J'ai mis 20em pour la hauteur. À voir ce que cela donne dans la pratique, surtout que ça change beaucoup selon la résolution avec laquelle on affiche la dépêche.
ceux qui sont pour animateur, pour mettre l'accent sur le côté collaboratif (mais qui n'indique pas que ça se limite à la rédaction des dépêches)
ceux qui sont éditeur (ou des variantes), car c'est le terme qui est techniquement le plus juste (mais ça fait un peu trop penser à un travail personnel, dans son coin).
On départage comment ? Chacun choisit un camp et que le meilleur gagne ?
Perso, je préfère animateur à éditeur mais les deux me vont (et ils sont tous les deux bien mieux que rédacteur).
Le problème vient de MySQL : on utilise l'encodage utf8, au lieu d'utf8mb4 (qui n'était pas encore disponible dans la version de MySQL utilisée lorsque la base de données à été créée). L'encodage utf8 de mysql ne permet de stocker des caractères utf-8 que s'ils sont sur 3 caractères au plus.
Pour passer en utf8mb4, le plus simple a l'air d'être de dumper la base de données, modifier le dump pour remplacer toutes les occurrences d'utf8 par utf8mb4 dans la structure (pas les données, à faire à la main donc), puis réimporter le tout. Il faut également modifier l'encodage utilisé pour les connexions à la base de données.
Je vais quand même fermer cette entrée : elle n'a pas un gros succès (score de 1) et si l'autre entrée est implémentée, celle-ci n'a plus vraiment lieu d'être.
Ok, si je comprends bien, la force de gatejs, c'est d'être de pouvoir manipuler les requêtes en JavaScript et de pouvoir ainsi faire beaucoup de choses. Pour ceux qui préfèrent le JS au lua de nginx ou au golang de vulcan, j'imagine que ça doit être intéressant.
D'ailleurs, est-ce qu'il est également possible dans gatejs de modifier à la volée la configuration (genre un ajouter un serveur upsteram) ?
Gatejs pourrait être intéressant mais j'ai du mal à comprendre ce qu'il fait précisément et pourquoi il serait mieux que les autres solutions citées (ou haproxy dont la version 1.5 vient juste de sortir).
Il a été initialement conçu pour offrir plus de flexibilité sur l'interception et le traitement d'informations en HTTP.
Ce serait possible d'avoir un cas d'usage ? J'ai un peu regardé les exemples sur le wiki mais j'ai l'impression que je pourrais faire tout aussi bien avec les autres outils.
Les configurations sont écrites au moyen de la notation d'objets Javascript (JSON).
Dans le wiki, ce sont des modules nodejs avec une fonction qui renvoie un objet JavaScript. J'ai du mal à voir l'intérêt de cette approche. Ça va fait plus de bruit que juste un bout de JSON, mais sans permettre d'aller chercher des bouts de cette configuration dans un fichier, une base de données, une API Rest (il faudrait de l'asynchrone pour ça).
support SSL forward & reverse + SNI
Pour la prise en charge de SSL, est-ce que cela inclut les trucs sympas comme le Forward Secrecy ou l'OCSP stapling ? Quelle est la bibliothèque SSL utilisée ? OpenSSL ? GnuTLS ?
traitement des requêtes HTTP par un système de pipeline et d'opcodes
C'est-à-dire ? À quoi ressemble un opcode ?
support de l'exécution parallèle de plusieurs workers autonomes
Sur la même machine ? Comment se répartissent-ils le boulot ?
Je ne reproduis pas le problème. Est-ce qu'il serait possible d'avoir plus d'infos ? Par exemple, quel est le navigateur utilisé ? Est-ce que ça le fait pour d'autres sondages ? Est-ce que [ et ] fonctionnent ?
# Bon identifiant ?
Posté par Bruno Michel (site web personnel) . En réponse à l’entrée du suivi Problème d'identification. Évalué à 3 (+0/-0).
Si ce n'est pas le mot de passe qui pose problème, c'est peut être l'identifiant. Il ne faut pas oublier la majuscule au début : Popotao.
# Bug remonté upstream
Posté par Bruno Michel (site web personnel) . En réponse à l’entrée du suivi Les URL internationales ne marche pas. Évalué à 3 (+0/-0).
https://github.com/vmg/redcarpet/issues/408
[^] # Re: Bref
Posté par Bruno Michel (site web personnel) . En réponse à l’entrée du suivi Renommer les rédacteurs en animateurs. Évalué à 3 (+0/-0).
Fait. Cf https://github.com/linuxfrorg/linuxfr.org/commit/02ef1c2697abd7765483ff8c897fea909d8aa2f7
[^] # Re: Bref
Posté par Bruno Michel (site web personnel) . En réponse à l’entrée du suivi Renommer les rédacteurs en animateurs. Évalué à 3 (+0/-0).
