Mais j'ai un peu peur que cela ote toute envie à Macromédia de sortir un jour un version linux de leur produit. Déjà, si il pouvait faire un plugin flash convenable et pas cette affreux truc buggé et lent.
Oui, car ce dont tu parles n'est pas encore correctement intégrée par tous les navigateurs du marché voir même pas encore ou que tres fraichement définis chez W3C.
Donc, en attendant, vu que nous ne sommes pas dans le meilleur des mondes, on utilise ce qui se fait de mieux en la matière matière tout en gardant à l'esprit que le code produit pourrait être optimisé et en espérant que cela s'améliore un jour ;-) (Et tu peux le traiter de tout les noms, mais Dreamweaver n'est pas une usine à gaz, il s'agit de faire des sites, pas des pages perso, donc c'est normal qu'il intègre une serie d'outil dont tu ne vois pas l'utilité immédiatement, de plus, il tourne de façon impeccable sur toutes nos machines qui ne sont pas toutes des foudres de guerre).
Histoire de bien bloquer toutes les ondes, tu peux rajouter un gros meuble en bois remplie de farde et de document ainsi qu'une porte ouverte en permanence (et donc contre le mur). Avec ça, l'effet est garanti: le bureau juste à côté est incapable de se connecter sur l'AP. Tu es en sécurité. Et tant pis si tu t'es equipé en Wifi pour eviter d'avoir un cable entre les deux pièces :-| (par contre, ça passe magnifiquement bien les étages)
Je m'apercois aussi qu'il n'y a pas moyen de lui dire de ne jamais afficher les messages en HTML et encore moins de les composer... (ou alors, c'est bien caché)
J'ai donc tracé tout ça, et j'ai verifié les librairies utilisés.
Il semblerai que le problème vienne de libldap2 qui est en version 2.1.22 (celle de testing) alors que mon slapd est en version 2.0.23-6.3. Malheureusement, je ne sais pas remettre la version 2.0.23 de cette librairie à cause de probleme de dependence.
Donc, soit je risque le coup et je reinstalle chaqun des paquets dependant (avec le parametre --reinstall) mais avec le risque que je casse tout. Soit j'etudie les changements entre les schemas des deux versions de slapd.
Je vais pour le moment opter pour la seconde solution, si je ne m'en sors pas, j'ai tout le week-end pour réparer le systeme (sans les utilisateurs qui me demande toutes les 10 minutes: "alors, ça marche ? je peux faire ceci ?" ;-)
Et la verdict est qu'il produit un "Segmentation fault".
Que l'annuaire soit vide de données ou non.
Hmm, ca veut dire que quelque chose sur le systeme n'est plus comme avant et que cela ne plait pas du tout à slapd.
2) J'hesite, car il ne me semble pas que ce soit un bug ou un probleme de slapd dans la mesure ou tout fonctionnait chrome nickel jusqu'à hier... Mais je vais quand même aller lire leurs archives
3) J'ai vais essayer ça, il me semble que core.schema est beaucoup plus petit que la précédente version.
4) lorsque que veux remettre mes données sauvergadée dans un fichier ldif ou lorsque que pars de rien et que j'utilise migrationtools (qui pourtant fonctionnait bien avant, mais avant quoi ?)
5) heu, il se plaint que tel et tel attribut ne soient pas défini dans les schémas, mais je vais retrourner voir du coté de slapd stable (2.0.23-6.3) avant de continuer à explorer le problème de la nouvelle version
Merci en tout cas pour tes indices et questions/réponses
Je ne sais pas quel est la situation en France mais bon nombre d'isp large bande (adsl/cable) en Belgique bloquent une serie de port à cet effet: 137-139 pour la pluspart, 25 pour quelques uns (pour contrer le spam), tout ceux <1024 pour les mauvais ISP cable....
