NamecoinToBind : il convertit les entrées de la BDD dans le format utilisé par le serveur DNS bind. Vous pouvez donc faire votre propre serveur DNS résolvant aussi les .bit
Comment cela s'utilise-t-il en pratique ? Toutes les X heures, récupérer l'annuaire Namecoin complet pour en faire une énorme zone DNS ?
Désolé mais j'ai vraiment du mal à comprendre. Je sais comment fonctionne le DNS, ce qu'est un enregistrement, mais là faute d'explication c'est difficile.
Visiblement, Namecoin se détache assez fortement du DNS, en introduisant un annuaire dont les clefs sont je ne sais quoi, et dont les valeurs sont un ensemble de données qui n'ont pas grand chose à voir avec le DNS. Ça me semblerait plus proche du système WHOIS qui est utilisé par les registres de niveau supérieur pour en dériver le contenu de leurs zones de délégation. Si quelqu'un pouvait préciser un peu comment cela fonctionne, en utilisant des notations humaines (c'est à dire pas ce qui précède), ce serait bienvenu.
C'est curieux, j'ai lu plusieurs fois cette longue description, et je n'ai pas trouvé la réponse à la première question qui me vient à l'esprit : quelle tête ça a, un nom de domaine Namecoin ?
Ce n'est pas seulement une question de pilote. Je vous rappelle qu'ARM n'est pas une plate-forme standard comme le PC à la IBM, mais seulement un jeu d'instructions de processeur. En particulier, il n'existe pas de moyen standard de démarrer un ordinateur à base d'ARM, ni d'énumérer son matériel.
En pratique, cela signifie que chaque système d'exploitation doit être spécifiquement adapté pour chaque modèle à prendre en charge. Que pour chaque nouveau modèle, il faut effectuer un travail de portage spécifique du noyau, de l'installateur et du système d'amorçage.
Avoir des pilotes systématiquement intégrés au noyau Linux serait une bonne chose, mais ça ne suffira pas à régler le problème. En particulier, les distributions GNU/Linux usuelles ne pourront jamais s'installer et fonctionner simplement sur plus d'une poignée de modèles.
Mais est ce que ça gère le fast-user switching de façon propre ?
Qu'est-ce que c'est que ce changement rapide d'utilisateur ? S'il s'agit de verrouiller l'écran de l'utilisateur existant puis lancer un nouvel écran de connexion sur tty8 et de laisse le nouvel utilisateur se connecter, c'est indépendant. Si c'est autre chose, ça sert à quoi au juste ?
Non, ou alors tu as été flou en décrivant ton problème. Le setgid sur un répertoire sert à ce que le groupe des fichiers créés dedans soit celui de ce répertoire. Il ne sert pas à ce que les permissions de groupe des fichiers créés soient celles du répertoire.
Pour ça, il y a les ACL. En particulier, les ACL par défaut d'un répertoire, qui permettent de préciser les ACL à appliquer aux fichiers créés dans ce répertoire.
Il faut monter ton système de fichiers avec l'option acl. Ensuite, avec setfact(1) :
En revanche je ne sais pas si c'est négatif ou non : dpkg utilise un algorithme qui définit un ordre sur les numéros de version, mais le terme « négatif » n'a pas vraiment de sens ici. Si on devait créer ce terme et lui donner un sens, tout ce que j'y verrait c'est « inférieur à zéro », donc 0~rc1 serait négatif…
Je lance l'installeur que j'ai trouvé sur le site de l'application,
Si : autopackage (qui s'appelle plutôt listaller aujourd'hui), 0install ou Glick2. S'ils utilisent autre chose c'est qu'ils souffrent de NIH.
Je la cherche et l'installe depuis le market.
Relis le titre du sondage : « Qu'utilisez vous pour l'installation de vos logiciels tiers ? » Dans ce contexte, « tiers » signifie : non disponible dans les dépôts de votre distribution.
la prise en charge du ~ à la fin du nom de fichier pour différencier les versions des paquets comme chez Debian (pour ajouter un ~beta, par exemple) ;
Pour être précis, le ~ est un caractère d'ordre négatif pour les numéros de versions. C'est à dire que 1.1~rc1 est inférieur à 1.1. Cela permet par exemple d'avoir les versions successives suivantes d'un logiciel :
Clairement : OSM et Google pâtissent d'être d'origine américaine, où il y a des grandes routes et des toutes petites routes, et pas grand chose entre les deux.
Un binaire avec toutes les dépendances liées en statique qui se lance gentiment depuis son dossier, c'est suffisant pour les jeux.
Problème de licence.
Question : comment font les gens pour les systèmes propriétaires ? Parce que bon, des bibliothèques propriétaires, tu as encore moins le droit de te lier statiquement avec non ?
[^] # Re: Freebox
Posté par 🚲 Tanguy Ortolo (site web personnel) . En réponse au journal Aujourd'hui c'est le « World IPv6 launch ». Évalué à 3.
Autant être précis : ce que tu veux, c'est pouvoir configurer le routeur IPv6 de la freebox.
