Hum… 5To ou plus… si les données sont critiques pour toi¹, prévois d'effectuer régulièrement un duplicata sur un autre site ou d'échanger périodiquement des supports entre ton site "live" et un site externe - je le fais, mais avec un volume bien moindre.
¹ Cas de l'incendie ou du vol qui fait perdre l'ensemble des disques.
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
L'aspect temps réel n'es utile que si tu écoutes / visualise … en temps réel (en flux continu).
Dans la discussion c'est plus de la post-prod qui génère un fichier à partir de différentes sources. Ça prend le temps dont la machine a besoin pour faire les traitements, pas de temps réel.
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
si tu as un adaptateur USB/SATA accessible, tu peux peut-être booter sur un clonezila et dupliquer directement le disque qui fatigue vers les nouveau disque, sans passer par l'image intermédiaire…
Si la lecture du disque qui fatigue est vraiment difficile… il vaut peut-être mieux repartie sur une clean install sur le nouveau disque, et connecter ensuite l'ancien en USB pour y récupérer les données qui t'intéressent (avec les outils adaptés [*]).
[*] Le web indique des choses comme:
rsync --ignore-errors
ddrescue
dd_rescue
myrescue
foremost
magicrescue
photorec
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
«Une anecdote amusante est que si vous regardez la carte attentivement vous pourrez constater une anomalie. Juste à côté de la fameuse pompe se trouve une brasserie où il n’y a eu aucune victime.»
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
Tu tournes en version 15.10, de mémoire elle a 6 mois de mise à jour. Tu devrais migrer en 16.04, la dernière version LTS (Long Term Support = 5 ans de mises à jour) d'Ubuntu.
Pour info, le dernier MISC a pour thématique «Quelle sécurité pour l’Internet des objets ?».
Il y a une série d'articles sur la couche réseau à la base des communications sans fil du type domotique, avec des explications sur la structure des échanges et … sur les problèmes de sécurité (normal, c'est MISC).
C'est moins général: obligation de fournir, sur demande des gens à qui tu as fourni le logiciel, toutes les modifications que tu as apporté au code sous GPL.
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
Quand on fait un referendum sur un traité, et qu'ensuite il se trouve suffisamment de parlementaires pour s'asseoir dessus… ça refroidi par rapport à la classe politique.
D'ailleurs la campagne brexit m'a un peu rappelé celle du referendum sur le TCE.
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
Et la recherche de Free CURD app doit donner d'autres résultats.
Outre Kexi, Glom semble ressembler le plus à ce que tu cherches (une appli native), les autres sont souvent des outils web d'accès à des bases de données (donc nécessité d'installer un serveur du style Apache pour faire tourner le soft).
La question est la pérennité de ces outils. Ceci dit, si les données sont déjà dans une base standard accessible par d'autres moyens, tu n'es au moins pas verrouillé définitivement dans un soft.
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
[^] # Re: Précisions ?
Posté par lolop (site web personnel) . En réponse au message Archivage et sauvegarde : boitier ou NAS ?. Évalué à 2.
Hum… 5To ou plus… si les données sont critiques pour toi¹, prévois d'effectuer régulièrement un duplicata sur un autre site ou d'échanger périodiquement des supports entre ton site "live" et un site externe - je le fais, mais avec un volume bien moindre.
¹ Cas de l'incendie ou du vol qui fait perdre l'ensemble des disques.
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
[^] # Re: Mon expérience
Posté par lolop (site web personnel) . En réponse au journal Putain que la route est longue ! ! !. Évalué à 2.
L'aspect temps réel n'es utile que si tu écoutes / visualise … en temps réel (en flux continu).
Dans la discussion c'est plus de la post-prod qui génère un fichier à partir de différentes sources. Ça prend le temps dont la machine a besoin pour faire les traitements, pas de temps réel.
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
[^] # Re: Kdenlive
Posté par lolop (site web personnel) . En réponse au journal Putain que la route est longue ! ! !. Évalué à 3.
Tu fais du montage vidéo et tu as un problème d'espace disque ou mémoire?
Y'a un truc qui cloche.
