T11:34:37.240217+02:00 localhost NetworkManager[522]: <info> (wlan0): deactivating device (reason 'none') [0]
2014-07-27T11:34:37.242477+02:00 localhost kernel: [ 347.662838] wlan0: deauthenticating from f6:dc:f9:95:15:bb by local choice (reason=3)
2014-07-27T11:34:37.250576+02:00 localhost kernel: [ 347.670589] cfg80211: Calling CRDA to update world regulatory domain
2014-07-27T11:34:37.260509+02:00 localhost wpa_supplicant[940]: wlan0: CTRL-EVENT-DISCONNECTED bssid=00:00:00:00:00:00 reason=3
2014-07-27T11:34:37.260895+02:00 localhost NetworkManager[522]: <info> (wlan0): supplicant interface state: completed -> disconnected
2014-07-27T11:34:37.278484+02:00 localhost kernel: [ 347.700598] cfg80211: World regulatory domain updated:
2014-07-27T11:34:37.278503+02:00 localhost kernel: [ 347.700603] cfg80211: DFS Master region: unset
2014-07-27T11:34:37.278504+02:00 localhost kernel: [ 347.700604] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
2014-07-27T11:34:37.278505+02:00 localhost kernel: [ 347.700607] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
2014-07-27T11:34:37.278506+02:00 localhost kernel: [ 347.700608] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
2014-07-27T11:34:37.278507+02:00 localhost kernel: [ 347.700610] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
2014-07-27T11:34:37.278508+02:00 localhost kernel: [ 347.700611] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
2014-07-27T11:34:37.278509+02:00 localhost kernel: [ 347.700613] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
2014-07-27T11:34:37.278509+02:00 localhost kernel: [ 347.700614] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
# dhcp
Posté par robertix . Évalué à -10.
en configurant manuellement les paramètres ipv4 dans le network-manager cela se connecte bien
[^] # Re: dhcp
Posté par robertix . Évalué à -10. Dernière modification le 27 juillet 2014 à 13:32.
puis j'ai installé les paquets debug,éffacer la connexion Domino-15BA,recréer la connexion Domino-15BA et cela fonctionne en paramétrage DHCP
trop fort
le gxconsole:
# Comme quoi…
Posté par Marotte ⛧ . Évalué à 6.
Ça fonctionne mieux avec systemd.
Suivre le flux des commentaires
Note : les commentaires appartiennent à celles et ceux qui les ont postés. Nous n’en sommes pas responsables.