# Montage
Posté par 🚲 Tanguy Ortolo (site web personnel) . En réponse au message xfce et gnome tablette. Évalué à 3.
S'il s'agit d'un disque dur fixe, c'est à définir dans le
fstab(5)
. Tu pourras être intéressé par les optionsnoauto
etuser
.[^] # Re: Lapin compris
Posté par 🚲 Tanguy Ortolo (site web personnel) . En réponse au journal Namecoin : DNS décentralisé ou BDD clé/valeur en p2p ?. Évalué à 2.
Comment cela s'utilise-t-il en pratique ? Toutes les X heures, récupérer l'annuaire Namecoin complet pour en faire une énorme zone DNS ?
[^] # Re: Lapin compris
Posté par 🚲 Tanguy Ortolo (site web personnel) . En réponse au journal Namecoin : DNS décentralisé ou BDD clé/valeur en p2p ?. Évalué à 6.
Désolé mais j'ai vraiment du mal à comprendre. Je sais comment fonctionne le DNS, ce qu'est un enregistrement, mais là faute d'explication c'est difficile.
Visiblement, Namecoin se détache assez fortement du DNS, en introduisant un annuaire dont les clefs sont je ne sais quoi, et dont les valeurs sont un ensemble de données qui n'ont pas grand chose à voir avec le DNS. Ça me semblerait plus proche du système WHOIS qui est utilisé par les registres de niveau supérieur pour en dériver le contenu de leurs zones de délégation. Si quelqu'un pouvait préciser un peu comment cela fonctionne, en utilisant des notations humaines (c'est à dire pas ce qui précède), ce serait bienvenu.
Ça c'est le genre d'information qui serait appréciable.
# NamePAN !
Posté par 🚲 Tanguy Ortolo (site web personnel) . En réponse au journal Namecoin : DNS décentralisé ou BDD clé/valeur en p2p ?. Évalué à 6.
Il fallait bien que quelqu'un la fasse :
# Lapin compris
Posté par 🚲 Tanguy Ortolo (site web personnel) . En réponse au journal Namecoin : DNS décentralisé ou BDD clé/valeur en p2p ?. Évalué à 5.
C'est curieux, j'ai lu plusieurs fois cette longue description, et je n'ai pas trouvé la réponse à la première question qui me vient à l'esprit : quelle tête ça a, un nom de domaine Namecoin ?
[^] # Re: Pas intéressant ?
Posté par 🚲 Tanguy Ortolo (site web personnel) . En réponse à la dépêche UEFI en question. Évalué à 8.
Ce n'est pas seulement une question de pilote. Je vous rappelle qu'ARM n'est pas une plate-forme standard comme le PC à la IBM, mais seulement un jeu d'instructions de processeur. En particulier, il n'existe pas de moyen standard de démarrer un ordinateur à base d'ARM, ni d'énumérer son matériel.
En pratique, cela signifie que chaque système d'exploitation doit être spécifiquement adapté pour chaque modèle à prendre en charge. Que pour chaque nouveau modèle, il faut effectuer un travail de portage spécifique du noyau, de l'installateur et du système d'amorçage.
Avoir des pilotes systématiquement intégrés au noyau Linux serait une bonne chose, mais ça ne suffira pas à régler le problème. En particulier, les distributions GNU/Linux usuelles ne pourront jamais s'installer et fonctionner simplement sur plus d'une poignée de modèles.
[^] # Re: Mauvaise distro, changer de distro
Posté par 🚲 Tanguy Ortolo (site web personnel) . En réponse au journal Quelle distribution restera dans l'esprit UNIX?. Évalué à 1.
Qu'est-ce que c'est que ce changement rapide d'utilisateur ? S'il s'agit de verrouiller l'écran de l'utilisateur existant puis lancer un nouvel écran de connexion sur tty8 et de laisse le nouvel utilisateur se connecter, c'est indépendant. Si c'est autre chose, ça sert à quoi au juste ?
[^] # Re: Il y a aussi umask les pingouins !
Posté par 🚲 Tanguy Ortolo (site web personnel) . En réponse au message maintenir les droits d'un group dans les sous dossiers. Évalué à 3.
Ça c'est pour tous les fichiers créés, donc lourd de conséquence.
[^] # Re: solution : setgid
Posté par 🚲 Tanguy Ortolo (site web personnel) . En réponse au message maintenir les droits d'un group dans les sous dossiers. Évalué à 2.
Non, ou alors tu as été flou en décrivant ton problème. Le setgid sur un répertoire sert à ce que le groupe des fichiers créés dedans soit celui de ce répertoire. Il ne sert pas à ce que les permissions de groupe des fichiers créés soient celles du répertoire.
[^] # Re: solution : setgid
Posté par 🚲 Tanguy Ortolo (site web personnel) . En réponse au message maintenir les droits d'un group dans les sous dossiers. Évalué à 3.
Ou mieux :
Comme ça, pas besoin de se préoccuper des autres permissions, elles ne seront pas modifiées.