Il a juste réussit à prouver que son nouveau disque SCSI est plus rapide que son disque IDE et que son ancien disque SCSI dans le cas d'un traitement d'un gros fichier. C'est un peu léger-léger pour servir d'argument dans la grande bataille de "C'est moi qui est le plus mieux que le tien" ;-)
Je constate que certain ne réalise pas le poison qu'est le tabac: tu as une dépendance terrible, c'est très dur de s'arreter par soi-même (ce qui ne veut pas dire que c'est impossible). Et quand bien même tu as arrêté, c'est très dur de ne pas recommencer.
tout à fait, mon message va dans ce sens mais je me suis peut-être mal exprimé: lorse que je lis un mail en HTML avec Outlook Express ou Sylpheed, je le vois en mode texte si il existe une version texte et si ce n'est pas le cas, je vois le resultat en mode texte du rendu html (cad dire, texte brute, sans font, gras, sousligné et cie).
Thunderbird n'a pas l'air de proposer cette option malheureusement.
Par contre, je ne vois pas le rapport à la police ... ?
Est-ce qu'il force le rendu HTML en mode texte ? Outlook Express et Sylpheed le font, mais je n'ai pas retrouvé cette importante fonction dans Thunderbird ? Mauvaise lunettes, changer de lunette ou fonction inexistante ?
Tout simplement par ce que les logiciels fournis viennet tous de la même boite: Microsoft, alors qu'avec Linux, tu as quasi autant de logiciel que de developpeur (j'exagere un peu).
Mais ça tu le savais déjà et moi je marche dans un début de troll ;-)
Nous l'utilisons pour tous nos clients, aucun ne s'est plaint jusqu'à présent (comprendre: il fait bien son boulot). Du côté de l'admin, on est content également :-).
J'avais aussi lu ça aussi (à propos d'une usine à Taiwan ?) mais je ne sais pas si nos disques (des IBM-Hitachi donc, bien vu plus haut ;-) ) font parti de cette série; ils ont été acheté entre novembre 2001 et fevrier 2002.
Ton IBM est un Deskstar ou quelques choses comme ca ?
Car chez nous, nous avons du leur en renvoyer 3 (un de 40 et deux de 60) pour cause de defaillance (sale bruit de disque dur qui cherche en vain lors du demarage)
Verifie la garantie, elle court sur une assez longue periode et tu pourras recuperer un disque dur pour le prix d'un colis (+- 2 euro pour les frais de port vers la Hollande)
Je dirais que c'est agréable d'avoir une liste de contact centralisé pour tous tes contacs avec les groupe et sur 3 protocoles (enfin, 1: jabber).
On pourra imaginer que l'on gagner 2k de mémoire et 0.02% de charge CPU vu que nous sommes connecté sur un seule protocole ? :-) (c'est la passerelle qui travaille)
Heu ...
Personnelement, j'attends le client offrira la possibilié de groupé les contacts d'un amis sur plusieurs protocoles en un seul contact (Meta-contact). Kopete l'avait fait dans ses versions 0.6x.
# chouette mais ....
Posté par CopainJack (site web personnel, Mastodon) . En réponse à la dépêche Webmestres : vous pouvez aussi le faire sous Linux. Évalué à 2.
[^] # Re: je ne comprends pas
Posté par CopainJack (site web personnel, Mastodon) . En réponse à la dépêche Webmestres : vous pouvez aussi le faire sous Linux. Évalué à -1.
Donc, en attendant, vu que nous ne sommes pas dans le meilleur des mondes, on utilise ce qui se fait de mieux en la matière matière tout en gardant à l'esprit que le code produit pourrait être optimisé et en espérant que cela s'améliore un jour ;-) (Et tu peux le traiter de tout les noms, mais Dreamweaver n'est pas une usine à gaz, il s'agit de faire des sites, pas des pages perso, donc c'est normal qu'il intègre une serie d'outil dont tu ne vois pas l'utilité immédiatement, de plus, il tourne de façon impeccable sur toutes nos machines qui ne sont pas toutes des foudres de guerre).
[^] # Re: Olitec transforme vos prises de courant en port réseau
Posté par CopainJack (site web personnel, Mastodon) . En réponse au journal Olitec transforme vos prises de courant en port réseau. Évalué à 2.