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
# J'en suis toujours à confondre
Posté par lolop (site web personnel) . En réponse à la dépêche Sortie de la version 7.6 de Bokeh. Évalué à 3.
Avec Bokeh.
Et en cherchant la signification: «Le bokeh désigne la qualité du flou artistique d'arrière-plan d'une photographie.» (Wikipedia).
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
# Précisions ?
Posté par lolop (site web personnel) . En réponse au message Archivage et sauvegarde : boitier ou NAS ?. Évalué à 2.
Volume stocké / archivé ?
Type d'utilisation du NAS (hébergement des homes ou pas) ?
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
# Adaptateur USB ?
Posté par lolop (site web personnel) . En réponse au message Remplacement HD (fdisk, resize2fs et leurs amis). Évalué à 3.
Salut,
si tu as un adaptateur USB/SATA accessible, tu peux peut-être booter sur un clonezila et dupliquer directement le disque qui fatigue vers les nouveau disque, sans passer par l'image intermédiaire…
Si la lecture du disque qui fatigue est vraiment difficile… il vaut peut-être mieux repartie sur une clean install sur le nouveau disque, et connecter ensuite l'ancien en USB pour y récupérer les données qui t'intéressent (avec les outils adaptés [*]).
[*] Le web indique des choses comme:
rsync --ignore-errors
ddrescue
dd_rescue
myrescue
foremost
magicrescue
photorec
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
[^] # Re: Hello
Posté par lolop (site web personnel) . En réponse au message question sur les inodes. Évalué à 4.
Ou bien il peut supprimer quelques fichiers inutiles (ou temporaires s'ils sont sur le même FS).
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
[^] # Re: Idem, avec Kubuntu
Posté par lolop (site web personnel) . En réponse au message [Résolu] Démarrage devenu très lent. Évalué à 2.
Ok, donc
ps ux | grep akonadi
ne doit donner aucun process autre que legrep
.Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
# Lancement dans une console
Posté par lolop (site web personnel) . En réponse au message [Résolu] Kdenlive plante à l'ajout d'un clip. Évalué à 2.
Et regardes s'il n'affiche pas quelque chose avant de planter…
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
[^] # Re: Idem, avec Kubuntu
Posté par lolop (site web personnel) . En réponse au message [Résolu] Démarrage devenu très lent. Évalué à 2.
Tu n'utilises aucun de: KMail, KAddressBook, KOrganizer, KJots, KAlarm, ni widgets Plasma ?
Essaie tout de même
akonadictl status
dans une console, histoire de voir s'il n'est pas démarré malgré toi.Cf https://userbase.kde.org/Akonadi/fr
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
# Idem, avec Kubuntu
Posté par lolop (site web personnel) . En réponse au message [Résolu] Démarrage devenu très lent. Évalué à 2.
Ça semble un problème avec Akonadi: https://bugs.kde.org/show_bug.cgi?id=352779
Faudrait essayer en refermant complètement tout ce qui est lié à Akonadi avant de se déconnecter, afin qu'il ne le relance pas à la reconnexion…
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
[^] # Re: Dépendances à KDE
Posté par lolop (site web personnel) . En réponse à la dépêche digiKam change de rythme. Évalué à 5.
Tu as des problèmes de stockage ou de mémoire sur ta machine ?
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
[^] # Re: savon
Posté par lolop (site web personnel) . En réponse au journal Retour sur le « No poo ». Évalué à 6.
Oui… John Snow a révolutionné la médecine avec cette carte
«Une anecdote amusante est que si vous regardez la carte attentivement vous pourrez constater une anomalie. Juste à côté de la fameuse pompe se trouve une brasserie où il n’y a eu aucune victime.»
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
[^] # Re: Debian ?
Posté par lolop (site web personnel) . En réponse au message Reconversion appliance SonicWall. Évalué à 2.
Ah, et si tu as un OpenBSD, il peut générer ce qu'il faut pour pf.
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
[^] # Re: Debian ?
Posté par lolop (site web personnel) . En réponse au message Reconversion appliance SonicWall. Évalué à 2.