# ACL par défaut
Posté par 🚲 Tanguy Ortolo (site web personnel) . En réponse au message maintenir les droits d'un group dans les sous dossiers. Évalué à 4.
Pour ça, il y a les ACL. En particulier, les ACL par défaut d'un répertoire, qui permettent de préciser les ACL à appliquer aux fichiers créés dans ce répertoire.
Il faut monter ton système de fichiers avec l'option
acl
. Ensuite, avecsetfact(1)
:[^] # Re: Mauvaise distro, changer de distro
Posté par 🚲 Tanguy Ortolo (site web personnel) . En réponse au journal Quelle distribution restera dans l'esprit UNIX?. Évalué à 1.
Eh bien, pam_group justement, c'est impeccable pour ça.
[^] # Re: Anonymisation ?
Posté par 🚲 Tanguy Ortolo (site web personnel) . En réponse à la dépêche MAT : Metadata Anonymisation Toolkit 0.3.2. Évalué à 2.
Texte brut en français.
[^] # Re: Nitpick
Posté par 🚲 Tanguy Ortolo (site web personnel) . En réponse au journal Écrire en vietnamien sur ma distrib préféré. Évalué à 3.
Ảnh ou nảnh, pour traduire « nimage » ?
[^] # Re: Tilde
Posté par 🚲 Tanguy Ortolo (site web personnel) . En réponse à la dépêche RPM 4.10 est sorti. Évalué à 2.
En revanche je ne sais pas si c'est négatif ou non : dpkg utilise un algorithme qui définit un ordre sur les numéros de version, mais le terme « négatif » n'a pas vraiment de sens ici. Si on devait créer ce terme et lui donner un sens, tout ce que j'y verrait c'est « inférieur à zéro », donc 0~rc1 serait négatif…
[^] # Re: vision UX
Posté par 🚲 Tanguy Ortolo (site web personnel) . En réponse au journal Diaspora mal engagé ?. Évalué à 7.
FOUTAISES !
[^] # Re: Marronnier
Posté par 🚲 Tanguy Ortolo (site web personnel) . En réponse au journal Diaspora mal engagé ?. Évalué à 4.
Pas tout à fait, maintenant c'est ______ GNU/________.
[^] # Re: Tilde
Posté par 🚲 Tanguy Ortolo (site web personnel) . En réponse à la dépêche RPM 4.10 est sorti. Évalué à 3.
Ah oui, en effet, 0~rc1 c'est inférieur à zéro. :-)
[^] # Re: Marronnier
Posté par 🚲 Tanguy Ortolo (site web personnel) . En réponse au journal Diaspora mal engagé ?. Évalué à 4.
Pourtant la ________ est plus grosse que la ________…
[^] # Re: Pourquoi Linux ne décolle pas
Posté par 🚲 Tanguy Ortolo (site web personnel) . En réponse au sondage Qu'utilisez vous pour l'installation de vos logiciels tiers ?. Évalué à 10.
Si : autopackage (qui s'appelle plutôt listaller aujourd'hui), 0install ou Glick2. S'ils utilisent autre chose c'est qu'ils souffrent de NIH.
Relis le titre du sondage : « Qu'utilisez vous pour l'installation de vos logiciels tiers ? » Dans ce contexte, « tiers » signifie : non disponible dans les dépôts de votre distribution.
# Tilde
Posté par 🚲 Tanguy Ortolo (site web personnel) . En réponse à la dépêche RPM 4.10 est sorti. Évalué à 9. Dernière modification le 01 juin 2012 à 14:25.
Pour être précis, le ~ est un caractère d'ordre négatif pour les numéros de versions. C'est à dire que 1.1~rc1 est inférieur à 1.1. Cela permet par exemple d'avoir les versions successives suivantes d'un logiciel :
Si vous voulez le détail : http://www.debian.org/doc/debian-policy/ch-controlfields.html#s-f-Version (pas vraiment évident à comprendre).
[^] # Re: Conclusion
Posté par 🚲 Tanguy Ortolo (site web personnel) . En réponse au journal Ta Fedora sera signée par Microsoft. Évalué à 7.
Une licence Windows, c'est un service.
[^] # Re: Historique de Michelin
Posté par 🚲 Tanguy Ortolo (site web personnel) . En réponse au journal Comparatif de principaux fournisseurs de cartes. Évalué à 9. Dernière modification le 01 juin 2012 à 11:47.
Pardon ? OpenStreetMap est d'origine britannique, et question classification des routes, c'est bien assez fourni : http://wiki.openstreetmap.org/wiki/FR:Key:highway#Valeurs
[^] # Re: Ça marche pas sous linux
Posté par 🚲 Tanguy Ortolo (site web personnel) . En réponse au journal Le Humble Indie Bundle n°5 est disponible. Évalué à 2. Dernière modification le 01 juin 2012 à 11:32.
Question : comment font les gens pour les systèmes propriétaires ? Parce que bon, des bibliothèques propriétaires, tu as encore moins le droit de te lier statiquement avec non ?