# temps réel dur ?
Posté par CopainJack (site web personnel, Mastodon) . En réponse à la dépêche Sortie de RTAI 24.1.12. Évalué à 6.
Merci.
(des liens, c'est bon aussi)
[^] # Re: Migration vers Thunderbird
Posté par CopainJack (site web personnel, Mastodon) . En réponse au journal Migration vers Thunderbird. Évalué à 1.
# Re: Migration vers Thunderbird
Posté par CopainJack (site web personnel, Mastodon) . En réponse au journal Migration vers Thunderbird. Évalué à 1.
[^] # Re: Gros soucis avec slapd
Posté par CopainJack (site web personnel, Mastodon) . En réponse au journal Gros soucis avec slapd. Évalué à 2.
D'abord, merci pour vos tuyaux.
J'ai donc tracé tout ça, et j'ai verifié les librairies utilisés.
Il semblerai que le problème vienne de libldap2 qui est en version 2.1.22 (celle de testing) alors que mon slapd est en version 2.0.23-6.3. Malheureusement, je ne sais pas remettre la version 2.0.23 de cette librairie à cause de probleme de dependence.
Donc, soit je risque le coup et je reinstalle chaqun des paquets dependant (avec le parametre --reinstall) mais avec le risque que je casse tout. Soit j'etudie les changements entre les schemas des deux versions de slapd.
Je vais pour le moment opter pour la seconde solution, si je ne m'en sors pas, j'ai tout le week-end pour réparer le systeme (sans les utilisateurs qui me demande toutes les 10 minutes: "alors, ça marche ? je peux faire ceci ?" ;-)
# Re: Gros soucis avec slapd
Posté par CopainJack (site web personnel, Mastodon) . En réponse au journal Gros soucis avec slapd. Évalué à 1.
Et la verdict est qu'il produit un "Segmentation fault".
Que l'annuaire soit vide de données ou non.
Hmm, ca veut dire que quelque chose sur le systeme n'est plus comme avant et que cela ne plait pas du tout à slapd.
2) J'hesite, car il ne me semble pas que ce soit un bug ou un probleme de slapd dans la mesure ou tout fonctionnait chrome nickel jusqu'à hier... Mais je vais quand même aller lire leurs archives
3) J'ai vais essayer ça, il me semble que core.schema est beaucoup plus petit que la précédente version.
4) lorsque que veux remettre mes données sauvergadée dans un fichier ldif ou lorsque que pars de rien et que j'utilise migrationtools (qui pourtant fonctionnait bien avant, mais avant quoi ?)
5) heu, il se plaint que tel et tel attribut ne soient pas défini dans les schémas, mais je vais retrourner voir du coté de slapd stable (2.0.23-6.3) avant de continuer à explorer le problème de la nouvelle version
Merci en tout cas pour tes indices et questions/réponses
# Re: Scan de plage IP wanadoo : ca fait peur !
Posté par CopainJack (site web personnel, Mastodon) . En réponse au journal Scan de plage IP wanadoo : ca fait peur !. Évalué à 1.
# Hmmm
Posté par CopainJack (site web personnel, Mastodon) . En réponse à la dépêche Le SCSI plus rapide que l'IDE : mythe ou réalité ?. Évalué à 3.
[^] # Re: hausse du tabac
Posté par CopainJack (site web personnel, Mastodon) . En réponse au journal hausse du tabac. Évalué à 2.
# Re: Vos films cultes...
Posté par CopainJack (site web personnel, Mastodon) . En réponse au journal Vos films cultes.... Évalué à 3.
A moins que ce soit dans ta Todo List ;-)
[^] # Re: Thunderbird...mise en exploitation
Posté par CopainJack (site web personnel, Mastodon) . En réponse au journal Thunderbird...mise en exploitation. Évalué à 1.
Thunderbird n'a pas l'air de proposer cette option malheureusement.
Par contre, je ne vois pas le rapport à la police ... ?