Il me semble que FirewallBuilder permet de générer les règles iptables et les télécharger via ssh.
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
[^] # Re: Je n'aime pas la SFML
Posté par lolop (site web personnel) . En réponse à la dépêche SDL ou SFML ? Ne choisissez plus, prenez Gamedev Framework (gf). Évalué à 5.
Pour moi les
assert
étaient un moyen de débogage qui sont supprimés lors de la compilation en mode release. Ça a changé ?Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
# Penser à changer de version
Posté par lolop (site web personnel) . En réponse au message erreur software updater. Évalué à 2.
Tu tournes en version 15.10, de mémoire elle a 6 mois de mise à jour. Tu devrais migrer en 16.04, la dernière version LTS (Long Term Support = 5 ans de mises à jour) d'Ubuntu.
Des pistes, en anglais:
En français:
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
# Non
Posté par lolop (site web personnel) . En réponse au message chercher un mot dans log.gz. Évalué à 2.
Non.
Avec un pipe tu dois pouvoir décompresser à la volée. Mais sans décompresser du tout, je ne vois pas comment ça pourrait fonctionner.
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
[^] # Re: Il y a une belle histoire là-dessous, mais elle est mal racontée
Posté par lolop (site web personnel) . En réponse à la dépêche GNU/Linux a son OCR de qualité. Évalué à 3.
R&D: Recherche & Développement j'imagine.
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
# [!HS] Articles sur le 802.15.4 dans MISC
Posté par lolop (site web personnel) . En réponse au message Domotique via TCP/IP(v6?) Wi-Fi standard ?. Évalué à 2.
Pour info, le dernier MISC a pour thématique «Quelle sécurité pour l’Internet des objets ?».
Il y a une série d'articles sur la couche réseau à la base des communications sans fil du type domotique, avec des explications sur la structure des échanges et … sur les problèmes de sécurité (normal, c'est MISC).
http://www.miscmag.com/
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
# [HS] Expression
Posté par lolop (site web personnel) . En réponse au journal Des vidéos qui envoient du bois. Évalué à 10.
<moment culture>
Je me demandais d'où l'expression «envoyer du bois» pouvait venir.
L'Internet me dit que ça viens des concours de force Basques, avec lancer de troncs d'arbres.
</moment culture>
Vous pouvez retourner à votre code.
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
[^] # Re: J'attends les contentieux
Posté par lolop (site web personnel) . En réponse au journal Nouvelles Open-Source de Bulgarie. Évalué à 2.
C'est moins général: obligation de fournir, sur demande des gens à qui tu as fourni le logiciel, toutes les modifications que tu as apporté au code sous GPL.
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
[^] # Re: Ironique
Posté par lolop (site web personnel) . En réponse au journal Bibliothèque d'Alexandrie des logiciels libres. Évalué à 5.
Si les sources ne sont pas publiées, l'INRIA n'y aura pas accès… la question ne se pose donc pas.
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
[^] # Re: Ambiance
Posté par lolop (site web personnel) . En réponse au journal Faut tout faire soi-même !. Évalué à 5.
Quand on fait un referendum sur un traité, et qu'ensuite il se trouve suffisamment de parlementaires pour s'asseoir dessus… ça refroidi par rapport à la classe politique.
D'ailleurs la campagne brexit m'a un peu rappelé celle du referendum sur le TCE.
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN
# Divers liens
Posté par lolop (site web personnel) . En réponse au message équivalent libre non buggé à access . Évalué à 5.
Dans mes bookmarks sur le sujet j'ai les entrées suivantes:
Et la recherche de Free CURD app doit donner d'autres résultats.
Outre Kexi, Glom semble ressembler le plus à ce que tu cherches (une appli native), les autres sont souvent des outils web d'accès à des bases de données (donc nécessité d'installer un serveur du style Apache pour faire tourner le soft).
La question est la pérennité de ces outils. Ceci dit, si les données sont déjà dans une base standard accessible par d'autres moyens, tu n'es au moins pas verrouillé définitivement dans un soft.
Votez les 30 juin et 7 juillet, en connaissance de cause. http://www.pointal.net/VotesDeputesRN