Oui, c'est de ça dont je voulais parler.
# Fait
Posté par Bruno Michel (site web personnel) . En réponse à l’entrée du suivi Indiquer aux modérateurs de couper la dépêche. Évalué à 4 (+0/-0).
Cf https://github.com/linuxfrorg/linuxfr.org/commit/916bac610bc12ea32cf7e0750361305cc6947eb7
J'ai mis 20em pour la hauteur. À voir ce que cela donne dans la pratique, surtout que ça change beaucoup selon la résolution avec laquelle on affiche la dépêche.
# Bref
Posté par Bruno Michel (site web personnel) . En réponse à l’entrée du suivi Renommer les rédacteurs en animateurs. Évalué à 3 (+0/-0).
Si je résume, on a deux écoles :
On départage comment ? Chacun choisit un camp et que le meilleur gagne ?
Perso, je préfère animateur à éditeur mais les deux me vont (et ils sont tous les deux bien mieux que rédacteur).
[^] # Re: Animateur ? Gentil ?
Posté par Bruno Michel (site web personnel) . En réponse à l’entrée du suivi Renommer les rédacteurs en animateurs. Évalué à 4 (+0/-0).
Je crains que secrétaire de rédaction ne soit pas assez valorisant.
[^] # Re: Pratique
Posté par Bruno Michel (site web personnel) . En réponse à l’entrée du suivi Section apparaissant dans le titre de la dépêche en prévisualisation. Évalué à 3 (+0/-0).
Oui, c'est d'ailleurs pour ça que je l'avais laissé. Est-ce que quelqu'un a une alternative à proposer ?
# MySQL...
Posté par Bruno Michel (site web personnel) . En réponse à l’entrée du suivi Problème avec les caractères unicode. Évalué à 7 (+0/-0). Dernière modification le 24 août 2014 à 21:21.
Le problème vient de MySQL : on utilise l'encodage utf8, au lieu d'utf8mb4 (qui n'était pas encore disponible dans la version de MySQL utilisée lorsque la base de données à été créée). L'encodage utf8 de mysql ne permet de stocker des caractères utf-8 que s'ils sont sur 3 caractères au plus.
Pour passer en utf8mb4, le plus simple a l'air d'être de dumper la base de données, modifier le dump pour remplacer toutes les occurrences d'utf8 par utf8mb4 dans la structure (pas les données, à faire à la main donc), puis réimporter le tout. Il faut également modifier l'encodage utilisé pour les connexions à la base de données.
[^] # Re: Doublon
Posté par Bruno Michel (site web personnel) . En réponse à l’entrée du suivi Mettre le ola sur des dérives d'ortographe et autre perte de temps en pinaillage. Évalué à 2 (+0/-0).
Je vais quand même fermer cette entrée : elle n'a pas un gros succès (score de 1) et si l'autre entrée est implémentée, celle-ci n'a plus vraiment lieu d'être.
# Autre entrée de suivi similaire
Posté par Bruno Michel (site web personnel) . En réponse à l’entrée du suivi Mettre à part des commentaires concernant l'orthographe. Évalué à 3 (+0/-0).
http://linuxfr.org/suivi/mettre-le-ola-sur-des-derives-d-ortographe-et-autre-perte-de-temps-en-pinaillage
[^] # Re: Quelques questions
Posté par Bruno Michel (site web personnel) . En réponse à la dépêche Proxy HTTP(s) gatejs. Évalué à 7.
Ok, si je comprends bien, la force de gatejs, c'est d'être de pouvoir manipuler les requêtes en JavaScript et de pouvoir ainsi faire beaucoup de choses. Pour ceux qui préfèrent le JS au lua de nginx ou au golang de vulcan, j'imagine que ça doit être intéressant.
D'ailleurs, est-ce qu'il est également possible dans gatejs de modifier à la volée la configuration (genre un ajouter un serveur upsteram) ?
Par exemple, haproxy permet de faire ça via une socket UNIX et Vulcan via un outil en ligne de commande.
Heu… il a quand même fallu mettre à jour nodejs et relancer le service pour ne plus être vulnérable, j'imagine.
# Quelques questions
Posté par Bruno Michel (site web personnel) . En réponse à la dépêche Proxy HTTP(s) gatejs. Évalué à 10.
Gatejs pourrait être intéressant mais j'ai du mal à comprendre ce qu'il fait précisément et pourquoi il serait mieux que les autres solutions citées (ou haproxy dont la version 1.5 vient juste de sortir).