[^] # Re: Thunderbird...mise en exploitation
Posté par CopainJack (site web personnel, Mastodon) . En réponse au journal Thunderbird...mise en exploitation. Évalué à 1.
[^] # Re: Expressions Régulières
Posté par CopainJack (site web personnel, Mastodon) . En réponse au journal Expressions Régulières. Évalué à 1.
Rien que sur la cette page de doc de Php, les deux termes sont utilisés (histoire de semer encore plus le doute ;-) ):
http://php.planetmirror.com/manual/fr/ref.regex.php(...)
[^] # Re: Linux plus simple que Windows ?
Posté par CopainJack (site web personnel, Mastodon) . En réponse au journal Linux plus simple que Windows ?. Évalué à 3.
Mais ça tu le savais déjà et moi je marche dans un début de troll ;-)
# SquirrelMail
Posté par CopainJack (site web personnel, Mastodon) . En réponse au journal Choix d'un webmail. Évalué à 4.
Un maître-achat
[^] # Re: L'EUCD appliqué en Allemagne
Posté par CopainJack (site web personnel, Mastodon) . En réponse à la dépêche L'EUCD appliqué en Allemagne. Évalué à 1.
Mauvais système de défense,
Changer de système de défense.
Tu as élu des personnes pour te représenter, à toi de les convaincre que c'est un mauvais système.
[^] # Re: Une BD avec de la'informatique
Posté par CopainJack (site web personnel, Mastodon) . En réponse au journal Une BD avec de la'informatique. Évalué à 2.
D'après l'auteur: Cest lhistoire dun photographe fatigué, dune fille patiente, dhorreurs banales et dun chat pénible.
http://www.dargaud.com/index_include.cfm?Category=2_catalogue&R(...)
[^] # Re: Disques défectueux en cascade ...
Posté par CopainJack (site web personnel, Mastodon) . En réponse au journal Disques défectueux en cascade .... Évalué à 2.
# Re: Disques défectueux en cascade ...
Posté par CopainJack (site web personnel, Mastodon) . En réponse au journal Disques défectueux en cascade .... Évalué à 2.
Car chez nous, nous avons du leur en renvoyer 3 (un de 40 et deux de 60) pour cause de defaillance (sale bruit de disque dur qui cherche en vain lors du demarage)
Verifie la garantie, elle court sur une assez longue periode et tu pourras recuperer un disque dur pour le prix d'un colis (+- 2 euro pour les frais de port vers la Hollande)
http://www.hgst.com/warranty/(...)
# Re: N'importe quoi !
Posté par CopainJack (site web personnel, Mastodon) . En réponse au journal N'importe quoi !. Évalué à 4.
Mais c'est bien ça ;-)
[^] # Re: Les noms de projets qui veulent dire quelque chose
Posté par CopainJack (site web personnel, Mastodon) . En réponse au journal Les noms de projets qui veulent dire quelque chose. Évalué à 1.
[^] # Re: Passerelles à jour sur les serveurs Jabber ?
Posté par CopainJack (site web personnel, Mastodon) . En réponse au journal Passerelles à jour sur les serveurs Jabber ?. Évalué à 2.
Je dirais que c'est agréable d'avoir une liste de contact centralisé pour tous tes contacs avec les groupe et sur 3 protocoles (enfin, 1: jabber).
On pourra imaginer que l'on gagner 2k de mémoire et 0.02% de charge CPU vu que nous sommes connecté sur un seule protocole ? :-) (c'est la passerelle qui travaille)
Heu ...
Personnelement, j'attends le client offrira la possibilié de groupé les contacts d'un amis sur plusieurs protocoles en un seul contact (Meta-contact). Kopete l'avait fait dans ses versions 0.6x.
# Re: Bientot des épidémies de virus sous Linux ??
Posté par CopainJack (site web personnel, Mastodon) . En réponse au journal Bientot des épidémies de virus sous Linux ??. Évalué à 2.
"Windows is an inviting petri dish for viruses and worms, while Linux is a hostile environment for such nasties."
Ca résume tout ;-)