Ce serait possible d'avoir un cas d'usage ? J'ai un peu regardé les exemples sur le wiki mais j'ai l'impression que je pourrais faire tout aussi bien avec les autres outils.
Dans le wiki, ce sont des modules nodejs avec une fonction qui renvoie un objet JavaScript. J'ai du mal à voir l'intérêt de cette approche. Ça va fait plus de bruit que juste un bout de JSON, mais sans permettre d'aller chercher des bouts de cette configuration dans un fichier, une base de données, une API Rest (il faudrait de l'asynchrone pour ça).
Pour la prise en charge de SSL, est-ce que cela inclut les trucs sympas comme le Forward Secrecy ou l'OCSP stapling ? Quelle est la bibliothèque SSL utilisée ? OpenSSL ? GnuTLS ?
C'est-à-dire ? À quoi ressemble un opcode ?
Sur la même machine ? Comment se répartissent-ils le boulot ?
# Pas de chance
Posté par Bruno Michel (site web personnel) . En réponse à l’entrée du suivi commentaire suivi en oops. Évalué à 3 (+0/-0).
Tu es juste tombé au moment du backup, ça a visiblement bloqué l'écriture du commentaire.
[^] # Re: Plus d'infos ?
Posté par Bruno Michel (site web personnel) . En réponse à l’entrée du suivi bug : la navigation entre les commentaires ne fonctionne pas. Évalué à 3 (+0/-0).
Ce n'est pas grave, c'est le genre de soucis qui arrivent de temps en temps.
[^] # Re: Plus d'infos ?
Posté par Bruno Michel (site web personnel) . En réponse à l’entrée du suivi bug : la navigation entre les commentaires ne fonctionne pas. Évalué à 3 (+0/-0).
Il y a des extensions installées sur le firefox qui bug ?
# Plus d'infos ?
Posté par Bruno Michel (site web personnel) . En réponse à l’entrée du suivi bug : la navigation entre les commentaires ne fonctionne pas. Évalué à 3 (+0/-0).
Je ne reproduis pas le problème. Est-ce qu'il serait possible d'avoir plus d'infos ? Par exemple, quel est le navigateur utilisé ? Est-ce que ça le fait pour d'autres sondages ? Est-ce que
[
et]
fonctionnent ?# Corrigé
Posté par Bruno Michel (site web personnel) . En réponse à l’entrée du suivi Réorganisation de la dépêche sur Linux 3.15. Évalué à 4 (+0/-0).
Cf https://github.com/linuxfrorg/linuxfr.org/commit/578d525d23fbcc2a7b7c25ee62f483c9ae84f83b
[^] # Re: Pertinenter et inutiler.
Posté par Bruno Michel (site web personnel) . En réponse à l’entrée du suivi Compilation des problèmes sur mobile. Évalué à 3 (+0/-0).
Corrigé avec https://github.com/linuxfrorg/linuxfr.org/commit/0c1f23c355602167b524df7cf0fe86ef39f793ce
[^] # Re: Doublon
Posté par Bruno Michel (site web personnel) . En réponse à l’entrée du suivi Lien Pertinent ou Inutile invisible pour les contenus visualisés sur mobile. Évalué à 4 (+0/-0).
Au moins, ça m'a rappelé que je devais m'en occuper. Cf https://github.com/linuxfrorg/linuxfr.org/commit/0c1f23c355602167b524df7cf0fe86ef39f793ce
[^] # Re: Animateur ? Gentil ?
Posté par Bruno Michel (site web personnel) . En réponse à l’entrée du suivi Renommer les rédacteurs en animateurs. Évalué à 3 (+0/-0).
Pas d'autres propositions ?
[^] # Re: Genou
Posté par Bruno Michel (site web personnel) . En réponse à l’entrée du suivi Intégrer un twitter like DLFP pour remplacer le système de message privé interne. Évalué à 3 (+0/-0).
Oui, du coup, celle-ci fait doublon -> je la ferme.
# Autre demande similaire
Posté par Bruno Michel (site web personnel) . En réponse à l’entrée du suivi Espace de rédaction des journaux. Évalué à 3 (+0/-0).
http://linuxfr.org/suivi/brouillon-de-journaux
# Doublon
Posté par Bruno Michel (site web personnel) . En réponse à l’entrée du suivi Brouillon de journaux. Évalué à 4 (+0/-0).
http://linuxfr.org/suivi/espace-de-redaction-des-journaux
[^] # Re: OpenSSL 1.0.1h
Posté par Bruno Michel (site web personnel) . En réponse à la dépêche Nouvelle faille importante dans GnuTLS. Évalué à 5.
D'ailleurs, on cherche des volontaires pour écrire une dépêche sur ces failles de sécu.